Not another build thread! Progress on my '67 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 06-28-2006, 11:06 PM

I'm not sure which mounts you're referring to?

If you mean the seat mounts, no, they are the stock seat mounts off a 93 silverado that came with the 93 bench seat, I just set them back farther so I didn't have to modify them for the "hump" in the floor that runs from door to door.

If you mean the cab mounts, no again, the frame mounts are stock and the actual cab mounts were a kit I got from GMC Pauls.

I think you were referring to one of the two?

Tink · 06-30-2006, 07:01 AM

I was referring the the cab mounts... meaning the bracket part... they look new in the pic... I need to replace mine on a different model truck so I was wondering if you had made them or bought them. If I could buy mounts it would certainly be easier then making them.

67ChevyRedneck · 07-10-2006, 09:17 PM

BACK TO WORK! I started another long friday off packing up the dogs and driving to Cola to work on the ole girl again. I made good use of my CCP hidden hinges for the 67. The instructions were a little vague but they did tell you what size drill bits you need. Of course, I don't have a big honkin 1/2 drive drill.... so I had fun wallering out the big holes with a 3/8" bit

You have to drill out the side of the tailgate first (keeping the top of the hole against the back edge of the tailgate (the inside edge). You then have to guestimate where to drill the hole for the mounting screw, and you could then figure out where to drill the two holes for the slider and cut out the section between the two. The final step is to shut the gate, snap the latches, punch a hole and drill (or waller) out a 1/2 hole in the bedside for the rubber grommet.

67ChevyRedneck · 07-10-2006, 09:21 PM

Look MA! No chains! With a fellow board memebers help, I hope to have a set of hidden hinges on next time as well.

67ChevyRedneck · 07-10-2006, 09:23 PM

Ok, here's where I win the f*tard of the year award, I wasn't happy with the front clip of the truck... sooooooo, I repainted it

67ChevyRedneck · 07-10-2006, 09:24 PM

I also sanded the bed back down a bit and put some "real" primer on it.

67ChevyRedneck · 07-10-2006, 09:25 PM

And I got up nice and early again and painted the bed and the front clip.

67ChevyRedneck · 07-10-2006, 09:27 PM

I will admit that I half, well you know what, the inside of the bed...big time. I plan on sanding the wood down a bit and staining it and the inner bedsides will be coated with a bedliner stuff. Just a driver, no show truck here

67ChevyRedneck · 07-10-2006, 09:31 PM

Bill didn't like the fact that my truck was only a day-ly driver so I cleaned up the headlight buckets, rings, and lights, and reinstalled them. I also hit the core support with some flat black to make it stand out better behind the grill (yes, I got so excited I was finally painting it last month that I forgot to tape the backside of the grill off)

67ChevyRedneck · 07-10-2006, 09:34 PM

Looks like I got to bust out some bling too! Just as a side note.... REPOP FENDERS DO NOT HAVE THE HOLES DRILLED OUT FOR THE HEADLIGHT TRIM RINGS. It's scary drilling fresh paint

67ChevyRedneck · 07-10-2006, 09:37 PM

Here's a few more shots of what's been done so far. Next time (probably a few weeks from now) I'll have the rear fenders, steps and tailgate in paint. I should also have all of the "bling" on the front end, including my super ultra cool (what a dork, huh?) fog light (excuse me, driving lights) front bumper. Whooo flippity hooooo. I might acutally be able to drive this sum beech in a couple months!

**Palf70Step** · 07-10-2006, 09:49 PM

Congrats, but boy you bettter slow down...you are getting to fer ahead of me.

Work and progress looks great on the truck. Looking forward to seeing the final assembly and tire melting.

67ChevyRedneck · 07-11-2006, 10:55 AM

I promised the girlfriend I'd leave the "other woman" alone for a few weeks and spend the next couple weekends with her before she goes back to UGA to her junior year in graduate vet school (she's gonna be like 25 when she finally graduates but she'll be making lots of money so I can buy more projects

) SO you've got about 3 weeks to catch up

I'm gonna be pushin for early september.... now where am I gonna get another $1,800 to finish???

**Palf70Step** · 07-11-2006, 01:03 PM

I think you might still beat me even with that delay. It is looking nuce though.

jimmydean · 07-12-2006, 10:00 AM

That's looking great! You've gotten a lot farther than I have on mine in the near year I've had it. I told myself when I started the new job in January that I would make progress since I wouldn't be driving and I still drive it too much.

Man, this board sure is motivation to do stuff though!

glock35ipsc · 07-12-2006, 10:33 AM

Looking great! I really like that color!

ThatOneBlue67 · 07-14-2006, 04:51 PM

I like the color as well! It looks very familiar... I'm looking forward to attempting a gas tank relocation of my own.

*MisterMan* · 07-14-2006, 05:52 PM

waxing in sun!!??... oh... riskey!!... looks awesome man!

--den

"67"StepSide · 07-15-2006, 10:01 PM

Nice job!!!!!! Love to see progress!!!

67ChevyRedneck · 07-16-2006, 04:08 PM

The color is a 1999 (and I'm sure it applied to many other years as well, I just so happened to see it under 1999 in the paint book) GM medium blue metallic. It looks dark in some of the pics, but in person the color is actually pretty light and somewhat close to the original interior color of the truck (the truck was originally blue interior with white exterior). I love progress too!

HotRod71 · 07-16-2006, 04:44 PM

I was gonna say it looked like Med. Quasar Blue Metallic that was on my 91 Vette. Looks great

67ChevyRedneck · 07-16-2006, 04:48 PM

Quote:

Originally Posted by ThatOneBlue67

I like the color as well! It looks very familiar... I'm looking forward to attempting a gas tank relocation of my own.

I actually didn't think it was hard at all. The only difficult part is how and where your going to get fuel IN the tank.

67ChevyRedneck · 07-17-2006, 08:19 AM

I worked real hard this weekend on the truck.... I somehow managed to paint my repop bowtie the same color as the truck and put some clear on it. Well, at least as close as Wal-Mart's med. blue metallic spray can paint is

I also painted the two grill pieces white, haven't cleared them yet, and I started to clean up all of the brackets and taillights for the bed.

krue · 07-17-2006, 11:48 AM

I just read this thread from start to finish (took about 1/2 hour for all the pics to load w/stupid dialup connection) and just want to say you should be proud of the job you've done on your truck! It looks great.

Scrubby · 07-17-2006, 12:16 PM

Very awesome job! This thread is inspiring! I need to get off my butt and get working on my blazer!

----
Pete

'72 K5 Blazer
'87 V10 Suburban
Pictures of my trucks!
GMTrucks.org - Absolutely Free Forums, Classifieds, FAQ, Image Hosting, and More!

06-28-2006, 11:06 PM	#76
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I'm not sure which mounts you're referring to? If you mean the seat mounts, no, they are the stock seat mounts off a 93 silverado that came with the 93 bench seat, I just set them back farther so I didn't have to modify them for the "hump" in the floor that runs from door to door. If you mean the cab mounts, no again, the frame mounts are stock and the actual cab mounts were a kit I got from GMC Pauls. I think you were referring to one of the two? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

06-30-2006, 07:01 AM	#77
Tink Registered User Join Date: May 2002 Location: VA Posts: 1,337	Re: Not another build thread! Progress on my '67 I was referring the the cab mounts... meaning the bracket part... they look new in the pic... I need to replace mine on a different model truck so I was wondering if you had made them or bought them. If I could buy mounts it would certainly be easier then making them. __________________ 69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list! Last edited by Tink; 06-30-2006 at 09:35 AM.

07-10-2006, 09:17 PM	#78
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 BACK TO WORK! I started another long friday off packing up the dogs and driving to Cola to work on the ole girl again. I made good use of my CCP hidden hinges for the 67. The instructions were a little vague but they did tell you what size drill bits you need. Of course, I don't have a big honkin 1/2 drive drill.... so I had fun wallering out the big holes with a 3/8" bit You have to drill out the side of the tailgate first (keeping the top of the hole against the back edge of the tailgate (the inside edge). You then have to guestimate where to drill the hole for the mounting screw, and you could then figure out where to drill the two holes for the slider and cut out the section between the two. The final step is to shut the gate, snap the latches, punch a hole and drill (or waller) out a 1/2 hole in the bedside for the rubber grommet. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:21 PM	#79
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Look MA! No chains! With a fellow board memebers help, I hope to have a set of hidden hinges on next time as well. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:23 PM	#80
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Ok, here's where I win the f*tard of the year award, I wasn't happy with the front clip of the truck... sooooooo, I repainted it Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:24 PM	#81
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I also sanded the bed back down a bit and put some "real" primer on it. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:25 PM	#82
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 And I got up nice and early again and painted the bed and the front clip. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:27 PM	#83
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I will admit that I half, well you know what, the inside of the bed...big time. I plan on sanding the wood down a bit and staining it and the inner bedsides will be coated with a bedliner stuff. Just a driver, no show truck here Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:31 PM	#84
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Bill didn't like the fact that my truck was only a day-ly driver so I cleaned up the headlight buckets, rings, and lights, and reinstalled them. I also hit the core support with some flat black to make it stand out better behind the grill (yes, I got so excited I was finally painting it last month that I forgot to tape the backside of the grill off) Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:34 PM	#85
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Looks like I got to bust out some bling too! Just as a side note.... REPOP FENDERS DO NOT HAVE THE HOLES DRILLED OUT FOR THE HEADLIGHT TRIM RINGS. It's scary drilling fresh paint Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:37 PM	#86
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Here's a few more shots of what's been done so far. Next time (probably a few weeks from now) I'll have the rear fenders, steps and tailgate in paint. I should also have all of the "bling" on the front end, including my super ultra cool (what a dork, huh?) fog light (excuse me, driving lights) front bumper. Whooo flippity hooooo. I might acutally be able to drive this sum beech in a couple months! Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-10-2006, 09:49 PM	#87
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,611	Re: Not another build thread! Progress on my '67 Congrats, but boy you bettter slow down...you are getting to fer ahead of me. Work and progress looks great on the truck. Looking forward to seeing the final assembly and tire melting. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-11-2006, 10:55 AM	#88
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I promised the girlfriend I'd leave the "other woman" alone for a few weeks and spend the next couple weekends with her before she goes back to UGA to her junior year in graduate vet school (she's gonna be like 25 when she finally graduates but she'll be making lots of money so I can buy more projects) SO you've got about 3 weeks to catch up I'm gonna be pushin for early september.... now where am I gonna get another $1,800 to finish??? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-11-2006, 01:03 PM	#89
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,611	Re: Not another build thread! Progress on my '67 I think you might still beat me even with that delay. It is looking nuce though. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-12-2006, 10:00 AM	#90
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Not another build thread! Progress on my '67 That's looking great! You've gotten a lot farther than I have on mine in the near year I've had it. I told myself when I started the new job in January that I would make progress since I wouldn't be driving and I still drive it too much. Man, this board sure is motivation to do stuff though!



Register or Log In To remove these advertisements.

07-12-2006, 10:33 AM	#91
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Not another build thread! Progress on my '67 Looking great! I really like that color! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-14-2006, 04:51 PM	#92
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: Not another build thread! Progress on my '67 I like the color as well! It looks very familiar... I'm looking forward to attempting a gas tank relocation of my own. __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968. Last edited by ThatOneBlue67; 07-14-2006 at 04:51 PM.

07-14-2006, 05:52 PM	#93
MisterMan Account Suspended Join Date: Jan 2006 Location: Visalia, California Posts: 286	Re: Not another build thread! Progress on my '67 waxing in sun!!??... oh... riskey!!... looks awesome man! --den

07-15-2006, 10:01 PM	#94
"67"StepSide Junior Member Join Date: Oct 2005 Location: connecticut Posts: 263	Re: Not another build thread! Progress on my '67 Nice job!!!!!! Love to see progress!!!

07-16-2006, 04:08 PM	#95
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 The color is a 1999 (and I'm sure it applied to many other years as well, I just so happened to see it under 1999 in the paint book) GM medium blue metallic. It looks dark in some of the pics, but in person the color is actually pretty light and somewhat close to the original interior color of the truck (the truck was originally blue interior with white exterior). I love progress too! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-16-2006, 04:44 PM	#96
HotRod71 Short, Fleet, Slammed, V8 Club Join Date: Mar 2006 Location: Kingsport,TN Posts: 450	Re: Not another build thread! Progress on my '67 I was gonna say it looked like Med. Quasar Blue Metallic that was on my 91 Vette. Looks great __________________ Bill 71 Chevy SWB Fleetside (WIP) www.4x4grace.com

07-17-2006, 08:19 AM	#98
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I worked real hard this weekend on the truck.... I somehow managed to paint my repop bowtie the same color as the truck and put some clear on it. Well, at least as close as Wal-Mart's med. blue metallic spray can paint is I also painted the two grill pieces white, haven't cleared them yet, and I started to clean up all of the brackets and taillights for the bed. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 07-17-2006 at 08:21 AM.

07-17-2006, 11:48 AM	#99
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Not another build thread! Progress on my '67 I just read this thread from start to finish (took about 1/2 hour for all the pics to load w/stupid dialup connection) and just want to say you should be proud of the job you've done on your truck! It looks great. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-17-2006, 12:16 PM	#100
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Re: Not another build thread! Progress on my '67 Very awesome job! This thread is inspiring! I need to get off my butt and get working on my blazer! ---- Pete '72 K5 Blazer '87 V10 Suburban Pictures of my trucks! GMTrucks.org - Absolutely Free Forums, Classifieds, FAQ, Image Hosting, and More!

Register or Log In To remove these advertisements.