Interior parts interchange - Single Cab

[Nick_R_23]

So this isn’t technically an interior swap thread. I have a 95+ regular cab that has been stripped bare on the inside. No interior whatsoever. I’m sticking with the 95+ interior, but I want to go with a red interior, which I will likely be pulling out of a Tahoe or Suburban. Obviously, these donors will get me everything I need seat and door panel forward. My concern is over the rear trim pieces, the B-pillar/seat belt trim, and rear cab parts. I can find these pieces easily enough in red for a regular cab in 88-94 trim, in fact, the local yard has 3 sets.

My two questions are:

1. On regular cabs, is the B-pillar/behind seat trim the same between 88-94 and 95-up?

2. If these pieces are physically the same, did the color of red change at all between the years on these rear plastic pieces?

[Palf70Step]

Cabs are the same back there far as I have been able to find. I know the red for the seat colors are different between the pre and post 95 models, so I assume panels are different also. I have used panels between the years, but just assume they are different colors because of the seat. The slight difference could have been sun wear.

[95 S_Trucker]

The only difference would be if the it has adjustable seatbelts. They started somewhere in 95/96. If your cab has adjustable belts, look for trim that accommodates.

Crew cab C pillar trim would work too. All of those(92-00) had stationary seat belts though.

[Nick_R_23]

Thanks guys, looks like I’ll hold out for the correct 95+ parts. I put up an ad and specifically stated “GOOD CONDITION”, and it’s amazing what some people think passes for good condition.