I need help identifying doors. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Toms67 · 11-01-2016, 06:40 AM

Going to look at a couple doors today. They are off of 68. I am putting them on my 67. I need to know how to tell if they are OEM or aftermarket. Appreciate your help on this matter. Thanks.

**CUSTOM/10** · 11-01-2016, 06:48 AM

One of the easiest ways to tell is look at the bottom front inner corner of the doors. OEM should have a triangle shaped double wall or bubble in this area ( if they haven't had repairs ), repop doors are just flat sheet metal in this area ( until very recently, some repops have added this detail, but not many are out there ). This is the very front inner botom corner !

Gary

Toms67 · 11-01-2016, 06:52 AM

Thank you very much. I will take a picture of mine. And take it with me. Thank you for your help.

**CUSTOM/10** · 11-01-2016, 07:02 AM

This pic shows it but not close up ! Bottom right corner of door you can see the triangle.

Toms67 · 11-01-2016, 08:43 AM

Found it on my door. Thank you.

11-01-2016, 06:40 AM	#1
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	I need help identifying doors. Going to look at a couple doors today. They are off of 68. I am putting them on my 67. I need to know how to tell if they are OEM or aftermarket. Appreciate your help on this matter. Thanks.

11-01-2016, 06:48 AM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,796	Re: I need help identifying doors. One of the easiest ways to tell is look at the bottom front inner corner of the doors. OEM should have a triangle shaped double wall or bubble in this area ( if they haven't had repairs ), repop doors are just flat sheet metal in this area ( until very recently, some repops have added this detail, but not many are out there ). This is the very front inner botom corner ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 11-01-2016 at 06:55 AM.

11-01-2016, 06:52 AM	#3
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: I need help identifying doors. Thank you very much. I will take a picture of mine. And take it with me. Thank you for your help.

11-01-2016, 07:02 AM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,796	Re: I need help identifying doors. This pic shows it but not close up ! Bottom right corner of door you can see the triangle. Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

11-01-2016, 08:43 AM	#5
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: I need help identifying doors. Found it on my door. Thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.