67 Plain Jane C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ghalperin · 07-08-2016, 01:53 PM

I just picked up this very plain '67 C10, in Scottsdale, AZ. One owner. 57,000 miles. It runs and drives very nice. 2 Build sheets in the seat. It even had a Heater Delete, although a dealer installed one. Built on 9/15/1966 in Fremont, CA and delivered to Fletcher Jones Chevrolet in Phoenix, AZ

I'm looking for: 4 stock hub cabs, fawn vinyl seat cover and stock drivers door mirror.

Thanks for any help on any leads.

Glenn Halperin
Costa Mesa, CA

TwoFiftyShifter · 07-08-2016, 02:14 PM

It's got carpet, it's fancy.

Love that SPID!

ghalperin · 07-08-2016, 03:14 PM

Yea, along with the cowboy seat cover, it had a carpet kit sitting on the stock rubber floor mat. I already took it apart looking for treasure. The only treasures found were the build sheets, the heater delete panel for the dash and a rolled up towel full of tools.

I also laid down the spare tire. The mirrors are next to go and maybe the rear bumper if I can find a used painted stock one.

**Classic v6 GMC's** · 07-08-2016, 03:24 PM

Nice Score!! That has got to be the lowest option SPID.

ghalperin · 07-08-2016, 03:35 PM

It's funny that the only option on the SPID is a delete.

**michael bustamante** · 07-08-2016, 06:33 PM

man id drive it just like that!!

ghalperin · 07-08-2016, 07:24 PM

First bath in years.

**68bowtie** · 07-08-2016, 10:08 PM

i LOVE this truck. keep the pictures coming! that is definitely the blankest spid i've ever seen (and i've seen a lot). and the only option is a delete. crazy.

ghalperin · 07-09-2016, 08:03 PM

I cleaned under the hood.

**68bowtie** · 07-09-2016, 11:23 PM

very nice. what are your plans for it? that would be a great one to just clean up and put back the factory correct parts like hub caps, mirrors, amd some white stripe tires.

ghalperin · 07-10-2016, 12:40 AM

That is pretty much the plan.

I have already found a factory light yellow mirror arm for the driver's door. I'm searching for the stock hub caps and a painted rear bumper.

The tires are like new, or else I would have already had white walls installed. It runs really well, but is geared a little low. I may go to a taller rear tire. If I do, I'll give it a slight rubber rake, with thin white walls.

I'm trying to find the right seat cover, but nobody makes a '67 replacement cover in Fawn. I found somebody that'll make it with the correct factory embossed vinyl, but for $650. I'm on the fence on spending that much. My friends are telling me to do the Mexican blanket thing, so for now I have two black Harbor Freight shipping blankets.

I'm going to the Long Beach Hi-Performance Swap Meet tomorrow, maybe I'll find some stuff there.

68panelman · 07-10-2016, 08:39 AM

Very nice truck!, Just the way I like em!

ghalperin · 07-10-2016, 06:54 PM

I spent $135 today at the LB swap meet. 2 mirror arms $20. Spare tire holder and battery tray $5 for both. 215/70R15 and 235/75R15 used white walls mounted and balanced $110.

I only mounted the driver's side mirror. The tires and mirror make a huge improvement.

**68bowtie** · 07-10-2016, 07:20 PM

wow killer deals and i agree looks great! there are a few sets of painted 67 caps on ebay right now, but they are all pretty pricey... the $275 set would be a great buy...

ghalperin · 07-10-2016, 09:12 PM

I'm watching that set in the bay. I'll pull the trigger in 3 days and 17 hours...

**72ironmike** · 07-11-2016, 11:09 AM

Very nice truck. I just purchased it's cousin. I like the yellow color on your truck.

sawyerrm · 07-11-2016, 03:05 PM

Quote:

Originally Posted by 72ironmike

Very nice truck. I just purchased it's cousin. I like the yellow color on your truck.

Is that the stock height?

ghalperin · 07-11-2016, 04:05 PM

This morning I scored a very nice original fawn 67 GMC seat.

Name: IMG_8871 (Small).JPG
Views: 536
Size: 64.7 KB

68panelman · 07-11-2016, 04:10 PM

NICE !, You're really on the hunt!, An boy it's paying off! Great scores, all of them.

67swb72klb · 07-11-2016, 07:39 PM

Love that truck! And all the options.

86swb · 07-12-2016, 08:06 PM

Quote:

Originally Posted by ghalperin

I cleaned under the hood.

Looks like it has everything for heat under the hood. Looks like you picked up a really nice truck. Keep it OE>

But guess you will not need heat there.

Cape Codder · 07-12-2016, 09:39 PM

He stated it had a dealer installed heater. The factory delete would still be on the spid

86swb · 07-13-2016, 08:24 PM

My bad. Did not see that. Most likely he will not need it in California.

ghalperin · 07-13-2016, 09:24 PM

I bought it in Scottsdale. It was always an Arizona truck. I'm not sure when the dealer installed the heater, but it was decades ago. Personally I think having a defroster is more valuable.

tommys72 · 07-14-2016, 09:17 PM

I love that truck!

07-08-2016, 01:53 PM	#1
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	67 Plain Jane C10 I just picked up this very plain '67 C10, in Scottsdale, AZ. One owner. 57,000 miles. It runs and drives very nice. 2 Build sheets in the seat. It even had a Heater Delete, although a dealer installed one. Built on 9/15/1966 in Fremont, CA and delivered to Fletcher Jones Chevrolet in Phoenix, AZ I'm looking for: 4 stock hub cabs, fawn vinyl seat cover and stock drivers door mirror. Thanks for any help on any leads. Glenn Halperin Costa Mesa, CA

07-08-2016, 02:14 PM	#2
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 67 Plain Jane C10 It's got carpet, it's fancy. Love that SPID! __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

07-08-2016, 03:14 PM	#3
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 Yea, along with the cowboy seat cover, it had a carpet kit sitting on the stock rubber floor mat. I already took it apart looking for treasure. The only treasures found were the build sheets, the heater delete panel for the dash and a rolled up towel full of tools. I also laid down the spare tire. The mirrors are next to go and maybe the rear bumper if I can find a used painted stock one.

07-08-2016, 03:24 PM	#4
Classic v6 GMC's Senior Member Join Date: Mar 2015 Location: Arizona from Overland Park Kansas Posts: 3,968	Re: 67 Plain Jane C10 Nice Score!! That has got to be the lowest option SPID. __________________ Current projects: 1966 Chevy Custom PS PB A/C BBW 283 v8 3 speed OD 1966 GMC Long Step 1966 GMC 3/4 ton Custom PS PB Sport trim 351 v6 1966 GMC 3/4 ton 4x4 Custom PB 305 v6 np435 1960 GMC Custom 1968 GMC 3/4 ton 4x4 Short Bed 1962 K20 Tow truck 1961 GMC Extended Suburban Panel and a few more

07-08-2016, 03:35 PM	#5
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 It's funny that the only option on the SPID is a delete.

07-08-2016, 06:33 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: 67 Plain Jane C10 man id drive it just like that!! __________________ 1967custom

07-08-2016, 07:24 PM	#7
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 First bath in years.

07-08-2016, 10:08 PM	#8
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,343	Re: 67 Plain Jane C10 i LOVE this truck. keep the pictures coming! that is definitely the blankest spid i've ever seen (and i've seen a lot). and the only option is a delete. crazy. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

07-09-2016, 08:03 PM	#9
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 I cleaned under the hood.

07-09-2016, 11:23 PM	#10
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,343	Re: 67 Plain Jane C10 very nice. what are your plans for it? that would be a great one to just clean up and put back the factory correct parts like hub caps, mirrors, amd some white stripe tires. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

07-10-2016, 12:40 AM	#11
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 That is pretty much the plan. I have already found a factory light yellow mirror arm for the driver's door. I'm searching for the stock hub caps and a painted rear bumper. The tires are like new, or else I would have already had white walls installed. It runs really well, but is geared a little low. I may go to a taller rear tire. If I do, I'll give it a slight rubber rake, with thin white walls. I'm trying to find the right seat cover, but nobody makes a '67 replacement cover in Fawn. I found somebody that'll make it with the correct factory embossed vinyl, but for $650. I'm on the fence on spending that much. My friends are telling me to do the Mexican blanket thing, so for now I have two black Harbor Freight shipping blankets. I'm going to the Long Beach Hi-Performance Swap Meet tomorrow, maybe I'll find some stuff there.

07-10-2016, 08:39 AM	#12
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,450	Re: 67 Plain Jane C10 Very nice truck!, Just the way I like em!

07-10-2016, 06:54 PM	#13
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 I spent $135 today at the LB swap meet. 2 mirror arms $20. Spare tire holder and battery tray $5 for both. 215/70R15 and 235/75R15 used white walls mounted and balanced $110. I only mounted the driver's side mirror. The tires and mirror make a huge improvement.

07-10-2016, 07:20 PM	#14
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,343	Re: 67 Plain Jane C10 wow killer deals and i agree looks great! there are a few sets of painted 67 caps on ebay right now, but they are all pretty pricey... the $275 set would be a great buy... __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

07-10-2016, 09:12 PM	#15
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 I'm watching that set in the bay. I'll pull the trigger in 3 days and 17 hours...



Register or Log In To remove these advertisements.

07-11-2016, 11:09 AM	#16
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: 67 Plain Jane C10 Very nice truck. I just purchased it's cousin. I like the yellow color on your truck. Attached Images

07-11-2016, 04:05 PM	#18
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 This morning I scored a very nice original fawn 67 GMC seat.

07-11-2016, 04:10 PM	#19
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,450	Re: 67 Plain Jane C10 NICE !, You're really on the hunt!, An boy it's paying off! Great scores, all of them.

07-11-2016, 07:39 PM	#20
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,449	Re: 67 Plain Jane C10 Love that truck! And all the options. __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

07-12-2016, 09:39 PM	#22
Cape Codder Registered User Join Date: May 2013 Location: Centerville,Ma. Posts: 1,223	Re: 67 Plain Jane C10 He stated it had a dealer installed heater. The factory delete would still be on the spid

07-13-2016, 08:24 PM	#23
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: 67 Plain Jane C10 My bad. Did not see that. Most likely he will not need it in California. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

07-13-2016, 09:24 PM	#24
ghalperin Registered User Join Date: Jul 2016 Location: Newport Heights, CA Posts: 1,000	Re: 67 Plain Jane C10 I bought it in Scottsdale. It was always an Arizona truck. I'm not sure when the dealer installed the heater, but it was decades ago. Personally I think having a defroster is more valuable.

07-14-2016, 09:17 PM	#25
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: 67 Plain Jane C10 I love that truck! __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son Last edited by tommys72; 07-24-2016 at 10:05 PM.

Register or Log In To remove these advertisements.