Anyone have experience installing CPP c-nothch kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

D-n-Tyke · 03-05-2023, 02:14 AM

I bought CPP's c-notch kit as I am planning on running a 4/6 or 5/7 static drop on my 69 C20 suburban. I was crawling around under the truck today and noticed that there is a body mount bracket right by where the c-notch bracket gets installed. I didn't have the kit with me today but I am wondering if I am going to run into problems with that body mount bracket interfering with the c-notch bracket. Has anyone installed this kit? Did you run into issues? What was yoyr experience?

CPP P/N: CNK6372HD

**HO455** · 03-05-2023, 02:49 PM

I'm almost certain member Hart_Rod used them in his SuperBurb build. (See build section) His build thread is like 75 pages long so you will have some reading but, his Burban is one of the very finest around so its an easy read.

Correction his old Burban. He sold it awhile back.

CG · 03-05-2023, 03:55 PM

Dunno if this is any help. Same notches put on my panel. I didn't do them though a board member did all the chassis stuff for me. Not sure if Burb and panel are the same back there.

D-n-Tyke · 03-06-2023, 03:05 AM

HO455 ‐ Thanks for the lead. I will have to read theu his thread

CG - Thanks for the picture. What I am trying to figure out is how people have handled the body mount bracket that is in the outside of the frame.

NJ68stepside · 03-06-2023, 10:31 AM

Just get a good pneumatic air hammer. Mine was a cheapo and I magnetized a few tools by the time I was done. And bruised a few knuckles

03-05-2023, 02:14 AM	#1
D-n-Tyke Registered User Join Date: Aug 2016 Location: El Cajon, CA Posts: 249	Anyone have experience installing CPP c-nothch kit? I bought CPP's c-notch kit as I am planning on running a 4/6 or 5/7 static drop on my 69 C20 suburban. I was crawling around under the truck today and noticed that there is a body mount bracket right by where the c-notch bracket gets installed. I didn't have the kit with me today but I am wondering if I am going to run into problems with that body mount bracket interfering with the c-notch bracket. Has anyone installed this kit? Did you run into issues? What was yoyr experience? CPP P/N: CNK6372HD Attached Images

03-05-2023, 02:49 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,804	Re: Anyone have experience installing CPP c-nothch kit? I'm almost certain member Hart_Rod used them in his SuperBurb build. (See build section) His build thread is like 75 pages long so you will have some reading but, his Burban is one of the very finest around so its an easy read. Correction his old Burban. He sold it awhile back. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-05-2023, 03:55 PM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,776	Re: Anyone have experience installing CPP c-nothch kit? Dunno if this is any help. Same notches put on my panel. I didn't do them though a board member did all the chassis stuff for me. Not sure if Burb and panel are the same back there. __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

03-06-2023, 03:05 AM	#4
D-n-Tyke Registered User Join Date: Aug 2016 Location: El Cajon, CA Posts: 249	Re: Anyone have experience installing CPP c-nothch kit? HO455 ‐ Thanks for the lead. I will have to read theu his thread CG - Thanks for the picture. What I am trying to figure out is how people have handled the body mount bracket that is in the outside of the frame.

03-06-2023, 10:31 AM	#5
NJ68stepside Registered User Join Date: Nov 2020 Location: Berlin, nj Posts: 65	Re: Anyone have experience installing CPP c-nothch kit? Just get a good pneumatic air hammer. Mine was a cheapo and I magnetized a few tools by the time I was done. And bruised a few knuckles __________________ Please be patient. I’m a ford guy. This is my 1st Chevy. Previous cars: 1973 mustang convertible 2003 mustang Mach 1 Now building resto mod 68 C10 step



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.