My winter project - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Willowrun** · 06-22-2022, 10:10 AM

Great work on your project. I’m not sure I saw you mention what brand seat covers you went with. Do you mind sharing?

**7D2N** · 06-22-2022, 09:23 PM

Quote:

Originally Posted by Willowrun

Great work on your project. I’m not sure I saw you mention what brand seat covers you went with. Do you mind sharing?

Thanks Willowrun, I bought the covers from Classisparts and the manufacturer is PUI. I have got the side panels and now seat foam from them also.

**Willowrun** · 06-22-2022, 11:34 PM

Thanks for the info. I bought the same set for my blazer from a board member a while back but no telling when I’ll get around to installing it so interested to see how it works out for you.

**7D2N** · 07-06-2022, 09:23 PM

I'm finished with my fiberglass work. Now some filler, texture, and paint. I did repair a couple of rounded corners.
7D2N

**7D2N** · 08-24-2022, 09:39 PM

Small update on the hatch repair. I'm doing the body filler over the fiberglass repairs and going to use this top, has some issues but is better in the long run.

**7D2N** · 09-20-2022, 08:08 PM

I finished the repairs on my top and had it Raptor Lined. I planned to try the raptor coating myself but if you add the cost of the product, misc things, and clean up sometimes it's better left in the pro's hands.

jaros44sr · 09-21-2022, 08:56 AM

Terrific work,as usual. Always enjoy your updates

TheKorndog · 09-21-2022, 04:16 PM

Incredible going through start to now and watching the progress. I am in the chassis/fuel & brake line phase of mine.

I noticed that you said those seats weren't factory to your Blazer-what were they out of? I am still looking for something low-backed that I can get that are as close to the original as possible. Original buckets would be ideal but ya know how that goes...

**7D2N** · 09-21-2022, 07:13 PM

Quote:

Originally Posted by jaros44sr

Terrific work,as usual. Always enjoy your updates

Thanks, Jim your B pillar work is turning out great.

7D2N

**7D2N** · 09-21-2022, 07:25 PM

Quote:

Originally Posted by TheKorndog

Incredible going through start to now and watching the progress. I am in the chassis/fuel & brake line phase of mine.

I noticed that you said those seats weren't factory to your Blazer-what were they out of? I am still looking for something low-backed that I can get that are as close to the original as possible. Original buckets would be ideal but ya know how that goes...

Korn, When I got the blazer it had some sort of swivel van seats. I was lucky enough to find some original bucket seats that needed work.
7D2N

jaros44sr · 09-22-2022, 05:17 AM

Quote:

Originally Posted by 7D2N

Thanks, Jim your B pillar work is turning out great.

7D2N

thanks but alot more work then I expected.....

**7D2N** · 10-15-2022, 08:59 PM

Hatches repaired. I used the NAPA stone guard for the texture and the 521GM paint. Thanks to Deadman for sharing what he used on his top.

**7D2N** · 10-15-2022, 09:05 PM

more

**7D2N** · 10-29-2022, 05:29 PM

I have the seats covered and installed until the carpet.

**7D2N** · 11-01-2022, 09:34 PM

Top and hatch seals showed up and they seem to fit well. How do you guys get them to stick in place? hope not to use messy weather strip glue.
Thanks

**1rippen6** · 11-02-2022, 01:58 PM

You're missing a piece that bolts on with your latch, sorry, if you already knew it.

**7D2N** · 11-02-2022, 07:31 PM

Quote:

Originally Posted by 1rippen6

You're missing a piece that bolts on with your latch, sorry, if you already knew it.

I have these but should they be the same size? also, would you know if the latch rods are in the right position to install?
Thanks

**1rippen6** · 11-02-2022, 09:15 PM

Quote:

Originally Posted by 7D2N

I have these but should they be the same size? also, would you know if the latch rods are in the right position to install?
Thanks

Yes, 2 different sizes on them, I have a picture somewhere that I use, I'll see if I can find it.

**7D2N** · 11-16-2022, 10:11 PM

The top is complete and ready to be checked off the list.

**1rippen6** · 11-16-2022, 10:25 PM

Sorry, just realized I forgot about you.

**7D2N** · 11-17-2022, 08:03 PM

Quote:

Originally Posted by 1rippen6

Sorry, just realized I forgot about you.

Dwayne No problem at all, I just had to study for a bit.

**1rippen6** · 11-18-2022, 11:12 AM

Quote:

Originally Posted by 7D2N

Dwayne No problem at all, I just had to study for a bit.

Glad you figured it out.

**7D2N** · 12-01-2022, 09:08 PM

I got my carpet kit in the back and seems to fit pretty well.

**7D2N** · 12-08-2022, 07:33 PM

A couple more things I can check off my list. The front carpet is in for now and not sure if I will go with a noise barrier or something like that. I cleaned up and painted the console.

jaros44sr · 12-08-2022, 08:17 PM

Sure is looking good, nice progress

06-22-2022, 10:10 AM	#226
Willowrun Senior Member Join Date: Mar 2013 Location: Ann Arbor, MI Posts: 1,021	Re: My winter project Great work on your project. I’m not sure I saw you mention what brand seat covers you went with. Do you mind sharing?

06-22-2022, 11:34 PM	#228
Willowrun Senior Member Join Date: Mar 2013 Location: Ann Arbor, MI Posts: 1,021	Re: My winter project Thanks for the info. I bought the same set for my blazer from a board member a while back but no telling when I’ll get around to installing it so interested to see how it works out for you.

07-06-2022, 09:23 PM	#229
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project I'm finished with my fiberglass work. Now some filler, texture, and paint. I did repair a couple of rounded corners. 7D2N Attached Images __________________ Just for the fun of it

08-24-2022, 09:39 PM	#230
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project Small update on the hatch repair. I'm doing the body filler over the fiberglass repairs and going to use this top, has some issues but is better in the long run. Attached Images __________________ Just for the fun of it

09-20-2022, 08:08 PM	#231
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project I finished the repairs on my top and had it Raptor Lined. I planned to try the raptor coating myself but if you add the cost of the product, misc things, and clean up sometimes it's better left in the pro's hands. Attached Images __________________ Just for the fun of it

09-21-2022, 08:56 AM	#232
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: My winter project Terrific work,as usual. Always enjoy your updates __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-21-2022, 04:16 PM	#233
TheKorndog Registered User Join Date: Sep 2016 Location: Rapid City USA Posts: 59	Re: My winter project Incredible going through start to now and watching the progress. I am in the chassis/fuel & brake line phase of mine. I noticed that you said those seats weren't factory to your Blazer-what were they out of? I am still looking for something low-backed that I can get that are as close to the original as possible. Original buckets would be ideal but ya know how that goes... __________________ 1972 Chevy Blazer K5/CST 4x4 Stroked L31 & serpentine belt system (97 C1500 donor); K case 4L60e; Fitech GoEFI 4; In Tank retrofitted fuel pump tnk-pa-6; Fitech GoShift controller; 12 bolt Yukon gear posi 3.73 rear diff; NP205; Redhead steering gear; JB Custom Fab NP205 twin sticks

10-15-2022, 08:59 PM	#237
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project Hatches repaired. I used the NAPA stone guard for the texture and the 521GM paint. Thanks to Deadman for sharing what he used on his top. Attached Images __________________ Just for the fun of it Last edited by 7D2N; 11-01-2022 at 09:44 PM.

10-15-2022, 09:05 PM	#238
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project more Attached Images __________________ Just for the fun of it

10-29-2022, 05:29 PM	#239
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project I have the seats covered and installed until the carpet. Attached Images __________________ Just for the fun of it Last edited by 7D2N; 11-01-2022 at 09:45 PM.

11-01-2022, 09:34 PM	#240
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project Top and hatch seals showed up and they seem to fit well. How do you guys get them to stick in place? hope not to use messy weather strip glue. Thanks Attached Images __________________ Just for the fun of it

11-02-2022, 01:58 PM	#241
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: My winter project You're missing a piece that bolts on with your latch, sorry, if you already knew it.

11-16-2022, 10:11 PM	#244
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project The top is complete and ready to be checked off the list. Attached Images __________________ Just for the fun of it

11-16-2022, 10:25 PM	#245
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: My winter project Sorry, just realized I forgot about you.

12-01-2022, 09:08 PM	#248
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project I got my carpet kit in the back and seems to fit pretty well. Attached Images __________________ Just for the fun of it



Register or Log In To remove these advertisements.

12-08-2022, 07:33 PM	#249
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 645	Re: My winter project A couple more things I can check off my list. The front carpet is in for now and not sure if I will go with a noise barrier or something like that. I cleaned up and painted the console. Attached Images __________________ Just for the fun of it

12-08-2022, 08:17 PM	#250
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: My winter project Sure is looking good, nice progress __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Register or Log In To remove these advertisements.