Full floor with supports - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bkwagonss · 09-29-2006, 01:16 AM

Wow, I was just getting ready to buy the full floor pan for my truck, when I noticed, on the Goodmark website, they are now offering the full floor pan "including all the floor supports already welded in"!!
No one even offers the z supports that run from front to back. I was going to have to make due and fix them.
It also has the rear cab support all the way across the back.
The picture is a lot better than the one for just the floor and now I can see it does include the inner rockers too.
I wish I didn't just buy all 4 floor supports, drat.

gringoloco · 09-29-2006, 01:23 AM

High Speed low Drag · 09-29-2006, 06:27 AM

I tried to order it. Goodmark said two months minimum for delivery. Seems they don't actually have the floors in stock yet. They are still being made.

Jim_PA · 09-29-2006, 07:32 AM

Oh wow, that's awesome -- Any price on that?

indyracer · 09-29-2006, 08:33 AM

I think the price is $499.

Tony

Joe67 · 09-29-2006, 11:39 AM

Now we're talking. I spoke with them a couple of months back and they were looking into it.

panhandler62 · 09-29-2006, 12:21 PM

That's a heck of a deal.

I notice that it's a "low hump" -- would I be able to make one into a "high hump" by cutting out the offending metal and drilling a few holes to attach my hump?

(I'm afraid if I say "hump" again this thing is going to get censored!)

Joe67 · 09-29-2006, 02:00 PM

Quote:

Originally Posted by panhandler62

That's a heck of a deal.

I notice that it's a "low hump" -- would I be able to make one into a "high hump" by cutting out the offending metal and drilling a few holes to attach my hump?

(I'm afraid if I say "hump" again this thing is going to get censored!)

Huh Huh, you said Hump

I don't see why that wouldn't work

69rut · 09-29-2006, 02:19 PM

I have almost finished my floor install. I would not have needed all of that, but it does save you from welding the floor supports. What a bear!

Aarons72s · 09-29-2006, 03:44 PM

I could have used that awhile back in my 72 orange and white. Nice to know if i need one down the road. Hay, maybe we are getting closer to new steal cabs!

jsbgump · 09-29-2006, 03:51 PM

I just wonder how well will it hold up verses the original

Greaser · 09-29-2006, 04:06 PM

The Story I Got Is That The Floor Pan W/o Braces Is Available, And Will Be Sold Until Gone, Then The Complete Floor Will Be Available, But Theres Quite A Bit Of Price Difference $299 W/o, 499 With.

Huck · 09-29-2006, 08:23 PM

Shippping could be interesting too ---but, I know a lot of guys who would gladly pay $499. to avoid cutting, welding, patching, piecing, etc.

Jim_PA · 09-29-2006, 09:01 PM

Quote:

Originally Posted by jsbgump

I just wonder how well will it hold up verses the original

My original was patched and snowballed together at least 15 years ago.

Can't imagine this could be a whole lot worse.

09-29-2006, 01:16 AM	#1
bkwagonss Junior Member Join Date: Jul 2005 Location: South Jersey Posts: 70	Full floor with supports Wow, I was just getting ready to buy the full floor pan for my truck, when I noticed, on the Goodmark website, they are now offering the full floor pan "including all the floor supports already welded in"!! No one even offers the z supports that run from front to back. I was going to have to make due and fix them. It also has the rear cab support all the way across the back. The picture is a lot better than the one for just the floor and now I can see it does include the inner rockers too. I wish I didn't just buy all 4 floor supports, drat. __________________ 1971 Short Stepside,(sold) 2011 Caprice PPV 1950 Chevy Fleetline Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=302759

09-29-2006, 01:23 AM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Full floor with supports __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-29-2006, 06:27 AM	#3
High Speed low Drag Registered User Join Date: Sep 2006 Location: Mechanicsville, Virginia Posts: 53	Re: Full floor with supports I tried to order it. Goodmark said two months minimum for delivery. Seems they don't actually have the floors in stock yet. They are still being made.

09-29-2006, 07:32 AM	#4
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Full floor with supports Oh wow, that's awesome -- Any price on that?

09-29-2006, 08:33 AM	#5
indyracer Registered User Join Date: Jul 2006 Location: Alexandria, IN Posts: 134	Re: Full floor with supports I think the price is $499. Tony __________________ Cheers, Tony A day without sunshine is like, you know, night. 1970 Chevy CST10 (Green) 2005 Silverado Z71 2000 Pontiac Bonneville

09-29-2006, 11:39 AM	#6
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: Full floor with supports Now we're talking. I spoke with them a couple of months back and they were looking into it. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

09-29-2006, 12:21 PM	#7
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: Full floor with supports That's a heck of a deal. I notice that it's a "low hump" -- would I be able to make one into a "high hump" by cutting out the offending metal and drilling a few holes to attach my hump? (I'm afraid if I say "hump" again this thing is going to get censored!) __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

09-29-2006, 02:19 PM	#9
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: Full floor with supports I have almost finished my floor install. I would not have needed all of that, but it does save you from welding the floor supports. What a bear! __________________ trailers are for boats

09-29-2006, 03:44 PM	#10
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Full floor with supports I could have used that awhile back in my 72 orange and white. Nice to know if i need one down the road. Hay, maybe we are getting closer to new steal cabs!

09-29-2006, 03:51 PM	#11
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Full floor with supports I just wonder how well will it hold up verses the original __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

09-29-2006, 04:06 PM	#12
Greaser Registered User Join Date: Aug 2006 Location: Worley, ID Posts: 48	Re: Full floor with supports The Story I Got Is That The Floor Pan W/o Braces Is Available, And Will Be Sold Until Gone, Then The Complete Floor Will Be Available, But Theres Quite A Bit Of Price Difference $299 W/o, 499 With. Attached Images

09-29-2006, 08:23 PM	#13
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: Full floor with supports Shippping could be interesting too ---but, I know a lot of guys who would gladly pay $499. to avoid cutting, welding, patching, piecing, etc.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.