The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-19-2016, 12:07 PM   #1
Lefkada
Registered User
 
Join Date: Dec 2015
Location: San Diego, CA
Posts: 51
'72 C20 Lift

I have searched the forums and have called Rancho Lifts, Tuff County, 4 Wheel Parts, ORW and Moog, but still haven't found a good solution.

I have a '72 C20 (2WD LWB) with original, sagging front coil springs and sagging rear leaf springs. I'd like to get the truck 2-4" above stock height, but cannot find a method to do this. All lift kits I've found online are designed for 4x4's, which have front leaf springs, and I haven't found front coil springs with lift above stock height.

Has anyone found a solution to this? Sorry if this has been answered before.
__________________
1972 C/20 LWB, 350/350
Lefkada is offline   Reply With Quote
Old 01-19-2016, 12:12 PM   #2
hugger6933
Registered User
 
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,257
Re: '72 C20 Lift

Big Block camper springs[or one ton] with a spacer and rearched rear leafs?
hugger6933 is offline   Reply With Quote
Old 01-19-2016, 12:41 PM   #3
Lefkada
Registered User
 
Join Date: Dec 2015
Location: San Diego, CA
Posts: 51
Re: '72 C20 Lift

It sounds like this will be the best option. Are there any big issues with using coil spacers?
__________________
1972 C/20 LWB, 350/350
Lefkada is offline   Reply With Quote
Old 01-21-2016, 10:37 PM   #4
derotoreut
Roto Reuter thats the name...
 
derotoreut's Avatar
 
Join Date: Feb 2010
Location: Darien, NY
Posts: 1,848
Re: '72 C20 Lift

When I did my front disc conversion on my 69 C20 I changed out the front springs. Never did anything with the rears. I installed some HD springs (P/N 2772074) bought from NAPA. Tires didn't rub at all. They were 285/70-17 tires with H2 Hummer wheels. The ride was a bit stiff, but hey it's a 3/4 ton truck. Here's a comparison of the springs:

The stock HD C20 springs are as follows:

http://www.napaonline.com/Catalog/Ca...752_0162319756

Part No.: 2771752
No. of Coils: 7.92
Free Height: 12.94"
Spring ID: 3.68"
Spring Load Height: 10"
Design Load: 2950
Spring Rate: 1016
Wire Diameter: 0.812"

The springs I put on from C10, C20, C30 from 1973-83. They are as follows:

http://www.napaonline.com/Catalog/Ca...074_0162301536

Part No.: 2772074
No. of Coils: 8
Free Height: 13.61"
Spring ID: 3.676"
Spring Load Height: 10"
Design Load: 3841
Spring Rate: 1060
Wire Diameter: 0.83"

You could also use C30 mid '80's 1-ton springs, but I thought they would be too stiff. Those are:

http://www.napaonline.com/Catalog/Ca...085_0162304063

Part No.: 2773085
No. of Coils: 7.93
Free Height: 13.34"
Spring ID: 3.65"
Spring Load Height: 11"
Design Load: 3289
Spring Rate: 1318
Wire Diameter: 0.906"
Attached Images
 
__________________
~ Dan
My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232
My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394

1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt
1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project

"Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977
derotoreut is offline   Reply With Quote
Old 01-21-2016, 11:21 PM   #5
1968aj
Registered User
 
Join Date: Apr 2009
Location: houston texas
Posts: 1,438
Re: '72 C20 Lift

I just want to raise the front of my c20 to make it sit level. would these napa springs help?
Attached Images
 
1968aj is offline   Reply With Quote
Old 01-22-2016, 11:47 AM   #6
Lefkada
Registered User
 
Join Date: Dec 2015
Location: San Diego, CA
Posts: 51
Re: '72 C20 Lift

This was a huge help! Thanks a ton.
__________________
1972 C/20 LWB, 350/350
Lefkada is offline   Reply With Quote
Old 01-22-2016, 01:43 PM   #7
derotoreut
Roto Reuter thats the name...
 
derotoreut's Avatar
 
Join Date: Feb 2010
Location: Darien, NY
Posts: 1,848
Re: '72 C20 Lift

Quote:
Originally Posted by 1968aj View Post
I just want to raise the front of my c20 to make it sit level. would these napa springs help?
Should help. Brought up the front end and leveled out mine.
__________________
~ Dan
My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232
My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394

1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt
1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project

"Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977
derotoreut is offline   Reply With Quote
Reply

Bookmarks

Tags
coil, leaf, lift

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com