Shorter cab/bed mounts....... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 with 350 TPI · 06-18-2002, 04:54 PM

I was thinking about putting on some new cab and bed mounts and I seen that they are pretty thick.

On my camaro I have some aluminum body mounts as well as solid motor mouns/trans mounts... but its a drag car and I dont mind it so much on it.

Has anyone tryed to put on thinner mounts on the truck to drop the body a little bit ?

I would like to get some sort of polly mount to replace the soft(or dry rotted) rubber mounts that I have now.
But Im trying not to get the harsh aluminum style I have on my camaro.

Any ideas welcome

Longhorn Man · 06-18-2002, 05:19 PM

You could do that, but you'd havew a hard time doing the bed and front clip dropped easily.

06-18-2002, 04:54 PM	#1
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	Shorter cab/bed mounts....... I was thinking about putting on some new cab and bed mounts and I seen that they are pretty thick. On my camaro I have some aluminum body mounts as well as solid motor mouns/trans mounts... but its a drag car and I dont mind it so much on it. Has anyone tryed to put on thinner mounts on the truck to drop the body a little bit ? I would like to get some sort of polly mount to replace the soft(or dry rotted) rubber mounts that I have now. But Im trying not to get the harsh aluminum style I have on my camaro. Any ideas welcome __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

06-18-2002, 05:19 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	You could do that, but you'd havew a hard time doing the bed and front clip dropped easily.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.