What’s missing here? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 11-25-2021, 03:17 PM

I was looking for something to dump in my electrolysis bucket and remembered I had this extra set of bucket seat sliders. After looking at them I decided these are very nice and have no need to be electrified (ha). I did decide to see how they worked. They slide fine but the release arm was sticky, PB Blaster fixed that. Looking at the passenger side though I seem to be missing the track locking pieces. Can someone tell me what I should have in there? I feel like I saw that someone was selling these but maybe only drivers side? Any help is appreciated.

roboticjunky · 11-25-2021, 05:51 PM

Is this what you're looking for?

https://www.classicparts.com/1967-72...info/28%2D960/

CG · 11-25-2021, 06:24 PM

Hmm, so I guess those are the same parts right side and left side. I was thinking maybe they did the right side a little differently. Probably connected with a wire between the two. I might have all of this stuff in a box somewhere.

Thanks for the link

roboticjunky · 11-25-2021, 06:39 PM

Here's the left side for reference.

https://www.classicparts.com/1967-72...info/28%2D961/

CG · 11-25-2021, 06:41 PM

Oh OK great ... now I see it, thanks!

Accelo · 11-26-2021, 02:12 AM

Here are some pictures.
There are two springs and the crossbar.

CG · 11-26-2021, 06:57 PM

So now I see Im missing the two large springs, the connecting rod, and the latch/hold mechanism for the right side. It just keeps adding up lol.

Thanks again for the help guys.

**special-K** · 11-27-2021, 12:00 PM

Great reference pictures!

CG · 11-27-2021, 01:06 PM

For sure! I learned a bunch about buckets here. Ive sprayed mine down liberally with PB Blaster and now Im going to toss them back in a box (I dont even have a bucket to sit on them haha.). I might run across the bits and pieces Im missing someday?

11-25-2021, 03:17 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	What’s missing here? I was looking for something to dump in my electrolysis bucket and remembered I had this extra set of bucket seat sliders. After looking at them I decided these are very nice and have no need to be electrified (ha). I did decide to see how they worked. They slide fine but the release arm was sticky, PB Blaster fixed that. Looking at the passenger side though I seem to be missing the track locking pieces. Can someone tell me what I should have in there? I feel like I saw that someone was selling these but maybe only drivers side? Any help is appreciated. Attached Images __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

11-25-2021, 05:51 PM	#2
roboticjunky Registered User Join Date: Oct 2015 Location: IN Posts: 208	Re: What’s missing here? Is this what you're looking for? https://www.classicparts.com/1967-72...info/28%2D960/

11-25-2021, 06:24 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: What’s missing here? Hmm, so I guess those are the same parts right side and left side. I was thinking maybe they did the right side a little differently. Probably connected with a wire between the two. I might have all of this stuff in a box somewhere. Thanks for the link __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

11-25-2021, 06:39 PM	#4
roboticjunky Registered User Join Date: Oct 2015 Location: IN Posts: 208	Re: What’s missing here? Here's the left side for reference. https://www.classicparts.com/1967-72...info/28%2D961/

11-25-2021, 06:41 PM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: What’s missing here? Oh OK great ... now I see it, thanks! __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

11-26-2021, 02:12 AM	#6
Accelo Registered User Join Date: Mar 2015 Location: washington Posts: 2,157	Re: What’s missing here? Here are some pictures. There are two springs and the crossbar. Attached Images

11-26-2021, 06:57 PM	#7
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: What’s missing here? So now I see Im missing the two large springs, the connecting rod, and the latch/hold mechanism for the right side. It just keeps adding up lol. Thanks again for the help guys. __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

11-27-2021, 12:00 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: What’s missing here? Great reference pictures! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-27-2021, 01:06 PM	#9
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,769	Re: What’s missing here? For sure! I learned a bunch about buckets here. Ive sprayed mine down liberally with PB Blaster and now Im going to toss them back in a box (I dont even have a bucket to sit on them haha.). I might run across the bits and pieces Im missing someday? __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291 Last edited by CG; 11-27-2021 at 02:31 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.