What should I do with this CL find 6.0L LQ9 ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**biketopia** · 08-30-2021, 12:50 PM

The plastic intakes are super intakes, they will make great power n/a and will take quite a lot of boost if you wanted to go that route too. Or just spend a bunch of money and do a holley high rise! Holley, edelbrock and trick flow to name a few all make a nice single plane aluminum that will work decently well with you're goals if you spec the cam accordingly. Would have the injectors in a stock location and then you'd either need to run a 4150 throttle body or an elbow and the appropriate throttle body.

jjzepplin · 08-30-2021, 05:21 PM

Quote:

Originally Posted by biketopia

The plastic intakes are super intakes, they will make great power n/a and will take quite a lot of boost if you wanted to go that route too. Or just spend a bunch of money and do a holley high rise! Holley, edelbrock and trick flow to name a few all make a nice single plane aluminum that will work decently well with you're goals if you spec the cam accordingly. Would have the injectors in a stock location and then you'd either need to run a 4150 throttle body or an elbow and the appropriate throttle body.

Alright, So I am seeing some TBSS units with 50lb injectors for about $500. Might go that way.

08-30-2021, 12:50 PM	#1
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,009	Re: What should I do with this CL find 6.0L LQ9 ? The plastic intakes are super intakes, they will make great power n/a and will take quite a lot of boost if you wanted to go that route too. Or just spend a bunch of money and do a holley high rise! Holley, edelbrock and trick flow to name a few all make a nice single plane aluminum that will work decently well with you're goals if you spec the cam accordingly. Would have the injectors in a stock location and then you'd either need to run a 4150 throttle body or an elbow and the appropriate throttle body. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.