Intermediate Shaft Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cgster · 10-28-2023, 06:45 AM

I will be installing an aftermarket steering column in my 67 C10 so I also ordered the intermediate shaft as well. My question is, the intermediate shaft I ordered didn't come with any pin to insert in the hole (shown on attached pic). What kind of pin goes through this hole? Thanks.

Accelo · 10-28-2023, 07:11 AM

I believe the factory one is plastic. It's manufactured to shear if you are in an accident. That way you do have to have the full force of the steering column in your face.
If I was going with stock some type of aluminum or plastic screw may work. If you are going with a rack and pinion the funny angles required will likely collapse first.

My 1957 column is like a fence post in front of my face. IMHO that is really dangerous in a front end collision. Anything you do will be better that that.
Cheers

**1970cstblazer** · 10-28-2023, 07:48 AM

The factory injected nylon in those shafts, much like some of the OEM universal joints in mid '70-s newer applications.

cgster · 10-28-2023, 08:39 AM

Ok, thanks for the feedback. I wish one end of the nickel plated rod would have had a predrilled hole to insert pin through. Might be a pain drilling with a regular drill.

**zicc1835** · 10-29-2023, 09:34 PM

read up on your aftermarket column some are made to collapse on impact

**A1971Blazer** · 10-30-2023, 07:30 AM

I moved my steering column forward about 1¼" , so I had to take the intermediate shaft apart to shorten it.
The engagement of the two halves is fairly long so I didn't worry about trying to put anything back in the holes.
There's no play in the joint when slid together.
it's in a fixed position with the column clamped down and the rag joint fastened in, it's unlikely to come apart very easily
and will still collapse in the event of a frontal impact.

cgster · 10-30-2023, 02:31 PM

Quote:

Originally Posted by A1971Blazer

I moved my steering column forward about 1¼" , so I had to take the intermediate shaft apart to shorten it.
The engagement of the two halves is fairly long so I didn't worry about trying to put anything back in the holes.
There's no play in the joint when slid together.
it's in a fixed position with the column clamped down and the rag joint fastened in, it's unlikely to come apart very easily
and will still collapse in the event of a frontal impact.

Thanks, I may end up doing the same thing.

10-28-2023, 06:45 AM	#1
cgster Registered User Join Date: Aug 2015 Location: Texas Posts: 324	Intermediate Shaft Question I will be installing an aftermarket steering column in my 67 C10 so I also ordered the intermediate shaft as well. My question is, the intermediate shaft I ordered didn't come with any pin to insert in the hole (shown on attached pic). What kind of pin goes through this hole? Thanks. Attached Images

10-28-2023, 07:11 AM	#2
Accelo Registered User Join Date: Mar 2015 Location: washington Posts: 2,162	Re: Intermediate Shaft Question I believe the factory one is plastic. It's manufactured to shear if you are in an accident. That way you do have to have the full force of the steering column in your face. If I was going with stock some type of aluminum or plastic screw may work. If you are going with a rack and pinion the funny angles required will likely collapse first. My 1957 column is like a fence post in front of my face. IMHO that is really dangerous in a front end collision. Anything you do will be better that that. Cheers

10-28-2023, 07:48 AM	#3
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,287	Re: Intermediate Shaft Question The factory injected nylon in those shafts, much like some of the OEM universal joints in mid '70-s newer applications. __________________ 1970 K/5 Blazer CST 4WD, Bronze, 93k ACT. miles, 350, 4 speed, positraction, 16.5" x 8.25" wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration in progress... 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 41k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 60k miles, 3.6, 8L45, 3.23 LS, 18" wheels

10-28-2023, 08:39 AM	#4
cgster Registered User Join Date: Aug 2015 Location: Texas Posts: 324	Re: Intermediate Shaft Question Ok, thanks for the feedback. I wish one end of the nickel plated rod would have had a predrilled hole to insert pin through. Might be a pain drilling with a regular drill.

10-29-2023, 09:34 PM	#5
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,111	Re: Intermediate Shaft Question read up on your aftermarket column some are made to collapse on impact __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

10-30-2023, 07:30 AM	#6
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,107	Re: Intermediate Shaft Question I moved my steering column forward about 1¼" , so I had to take the intermediate shaft apart to shorten it. The engagement of the two halves is fairly long so I didn't worry about trying to put anything back in the holes. There's no play in the joint when slid together. it's in a fixed position with the column clamped down and the rag joint fastened in, it's unlikely to come apart very easily and will still collapse in the event of a frontal impact. __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.