The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Suspension, Steering and Brakes > Wheels and Tires

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-23-2017, 11:39 AM   #1
swissarmychainsaw
Registered User
 
Join Date: Jun 2009
Location: san francisco, ca (east bay)
Posts: 674
Keep 15s or go 17?

I have a K10 Suburban (6 lug) 1973.

Selection for 15" tires are somewhat limited these day. I want to go tall and skinny, something like 33" tall x 8 wide.

At 15" all the 33" tires are 12.5 wide.

Should I ditch the stock 15" and go 17" aftermarket or newer stock wheels?

Anyone done this?

thanks!
swissarmychainsaw is offline   Reply With Quote
Old 05-24-2017, 10:50 PM   #2
68c10airstream
Registered User
 
68c10airstream's Avatar
 
Join Date: Mar 2013
Location: Marquette michigan
Posts: 828
Re: Keep 15s or go 17?

Isn't the 6 lug wheels from late model gm 1/2 ton trucks the same bolt pattern? If so anything on a late model of interest? Usually nice looking and a junk yard would probably have something in the 17" to 18" range.
68c10airstream is offline   Reply With Quote
Old 05-30-2022, 08:06 PM   #3
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 6,956
Re: Keep 15s or go 17?

Quote:
Originally Posted by 68c10airstream View Post
Isn't the 6 lug wheels from late model gm 1/2 ton trucks the same bolt pattern? If so anything on a late model of interest? Usually nice looking and a junk yard would probably have something in the 17" to 18" range.
The bolt pattern of 6 Lugs @ 5.5'' spacing is the same, but the backspacing is different.
I have a set of 16 x 6 ''Wagon Wheel'' rims [other names were White Spoke, Pie Cuts] I bought for my '68 C/10 Stepside in 1999, when the tire shop told me my OEM rims of 17.5x5.25 were shot after about 300,000 miles. I was running R17.5x8LTs. [Also now unobtainable.]
[Yes, Seventeen-Five (17.5''). Not a typo.]
The backspacing is about 4.'' The right rear was impacted in a collision. I took it into Discount Tires and they checked it out. The rubber tire is OK but there is a slight kink in the rim. It would vibrate at speed, they said. I'm taking that rim to an expert tomorrow, to see if he can true it. A search of local wheel shops and online querries found that 16x6 rims are now obsolete. I can't get a new replacement rim to match the other 3. Hoping the guy can straighten it out, otherwise I'll need to get new rims And maybe tires. Or settle for a different ride height.

A friend gave me a set of aluminum rims [take-offs from his '99 4x4 Suburban] and their backspacing is 5.'' I am hopeful they will fit on my '71 K/1500 GMC Jimmy and replace the 33x12.5x15LTs on 15x10 rims. Great meats for off-road, but with gas prices at current levels, their lack of economy is killing me. 16X8 rims with 235/75/16 is the intended replacement.
I would not like to use wheel spacers to compensate for modern backspacing.

I also have a couple of extra rims from a Nissan. That backspacing is really deep. Maybe 6''. I tried mounting a spare 235/85/R16 on the Stepside from a Toyota [I think] rim -- the inboard clearance is only about 1 finger.

The bolt patterns and also hub clearance [for FWD Warn hubs] are OK, but the backspacing is the killer.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.

Last edited by '68OrangeSunshine; 05-30-2022 at 08:13 PM.
'68OrangeSunshine is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com