Truck cab to blazer conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wesleytucker454** · 02-08-2022, 12:03 AM

Does anyone have a link to any good threads where someone converted a truck cab to a blazer tub? I’ve searched and can’t find what I’m looking for. I’m planning to use my solid truck cab and replace the upper windshield frame with a donor frame or use new windshield frame pieces. Then going to cut and bend up the rear of the truck floor pan to mate to the step up panel. Trying to save money and use what I have rather than spending a load of extra $$ If I don’t have to. That stuff is hard to come by these days!

Thanks in advance!

Wes

**truckster** · 02-08-2022, 03:04 PM

I can't help much except for this - my understanding is that the windshield header in the Blazer has reinforcement the truck doesn't have.

Good luck.

**raggedjim** · 02-09-2022, 12:33 PM

https://67-72chevytrucks.com/vboard/...40&postcount=7

https://67-72chevytrucks.com/vboard/...d.php?t=655031

https://67-72chevytrucks.com/vboard/...ab#post8046261 (info on back flange)

**BIG ORANGE** · 02-14-2022, 11:16 PM

That's how I did mine but I didn't have a link to refer to, just measuring tape a welder, time and God given skills. Best of luck it's alot of work.....

02-08-2022, 12:03 AM	#1
wesleytucker454 Junior Member Join Date: Aug 2020 Location: Jacksonville, Arkansas Posts: 60	Truck cab to blazer conversion Does anyone have a link to any good threads where someone converted a truck cab to a blazer tub? I’ve searched and can’t find what I’m looking for. I’m planning to use my solid truck cab and replace the upper windshield frame with a donor frame or use new windshield frame pieces. Then going to cut and bend up the rear of the truck floor pan to mate to the step up panel. Trying to save money and use what I have rather than spending a load of extra $$ If I don’t have to. That stuff is hard to come by these days! Thanks in advance! Wes __________________ -1972 Chevrolet K10 LWB Pickup -1972 Chevrolet K20 Pickup -1972 Chevrolet K10 Suburban ... and counting

02-08-2022, 03:04 PM	#2
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,820	Re: Truck cab to blazer conversion I can't help much except for this - my understanding is that the windshield header in the Blazer has reinforcement the truck doesn't have. Good luck. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

02-09-2022, 12:33 PM	#3
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,392	Re: Truck cab to blazer conversion https://67-72chevytrucks.com/vboard/...40&postcount=7 https://67-72chevytrucks.com/vboard/...d.php?t=655031 https://67-72chevytrucks.com/vboard/...ab#post8046261 (info on back flange) __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd Last edited by raggedjim; 02-09-2022 at 12:41 PM.

02-14-2022, 11:16 PM	#4
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,745	Re: Truck cab to blazer conversion That's how I did mine but I didn't have a link to refer to, just measuring tape a welder, time and God given skills. Best of luck it's alot of work..... __________________ Things happen for a reason!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.