newbie here with 64 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shoei1993 · 08-09-2010, 09:42 PM

i got this truck last december for a $1000. But now up to date i just got a bed 3 weeks ago for $100. It has a 350 small block 4 bolt main backing it is muncie 4 speed close ratio and the rear end is a 12bolt posi

Alan's Classic · 08-09-2010, 10:19 PM

and welcome aboard. Looks pretty solid. What's the plans?

shoei1993 · 08-09-2010, 11:37 PM

Thanks, well i want to lower it some relocate gas tank under the bed also i want to put a 383 stroker in it. And i im going to get some slotted mags. Also put disc brakes on the front. tub the back wheel wells. but its hard to get money since im only 16, but i bought ever thing for it so far. Thats for now

shoei1993 · 08-09-2010, 11:50 PM

here is the in side

**chev-obsession** · 08-09-2010, 11:50 PM

thats a sweet truck! i wished my high school truck had a muncie 4 speed like yours. keep that tans!!! girls dig the old trucks (especially when they are fixed up) .....believe me! if you go with your plans it will be a bad a$$ truck

shoei1993 · 08-09-2010, 11:55 PM

I need to get a patch for the floor; what is a good site to get one? thanks

shoei1993 · 08-10-2010, 12:12 AM

Quote:

Originally Posted by chev-obsession

thats a sweet truck! i wished my high school truck had a muncie 4 speed like yours. keep that tans!!! girls dig the old trucks (especially when they are fixed up) .....believe me! if you go with your plans it will be a bad a$$ truck

yep thanks

**Captainfab** · 08-10-2010, 01:06 AM

Welcome to the forum

Looks like you've got a good truck to build up. I agree, I'd keep that trans, that just adds to the fun factor IMO.

For patch panels, I would try a couple of our board vendors here like MBGMike, and Topbanana. You can find them in the classifieds here on the forums. There is also a Vendors Marketplace in the classifieds. If you decide you want power steering and power brakes, let me know, I have brackets for those.

Quote:

Originally Posted by shoei1993

I need to get a patch for the floor; what is a good site to get one? thanks

shoei1993 · 08-10-2010, 01:17 AM

Quote:

Originally Posted by Captainfab

Welcome to the forum

Looks like you've got a good truck to build up. I agree, I'd keep that trans, that just adds to the fun factor IMO.

For patch panels, I would try a couple of our board vendors here like MBGMike, and Topbanana. You can find them in the classifieds here on the forums. There is also a Vendors Marketplace in the classifieds. If you decide you want power steering and power brakes, let me know, I have brackets for those.

yeah thanks, I am going to keep the trans I love it it's so esay to light up

MacAttack · 08-10-2010, 07:11 PM

Congratulations on a really nice score!

Looks like you're on your way and that ol' truck will bring many hours of fun. For the money in / usefulness out - our trucks are hard to beat. Great pics too!

Mac.

shoei1993 · 08-10-2010, 07:57 PM

thanks Mac

shoei1993 · 08-11-2010, 08:34 PM

This is what the truck looked like when i got it it didnt run or have brakes that worked.

protrash64 · 08-11-2010, 09:02 PM

from AZ. Whats up with the blue ms/cyl?? Looks like a good truck to mess with.

shoei1993 · 08-11-2010, 09:09 PM

Quote:

Originally Posted by protrash64

from AZ. Whats up with the blue ms/cyl?? Looks like a good truck to mess with.

well it was the only spray paint i had at that time

oldblue1968chevy · 08-11-2010, 10:08 PM

ditch the air filter, ive heard bad things about them. other than that nice! I got my 68 @ 16...check my build thread out! (bottom of sig.) KEEP THE 4SPD. i WANT OEN!

shoei1993 · 08-11-2010, 10:16 PM

Quote:

Originally Posted by oldblue1968chevy

ditch the air filter, ive heard bad things about them. other than that nice! I got my 68 @ 16...check my build thread out! (bottom of sig.) KEEP THE 4SPD. i WANT OEN!

yeah thanks, im going to get rid of the air filter i hate it it is ugly

oldblue1968chevy · 08-11-2010, 10:34 PM

the carb will backfire and catch it on fire..lol

shoei1993 · 08-11-2010, 11:31 PM

Quote:

Originally Posted by oldblue1968chevy

the carb will backfire and catch it on fire..lol

lol that has happend twice it has some burn marks on the foam i real need to change it bad

**Bugeyev8** · 08-12-2010, 09:24 PM

Quote:

Originally Posted by shoei1993

lol that has happend twice it has some burn marks on the foam i real need to change it bad

trucks looking good, It looks like a great start, I am a local Ca guy, I hit all the pick n pulls and swaps in the area, hit me up if you are searching for parts or to meet up and BS about old trucks!!

oldblue1968chevy · 08-12-2010, 09:49 PM

if you were closer id give you my snorkel stock air breather, i upgraded...sorry not gonna ship it, but if you plan on commin thru tn anytime soon, holler at me lol

shoei1993 · 08-12-2010, 11:14 PM

Quote:

Originally Posted by Bugeyev8

trucks looking good, It looks like a great start, I am a local Ca guy, I hit all the pick n pulls and swaps in the area, hit me up if you are searching for parts or to meet up and BS about old trucks!!

thanks i'll probably need some parts. But we can hang out one of these days

shoei1993 · 08-12-2010, 11:19 PM

Quote:

Originally Posted by oldblue1968chevy

if you were closer id give you my snorkel stock air breather, i upgraded...sorry not gonna ship it, but if you plan on commin thru tn anytime soon, holler at me lol

i dont think i'll be come up that way soon at all

shoei1993 · 08-13-2010, 02:53 PM

do you guys know what jeep spring work for lowering the rear??? Also went to pick and poll some tail gate cabels

**Bugeyev8** · 08-13-2010, 03:19 PM

Quote:

Originally Posted by shoei1993

do you guys know what jeep spring work for lowering the rear??? Also went to pick and poll some tail gate cabels

Its the later Jeel Grand Cherokees, grab a set of rear door check straps from a standard Cherokee when you are there, they fit our trucks perfect, I used a tailgate latch assy from a late 90s S10, I can show you how to do it if you want, I have lots of pics of it

**Bugeyev8** · 08-13-2010, 03:32 PM

2 more pics

08-09-2010, 09:42 PM	#1
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	newbie here with 64 c10 i got this truck last december for a $1000. But now up to date i just got a bed 3 weeks ago for $100. It has a 350 small block 4 bolt main backing it is muncie 4 speed close ratio and the rear end is a 12bolt posi Attached Images

08-09-2010, 10:19 PM	#2
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: newbie here with 64 c10 and welcome aboard. Looks pretty solid. What's the plans? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker" Last edited by Alan's Classic; 08-09-2010 at 10:20 PM.

08-09-2010, 11:37 PM	#3
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 Thanks, well i want to lower it some relocate gas tank under the bed also i want to put a 383 stroker in it. And i im going to get some slotted mags. Also put disc brakes on the front. tub the back wheel wells. but its hard to get money since im only 16, but i bought ever thing for it so far. Thats for now

08-09-2010, 11:50 PM	#4
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 here is the in side Attached Images

08-09-2010, 11:50 PM	#5
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,469	Re: newbie here with 64 c10 thats a sweet truck! i wished my high school truck had a muncie 4 speed like yours. keep that tans!!! girls dig the old trucks (especially when they are fixed up) .....believe me! if you go with your plans it will be a bad a$$ truck __________________ 1965 c/10 swb 1969 c/10 lwb

08-09-2010, 11:55 PM	#6
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 I need to get a patch for the floor; what is a good site to get one? thanks

08-10-2010, 07:11 PM	#10
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: newbie here with 64 c10 Congratulations on a really nice score! Looks like you're on your way and that ol' truck will bring many hours of fun. For the money in / usefulness out - our trucks are hard to beat. Great pics too! Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

08-10-2010, 07:57 PM	#11
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 thanks Mac

08-11-2010, 08:34 PM	#12
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 This is what the truck looked like when i got it it didnt run or have brakes that worked. Attached Images

08-11-2010, 09:02 PM	#13
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: newbie here with 64 c10 from AZ. Whats up with the blue ms/cyl?? Looks like a good truck to mess with. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

08-11-2010, 10:08 PM	#15
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: newbie here with 64 c10 ditch the air filter, ive heard bad things about them. other than that nice! I got my 68 @ 16...check my build thread out! (bottom of sig.) KEEP THE 4SPD. i WANT OEN! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-11-2010, 10:34 PM	#17
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: newbie here with 64 c10 the carb will backfire and catch it on fire..lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-12-2010, 09:49 PM	#20
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: newbie here with 64 c10 if you were closer id give you my snorkel stock air breather, i upgraded...sorry not gonna ship it, but if you plan on commin thru tn anytime soon, holler at me lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-13-2010, 02:53 PM	#23
shoei1993 Registered User Join Date: Jul 2010 Location: stockton ca Posts: 26	Re: newbie here with 64 c10 do you guys know what jeep spring work for lowering the rear??? Also went to pick and poll some tail gate cabels

08-13-2010, 03:32 PM	#25
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: newbie here with 64 c10 2 more pics Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.