CA Prototype Dummy Filler Neck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 09-27-2022, 03:41 AM

I built this blank filler neck for my truck last December when I installed a Boyd under-bed tank and needed something to fill the hole left behind in the cab when I removed the original tank. This lead to the current design that I've been selling (link in my signature below). I decided to put one of the new ones on my truck, so this one is available. It looks good installed, and it is secure. It was labor intensive to make though compared to the latest design.

$60 shipped

**dagnabbitt** · 09-27-2022, 10:27 AM

I can't remember if you send to Canada or not, but if you do: I'll take it and pay the extra for shipping.

**pjmoreland** · 09-27-2022, 11:51 AM

No problem at all. Let me look up how much more the shipping will be

**hevy_chevy67** · 09-27-2022, 12:37 PM

Second in line if it somehow falls to me.

**dagnabbitt** · 09-27-2022, 12:39 PM

I've PM'd you my address to calculate shipping, thanks!

**pjmoreland** · 09-27-2022, 02:14 PM

Quote:

Originally Posted by dagnabbitt

I've PM'd you my address to calculate shipping, thanks!

Shipping cost sent.

**dagnabbitt** · 09-27-2022, 10:11 PM

Payment sent.

**pjmoreland** · 09-27-2022, 10:14 PM

Payment received. Thanks!

**pjmoreland** · 09-28-2022, 12:42 PM

Shipped to dagnabbitt

**dagnabbitt** · 10-09-2022, 01:58 PM

Received, thank you. Pretty slick for a prototype!

**pjmoreland** · 10-09-2022, 01:59 PM

Yeah, that's why it took me almost a year to replace it with my current design. It worked just fine.

09-27-2022, 03:41 AM	#1
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,318	Prototype Dummy Filler Neck I built this blank filler neck for my truck last December when I installed a Boyd under-bed tank and needed something to fill the hole left behind in the cab when I removed the original tank. This lead to the current design that I've been selling (link in my signature below). I decided to put one of the new ones on my truck, so this one is available. It looks good installed, and it is secure. It was labor intensive to make though compared to the latest design. $60 shipped Attached Images Last edited by pjmoreland; 09-27-2022 at 03:46 AM.

09-27-2022, 10:27 AM	#2
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,303	Re: Prototype Dummy Filler Neck I can't remember if you send to Canada or not, but if you do: I'll take it and pay the extra for shipping. __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

09-27-2022, 11:51 AM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,318	Re: Prototype Dummy Filler Neck No problem at all. Let me look up how much more the shipping will be

09-27-2022, 12:37 PM	#4
hevy_chevy67 Registered User Join Date: May 2005 Location: Blackfalds, Alberta Posts: 577	Re: Prototype Dummy Filler Neck Second in line if it somehow falls to me. __________________ 1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e

09-27-2022, 12:39 PM	#5
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,303	Re: Prototype Dummy Filler Neck I've PM'd you my address to calculate shipping, thanks! __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

09-27-2022, 10:11 PM	#7
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,303	Re: Prototype Dummy Filler Neck Payment sent. __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

09-27-2022, 10:14 PM	#8
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,318	Re: Prototype Dummy Filler Neck Payment received. Thanks!

09-28-2022, 12:42 PM	#9
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,318	Re: Prototype Dummy Filler Neck Shipped to dagnabbitt

10-09-2022, 01:58 PM	#10
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,303	Re: Prototype Dummy Filler Neck Received, thank you. Pretty slick for a prototype! __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

10-09-2022, 01:59 PM	#11
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,318	Re: Prototype Dummy Filler Neck Yeah, that's why it took me almost a year to replace it with my current design. It worked just fine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.