Survey- For those of you laying frame, how tall are your front tires

[67cheby]

Trying to get a little marketing help here , if you are laying frame could you tell me if you are running a tire under 28 inches tall or if over 28 inches tall (how tall ?), trying to figure out if i should put out my first run of inner fenders like they are they will cover a 28 inch tall tire , laying frame or if i should modify them now and make them cover something taller.....PLEASE IF EVERYONE WOULD LET ME KNOW WHAT THEY ARE RUNNING I WOULD SURE APPRECIATE IT , THANKS MIKE

[belowme51]

29" tire would be great for us that are running 22"s up front

[N2TRUX]

You should create a poll-
under 28 inches tall
over 28 inches tall

[Jparks]

mine are 29.3(265/35/22)

[67cheby]

what size are your 22's ?? are they exactly 29 tall??

[67cheby]

Originally Posted by N2TRUX

You should create a poll-
under 28 inches tall
over 28 inches tall

that is a great idea but how do i do a poll ??

[N2TRUX]

You can add one when you post. I "think" you can add one later, but not sure. I took care of it for you.

[belowme51]

especially my set..lol Ill have the PB body drop on it so that another .75 of an inch. pretty much would be a dropmember and bolt on body drop friendly fender. Dont forget to send me a set so I can make sure they work

[67cheby]

right now they clear a 28 , here is what i am looking at doing, trying to stretch the top to 29 1/2 inches of coverage, BUT....this is going to take alot of work, so if there is more people running 28 and under than running over ....

[67cheby]

Originally Posted by n2trux

you can add one when you post. I "think" you can add one later, but not sure. I took care of it for you.

thanks a bunch !!

[N2TRUX]

My pleasure.

[Jparks]

I think you'll find guys running 22's aren't going to have tires under 28", my 35 series are 29.3, a 30 series would be around 28.3, so if you are running 22's you would need a 25 series tire to clear your fenders and lay frame

[belowme51]

245/30/22 is just under 28" tall. its a pretty small tire but will work with the 28" fender

[belowme51]

run that with a 285/25/22 rear tire .They are within 1/10th of an inch (27.7 front) and (27.8 rear) so you can still have complete staggered set fr and rr.

[67cheby]

dang....right now its 50/50 ....this isnt helping my decision...LOL, i am trying to convince myself not to modify but................................................

[N2TRUX]

I would send Nate Porter a email or PM and get his input. He can tell you how many are running what size.

[belowme51]

I initially voted for the bigger fender but I look at it this way, if you want a clean looking fender than the 28" is the way to go that way its level with the fender and not sticking up. The fender may not be for everyone and its your dime thats making it, if making a 29" tall fender is in the budget than by all means the more trucks you can apply this too the more $$ you will make back but IMO the 28" fender is the way to go and the buyer can make the needed adjustments if they want to go outside of the intended purpose of the fender, like in my case I will just buy a smaller tire. just my 2 cents.

[67cheby]

that is exactly what my body guy said !!! thanks its good to hear it coming from someone else ...almost word for word !!

[67cheby]

Originally Posted by N2TRUX

I would send Nate Porter a email or PM and get his input. He can tell you how many are running what size.

good idea !! i will do, maybe he will see this post also !!

[SCOTI]

28" would be the minimum so it's better to make them for 29~29.5" (and I'm not even planning to 'lay frame'). Anything smaller on a 20" or larger wheel is a short sidewall & possible rim damage.

[67cheby]

ttt....more votes please

[gringoloco]

I say do both

If you're gonna stretch 'em, make sure they get a nice contour to match the inside as well. Form is just as important as function in this application...

[jmedero]

I'm running 27.5.
Posted via Mobile Device

[nastyc10]

mine are just under 28"

[67cheby]

ttt