Crash's 69 K10 - Page 42 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Crash_OK · 05-16-2013, 10:36 PM

Quote:

Originally Posted by RCbowtie69

Hey Crash,the tailgate trim & taillight trim would set that black paint off.It would make the back end look really sharp & stand out.Looking good on the bed,keep on truckin''

Thanks..

Crash_OK · 05-16-2013, 10:38 PM

Quote:

Originally Posted by tsnow678

Your truck has come a long way due to all of your hard work and Kyle's paint and body skills! Looks slick! Did Kyle use a base/clear or single stage?

Thanks Tsnow..

Crash_OK · 05-16-2013, 10:52 PM

Picked the bed up at Kyle’s today and took it to the shop.

Kyle is still working on the tailgate. Hopefully it will be ready in a few days.

After I mounted the bed I decided to take it for a little drive to see if the new springs helped the ride. It now rides like a lifted 4x4 SWB. Much better than the old Sherman tank ride. It was worth the effort and time…

VA72C10 · 05-16-2013, 11:12 PM

Truck looks GREAT!!!

Crash_OK · 05-16-2013, 11:22 PM

Quote:

Originally Posted by VA72C10

Truck looks GREAT!!!

Thank you.

**screaminchevypickup** · 05-16-2013, 11:45 PM

Looks great mark!
Posted via Mobile Device

Zoomin · 05-17-2013, 12:03 AM

You drove it, and you don't have any outdoor pix?!?

That thang's beautiful Mark!
Posted via Mobile Device

Crash_OK · 05-17-2013, 12:09 AM

Quote:

Originally Posted by screaminchevypickup

Looks great mark!
Posted via Mobile Device

Thanks Kyle.. both for the comment and the great job you have done on the paint and body...

Crash_OK · 05-17-2013, 12:14 AM

Quote:

Originally Posted by Zoomin

You drove it, and you don't have any outdoor pix?!?

That thang's beautiful Mark!
Posted via Mobile Device

I know, I was going to take some of it outside, but I just forgot to do it. To be honest, I have been rushing around all day getting it ready so that I can start on a timing belt/water pump replacement on my Tundra in the morning (137000 miles). I wanted to make sure I had something to drive in case I need something while I have the Tundra tore down. If everything goes well I will get some outside pictures of it tomorrow.

mcbassin · 05-17-2013, 08:13 AM

The truck looks great! Awesome paint job. Hope to see it soon

Crash_OK · 05-18-2013, 06:54 AM

Thought I would post a few pictures of the truck outside of the shop..

mjensen · 05-18-2013, 10:15 AM

Absolutely stunning! I may have said this before, but I love those wheels. Kyle did a great job for you on the paint and bodywork...very impressive! I think I'll bag working on mine and just stare at your pictures all day

Crash_OK · 05-18-2013, 06:30 PM

Quote:

Originally Posted by mcbassin

The truck looks great! Awesome paint job. Hope to see it soon

Thanks Mike...

Crash_OK · 05-18-2013, 06:31 PM

Quote:

Originally Posted by mjensen

Absolutely stunning! I may have said this before, but I love those wheels. Kyle did a great job for you on the paint and bodywork...very impressive! I think I'll bag working on mine and just stare at your pictures all day

Thanks... you are right.. Kyle did a great job..

**rgunlock** · 05-18-2013, 08:25 PM

Looks amazing!!! Dang, you have got to be SO pleased with the way it turned out! So, tailgate is all and it's done?

Crash_OK · 05-18-2013, 10:10 PM

Quote:

Originally Posted by rgunlock

Looks amazing!!! Dang, you have got to be SO pleased with the way it turned out! So, tailgate is all and it's done?

Thanks.. I am pleased.. Tailgate, trim, bed liner, front end alignment, AC charged, and maybe swapping the steering sector out to a later model close ratio box. Wait, are you ever really finished..

Vintage Windmills · 05-18-2013, 11:06 PM

Very very nice, its got to feel great to look at it and drive it!

DD1 · 05-19-2013, 12:27 AM

The truck looks sweet! Awesome job! And I loved the Betty Boop protective blanket.

Everything is so nice and clean and shiny. It looks great.

DD1 · 05-19-2013, 12:31 AM

Is that a padded 2x4 and a engine hoist you used to lift the bed?

**cmabolt** · 05-19-2013, 09:21 PM

Congrats Crash!! Wow, really nice. Paint turned out great. I should be so lucky.
I'm inching closer all the time, but after seeing yours almost done realize how far I have to go.

Chris

Crash_OK · 05-19-2013, 09:23 PM

Quote:

Originally Posted by Vintage Windmills

Very very nice, its got to feel great to look at it and drive it!

Thanks.. you are right, it does feel great..

Crash_OK · 05-19-2013, 09:24 PM

Quote:

Originally Posted by DD1

The truck looks sweet! Awesome job! And I loved the Betty Boop protective blanket.

Everything is so nice and clean and shiny. It looks great.

Thanks.. yes the Betty Boop blanket worked great..

Crash_OK · 05-19-2013, 09:26 PM

Quote:

Originally Posted by DD1

Is that a padded 2x4 and a engine hoist you used to lift the bed?

No.. It is a piece of heavy metal c-channel. I used it for both the cab and the bed.

Crash_OK · 05-19-2013, 09:27 PM

Quote:

Originally Posted by cmabolt

Congrats Crash!! Wow, really nice. Paint turned out great. I should be so lucky.
I'm inching closer all the time, but after seeing yours almost done realize how far I have to go.

Chris

Thanks Chris...

mcbassin · 05-20-2013, 09:25 AM

Truck looks awesome Mark!

05-16-2013, 10:52 PM	#1028
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Crash's 69 K10 Picked the bed up at Kyle’s today and took it to the shop. Kyle is still working on the tailgate. Hopefully it will be ready in a few days. After I mounted the bed I decided to take it for a little drive to see if the new springs helped the ride. It now rides like a lifted 4x4 SWB. Much better than the old Sherman tank ride. It was worth the effort and time… __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

05-16-2013, 11:12 PM	#1029
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Crash's 69 K10 Truck looks GREAT!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2013, 11:45 PM	#1031
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Crash's 69 K10 Looks great mark! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-17-2013, 12:03 AM	#1032
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Crash's 69 K10 You drove it, and you don't have any outdoor pix?!? That thang's beautiful Mark! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

05-17-2013, 08:13 AM	#1035
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Crash's 69 K10 The truck looks great! Awesome paint job. Hope to see it soon __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-18-2013, 06:54 AM	#1036
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Crash's 69 K10 Thought I would post a few pictures of the truck outside of the shop.. __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

05-18-2013, 10:15 AM	#1037
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Crash's 69 K10 Absolutely stunning! I may have said this before, but I love those wheels. Kyle did a great job for you on the paint and bodywork...very impressive! I think I'll bag working on mine and just stare at your pictures all day __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

05-18-2013, 08:25 PM	#1040
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Re: Crash's 69 K10 Looks amazing!!! Dang, you have got to be SO pleased with the way it turned out! So, tailgate is all and it's done? __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500

05-18-2013, 11:06 PM	#1042
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Crash's 69 K10 Very very nice, its got to feel great to look at it and drive it! __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-19-2013, 12:27 AM	#1043
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Crash's 69 K10 The truck looks sweet! Awesome job! And I loved the Betty Boop protective blanket. Everything is so nice and clean and shiny. It looks great.

05-19-2013, 12:31 AM	#1044
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Crash's 69 K10 Is that a padded 2x4 and a engine hoist you used to lift the bed?

05-19-2013, 09:21 PM	#1045
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Crash's 69 K10 Congrats Crash!! Wow, really nice. Paint turned out great. I should be so lucky. I'm inching closer all the time, but after seeing yours almost done realize how far I have to go. Chris __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

05-20-2013, 09:25 AM	#1050
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Crash's 69 K10 Truck looks awesome Mark! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.