|
|
|
03-27-2002, 12:38 AM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: dillsburg pa
Posts: 115
|
slotted wheels
my uncle has a set of aluminum slotted wheels off of a jeep that look just like the ones in pictures i see of trucks on here. my ? is are they interchangab? my uncle seems to think they are.
------------------ 67 c-20 w/327 and a 3speed and 4.56 rear(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc)
__________________
67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires. just put out 135 hp to the wheels on the dyno. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc). it is next in line for a rebuild |
|
|
|
03-27-2002, 12:40 AM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Yup, they sure are.
 Apearantly, Toyota 6 lug will fit too. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one!  Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio |
|
|
|
|
03-27-2002, 12:55 AM
|
#3 |
|
Registered User
Join Date: Feb 2002
Location: dillsburg pa
Posts: 115
|
i have heard of the toyota wheels working before. thanks i thought they looked like they would fit fine.
------------------ 67 c-20 w/327 and a 3speed and 4.56 rear(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc)
__________________
67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires. just put out 135 hp to the wheels on the dyno. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc). it is next in line for a rebuild |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
