|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-06-2022, 06:32 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2022
Location: Lucas, TX
Posts: 458
|
261 engine/distributor gasket?
I have the 1959 261 engine in my 53 pickup. The truck has a Vertex magnet that I just had tested/refurbished. When I removed it from the engine, there wasn't a cork gasket between the magneto/distributor hold down bracket and the block, although there is an indention on both the block and the bracket for what looks like one.
Has anyone found this elusive gasket?
__________________
1953 Chevy 3100 - 5 window 1/2 ton pickup My 1953 Chevy Work-In-Process Photo Gallery "I don't have a carbon footprint, I drive everywhere." Last edited by TX3100Guy; 08-06-2022 at 08:29 PM. |
|
|
|
08-07-2022, 10:37 PM
|
#2 |
|
Senior Member
Join Date: Mar 2022
Location: Lucas, TX
Posts: 458
|
Re: 261 engine distributor gasket?
I took out my calipers today and measured both the outer and inner dimensions of the hole for the distributor/magneto that are in the block to support some kind of gasket.
The outside dimension is 1 1/4 inches and the inside dimension is 1 1/16 inches, which is the diameter I measure on an old distributor shaft. Now to find a cork gasket of this size......
__________________
1953 Chevy 3100 - 5 window 1/2 ton pickup My 1953 Chevy Work-In-Process Photo Gallery "I don't have a carbon footprint, I drive everywhere." |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
