Conversion Kit - Front Drum Brakes To Disc Brakes - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**COBALT** · 05-20-2011, 05:49 PM

No the race should be INSIDE the rotor for both inner and outer bearings ALREADY! If not take them to a machine shop and have them installed. For used rotors you can buy replacements but getting the old ones out and getting the new ones in should be done by someone with the right equipment. The bearing goes in against the race, then the washer, then the spindle nut.

The way you described breaking down one at a junk yard is exactly correct.

05-20-2011, 05:49 PM	#26
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: Conversion Kit - Front Drum Brakes To Disc Brakes No the race should be INSIDE the rotor for both inner and outer bearings ALREADY! If not take them to a machine shop and have them installed. For used rotors you can buy replacements but getting the old ones out and getting the new ones in should be done by someone with the right equipment. The bearing goes in against the race, then the washer, then the spindle nut. The way you described breaking down one at a junk yard is exactly correct. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.