TBI Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Redden05 · 02-04-2009, 10:25 PM

I have all the wiring, intake, distributor, coil, throttle body, computer, really anything that I thought it might involve. This came out of a 87 C10 2WD with a 350 and a 700R4 transmission. The only things I don't have are the distributor cap and the plug wires, but I'm sure you would put new on anyways (or at least I would). $180 plus shipping. Thanks.

Pictures:

I have the MAP sensor somewhere.

Knock Sensor and Oil gauge sender.

Front Wiring Harness. Headlights and such.

02-04-2009, 10:25 PM	#1
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	TBI Setup I have all the wiring, intake, distributor, coil, throttle body, computer, really anything that I thought it might involve. This came out of a 87 C10 2WD with a 350 and a 700R4 transmission. The only things I don't have are the distributor cap and the plug wires, but I'm sure you would put new on anyways (or at least I would). $180 plus shipping. Thanks. Pictures: I have the MAP sensor somewhere. Knock Sensor and Oil gauge sender. Front Wiring Harness. Headlights and such. Last edited by Redden05; 03-28-2009 at 09:16 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.