The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-19-2018, 02:56 PM   #1
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
1972 Chevy Crew Cab Cheyenne Super

Gonna start this new build thred by saying thanks for allowing me to become a member of such an awesome 67-72 family. As a new member I’m amazed at how helpful fellow members are and the level of respect shown from everyone is so cool. I been dreaming this new build up for over a year and I’ve seen numerous crew cab builds on here. Read them over and over again as I think the concept is so cool so I decided to build one myself.. The goal is to build my crew cab to look like somebody when into the Chevy dealer in 1972 and ordered the “Denali” of the day. Want to retain a full factory looking 3/4 ton 4x4 crew cab shortbed loaded with as many factory options as I can. Will have a small amount of lift and tires no bigger than 33s. First step for me was finding a suburban locally that wasn’t too far gone. In Pennsylvania where I’m at they are few and far between let alone a decent one... in January of 2018 I purchased my starting point... 1972 GMC suburban that was bought new in coatsville by a plumber. He ran his plumbing business out of it for 25 years before selling to the guy I bought from.. Nothing fancy here 350, three speed. The original protector plate was still in the glove box. The PO swapped in a 350 turbo trans and daily drove it for 10+ years. He said the water pump went out so he parked it but forgot how long.... that’s the spot where I bought it from... As far as rust goes your typical rockers, front mounts, floor section above front supports. But I was amazed at how solid the roof is above the windshield. The barn doors are straight and rust free so I will be selling them at a later date... The doors were also suprisingly solid.... Build progress will be kinda slow but hoping to hit it hard this winter....
Posted via Mobile Device
Attached Images
     

Last edited by ShortbedClayton; 09-19-2018 at 09:39 PM.
ShortbedClayton is offline   Reply With Quote
Old 09-19-2018, 03:54 PM   #2
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,926
Re: 1972 Chevy Crew Cab “Denali”

Welcome. Looks like a great start. These crew cab builds amaze me in the amount of metal work required.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-19-2018, 04:09 PM   #3
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,625
Re: 1972 Chevy Crew Cab “Denali”

I am subbed for this build.
Hope to start my CC build soon.
Will it be a 3 door or 4 door?
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 09-19-2018, 05:53 PM   #4
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by 1971Stepside View Post
Welcome. Looks like a great start. These crew cab builds amaze me in the amount of metal work required.
Yes sir. Gonna be a learning process for sure.. but worth it in the end
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 09-19-2018, 05:54 PM   #5
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by Getter-Done View Post
I am subbed for this build.
Hope to start my CC build soon.
Will it be a 3 door or 4 door?
Thanks. Defiantly a four door! I feel if you go thru the work to putting a cab back on why not put a fourth door.
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 09-19-2018, 09:14 PM   #6
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Smile Re: 1972 Chevy Crew Cab “Denali”

Haven’t really started any major modifications quite yet. After a quick water pump fix the burb was running and driving under its own power. Immediately park it in the shop to begin tearing it down. Removed both passenger side doors and starting removing all the rust. Installed new front support and a floor section. Bottom of the A piller was kinda bad shape so replaced a piece of that. After fourtty some years of life on the road you wouldn’t believe how much debris gets packed down inside the cowl Pannel. Spent a few hours cleaning that out. Moved to the B piller and started working some new metal in there. Made sure to throw a brace in there as I didn’t wanna loose any shape... that’s about all the farther I’ve went to this point. But I figured it would be in my advantage to fix most of the rot and rust before starting to really form the crew cab. In the mean time I’ve slowly been collecting parts for this build. When I’m done with this project I want to get as many factory options so that’s what I been searching for the last few months. My doner truck for the rear cab section is an old abandoned project of mine but long story short it’s a 1970 C10 CST. Loaded up with a few good options... but the windshield area was too far gone so she will serve great purpose in the crew cab... Don’t wanna drag this out to long but what I’ve got so far for parts is a solid drivers door for the fourth door, factory tach dash with wiring harness, the AC parts will be from the doner truck and a few weeks ago I scored my personal favorite 1972 “extreme” bend tow hooks!!
Attached Images
     
ShortbedClayton is offline   Reply With Quote
Old 09-19-2018, 09:22 PM   #7
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Re: 1972 Chevy Crew Cab “Denali”

More photos of parts for the build and the spid sheet of the doner truck. Can tell a little back story on that if anybody really want me too. Bought a 1972 k20 frame out of the local junkyard. Got a cab light roof section for the top skin...
Attached Images
    
ShortbedClayton is offline   Reply With Quote
Old 09-19-2018, 10:57 PM   #8
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,625
Re: 1972 Chevy Crew Cab “Denali”

Wow
You have the parts.
Now it is just / How the Puzzle will go together.
I like that 4wd cab truck.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 09-25-2018, 07:49 PM   #9
jimer1964
Senior Member
 
jimer1964's Avatar
 
Join Date: Jan 2007
Location: bowmansville,pa
Posts: 1,676
Re: 1972 Chevy Crew Cab “Denali”

Clayton you better put those hooks in the safe! Looks like a nice project. Sweet nova!
jimer1964 is offline   Reply With Quote
Old 09-25-2018, 07:52 PM   #10
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by jimer1964 View Post
Clayton you better put those hooks in the safe! Looks like a nice project. Sweet nova!
Bought a whole truck just for them. Hooks are gold
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 09-26-2018, 07:14 PM   #11
71blksuper4x4
SWB 4x4 Collector
 
71blksuper4x4's Avatar
 
Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,148
Re: 1972 Chevy Crew Cab “Denali”

Good luck on your build, they take awhile. I like the idea of a GMC Denali version.
__________________
TREVOR
1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks)
1972 Jimmy (soon to be Hickey cloned)
1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track)
1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank
1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT)
http://67-72chevytrucks.com/vboard/s...d.php?t=624819
1989 V3500 Crew Cab (454tbi, NV4500, np205)
1970 Chevelle SS (LS5 454,th400,8track,buckets,tach)
:2004 Jeep Wrangler Rubicon (daily driver)

WTB: 1968-70 Cruise Control Lever
71blksuper4x4 is offline   Reply With Quote
Old 09-26-2018, 08:25 PM   #12
notsolo
Registered User
 
notsolo's Avatar
 
Join Date: Apr 2008
Location: Md
Posts: 2,446
Re: 1972 Chevy Crew Cab “Denali”

6 Hooks ARRRRRR Better than 2....Looking forward to your project.
notsolo is offline   Reply With Quote
Old 09-29-2018, 10:32 PM   #13
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Re: 1972 Chevy Crew Cab “Denali”

Not much progress made lately. I did get my cab light roof skin harvested. Spent most of the weekend driving all over picking up parts for the build. Got a set of bucket seats, another tach dash with air guage, two center consoles, and am/fm radio and som other misc. parts... super stoked to finally have bucket seats!
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 09-29-2018, 10:35 PM   #14
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by ShortbedClayton View Post
Not much progress made lately. I did get my cab light roof skin harvested. Spent most of the weekend driving all over picking up parts for the build. Got a set of bucket seats, another tach dash with air guage, two center consoles, and am/fm radio and som other misc. parts... super stoked to finally have bucket seats!
Posted via Mobile Device
Posted via Mobile Device
Attached Images
     
ShortbedClayton is offline   Reply With Quote
Old 09-29-2018, 11:33 PM   #15
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,625
Re: 1972 Chevy Crew Cab “Denali”

Great parts harvest.
Real bucket seats.

I like the Hat cab lights the best.
That is going to look Good.
My truck currently has the Yankee 77 cab lights.
I will (use) those.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 11-03-2018, 09:11 PM   #16
feller
Registered User
 
feller's Avatar
 
Join Date: Feb 2011
Location: madison, IN.
Posts: 484
Re: 1972 Chevy Crew Cab “Denali”

I'm in to watch
feller is offline   Reply With Quote
Old 02-12-2019, 06:16 PM   #17
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Update on build progress since I haven’t in a few months. First and foremost it’s mid winter her in PA and I got in my usual winter blues but to brighten my mood I took advantage of some fresh snow to get some pics of my 1971 K10 shortbed.. I was thoroughly pleased and ended the day with big smiles. This was the first time this truck seen snow since I bought it 10 years ago at the age of 13. I’m sure the old lady I bought it off of would be quite impressed with the results but I think she has since passed...( honestly I was to young to pay attention as to where I was going when me and dad picked the truck up so I don’t know where her house even was) anyways figured I’d share my “snowshoot” with my fellow board family.... last pic is the day I brought it home I think August 2009
Posted via Mobile Device
Attached Images
     

Last edited by ShortbedClayton; 02-12-2019 at 06:23 PM.
ShortbedClayton is offline   Reply With Quote
Old 02-12-2019, 06:28 PM   #18
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
But back to crew cab. No much foreward progress. Got passenger side front rocker I n place. And decided it was time to cut... a sawzaw made quick work of the suburban and at this point there’s no going back.. but I was pleased because I could already picture a 4 door...
Posted via Mobile Device
Attached Images
    
ShortbedClayton is offline   Reply With Quote
Old 02-12-2019, 06:37 PM   #19
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Next is harvesting the parts of the donor truck. Lifted the cab off of that and started to strip the parts I need. Most of all the interior pieces from this truck will be going in the crew cab such as under dash wiring and all ac stuff. Hoping to use some blue interior pieces as well because I’ve now decided to do a factory medium blue and white cheyenne super.. I decided that stripping the cab would be easier with the cab back off so that section was removed. Next plan of attack is to completely strip the suburban interior so I have raw steel to begin constructing the crew cab..
Posted via Mobile Device
Attached Images
   
ShortbedClayton is offline   Reply With Quote
Old 02-16-2019, 08:49 AM   #20
landarts
landarts
 
Join Date: May 2005
Location: Star, Idaho
Posts: 1,312
Re: 1972 Chevy Crew Cab “Denali”

Love the crew cab project in for this one. Also love the 71 K10, what color is that?
__________________
71 K20 Idaho Edition
69 K10 from the Field
68 Second Chance
Fix and Sale 72 GMC 3/4 ton 4x4 K2500
The "Fixrupr" build thread

72 Cheyenne 1/2 ton " FIXRUPR " - daily driver
67 C20 all original paint
71 K20 Custom 4x4 (Idaho Edition)
72 K20 GMC Super Custom 4x4
72 K20 Custom Deluxe 4x4
69 K10 Custom package 4x4 (69 K10 from the field)
69 K10 Custom
72 K20 Custom Deluxe 4x4
72 K20 Crew Cab Project
71 GMC Jimmy CST
72 Blazer
70 Blazer
landarts is offline   Reply With Quote
Old 02-16-2019, 10:58 AM   #21
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by landarts View Post
Love the crew cab project in for this one. Also love the 71 K10, what color is that?
Thanks. It’s off a 2013 GMC Denali all terrain. I believe the name is red diamond tint coat.
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 02-21-2019, 09:32 PM   #22
cst204x4
Senior Member
 
Join Date: Jan 2012
Location: corunna michigan
Posts: 1,999
Re: 1972 Chevy Crew Cab “Denali”

Nice project, keeping the cruise of the cst for the crew?
__________________
1970 CST 4x4 collecting nos parts for this project
1972 cutlass owned since 1984
1972 cutlass conv
1970 Cutlass conv
1981 chevy shortbox
1986 grand national
2004 2500HD Crew Cab 66,000 miles
cst204x4 is offline   Reply With Quote
Old 02-22-2019, 09:59 AM   #23
ShortbedClayton
Senior Member
 
Join Date: Aug 2018
Location: Lancaster,PA
Posts: 673
Quote:
Originally Posted by cst204x4 View Post
Nice project, keeping the cruise of the cst for the crew?
Thanks. I’m undecided right now but I’m leaning towards 4 speed big block. I love shifting gears and the cruise is set up for auto small block.. hoping to go big block... all the cruise stuff is in a box in the attic... rare parts these days
Posted via Mobile Device
ShortbedClayton is offline   Reply With Quote
Old 07-10-2019, 10:47 PM   #24
goldenburb
Registered User
 
goldenburb's Avatar
 
Join Date: Jun 2010
Location: aurora colo
Posts: 210
Re: 1972 Chevy Crew Cab “Denali”

Love your built so much
I’m in the collecting part stage for my cc. Can you share the cutting measurements? Thanks
__________________
70 c10 2wd crashed Suburban
67 c10 2wd sb truck
67 c10 4wd lb truck
goldenburb is offline   Reply With Quote
Old 01-09-2020, 09:01 PM   #25
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,625
Re: 1972 Chevy Crew Cab “Denali”

Any Updates?













.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com