Blackjack headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 03-23-2002, 08:29 PM

Has anyone ever seen blackjack headers to fit a 67-72 chevy? I have heard that they were really good, but I have only seen them for cars and a dodge truck.

Longhorn Man · 03-23-2002, 08:35 PM

The ones we had on a mote carlo were junk...just experiance.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
Need to pick up the one ton Longhorn with a PONTIAC 350/350soon.
Thanks every one!

Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

**Tim Christian** · 03-23-2002, 08:36 PM

They are a guy that sells them on e-bay sometimes brand new for 59.99 for our trucks

------------------
67 GMC Stepside(UNDER CONSTRUCTION)
67 GMC Custom
67 Chevy C-30

[This message has been edited by Tim Christian (edited March 23, 2002).]

sam's 72 · 03-23-2002, 08:51 PM

Yes, they do make them, I had a set on a 71, bought them through HI/LO auto parts, when they were in business. I didnt like these, very small primary and the collevtors to me was not long enough, they pointed down in an angle, instead of straight back, I would in vest in a good set of Hookers. Just my 2 cents worth!
Sam

69 longhorn · 03-23-2002, 09:00 PM

I just put a set of hooker comps on the longhorn. I like the fit,nice heavy headers & flanges,& collectors are straight on the bottom/good ground clearance.....69 longhorn.

**68SWB4x4** · 03-23-2002, 10:54 PM

i thought blackjacks were the same thing as dynomax?

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

Pont · 03-23-2002, 11:41 PM

I don't know about Blackjacks being the same as Dynomax but I believe they are the same as Cyclone headers. I think that they were bought out or owned by Mr Gasket. At least I think they were back in the days when I used to sell auto parts.

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

Brad69 · 03-23-2002, 11:54 PM

Nope, Mr. gasket doesn't have any exhaust products in it's line. Accell, Mallory, Erson, Hayes, and Lakewood are the Mr. Gasket brands.

Pont · 03-24-2002, 12:26 AM

my mistake, I thought Mr Gasket had acquired them. It seemed like they were buying up alot of companies back in those days. Sorry for any misleading info I have sent out there.

Pont

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

03-23-2002, 08:29 PM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Blackjack headers Has anyone ever seen blackjack headers to fit a 67-72 chevy? I have heard that they were really good, but I have only seen them for cars and a dodge truck. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-23-2002, 08:51 PM	#4
sam's 72 Senior Member Join Date: Nov 2001 Location: Pasadena, Texas, USA Posts: 1,005	Yes, they do make them, I had a set on a 71, bought them through HI/LO auto parts, when they were in business. I didnt like these, very small primary and the collevtors to me was not long enough, they pointed down in an angle, instead of straight back, I would in vest in a good set of Hookers. Just my 2 cents worth! Sam __________________ 72 LWB chevy truck. Pasadena, Texas

03-23-2002, 09:00 PM	#5
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	I just put a set of hooker comps on the longhorn. I like the fit,nice heavy headers & flanges,& collectors are straight on the bottom/good ground clearance.....69 longhorn. __________________ http://community.webshots.com/user/hotrodhorn

03-23-2002, 10:54 PM	#6
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	i thought blackjacks were the same thing as dynomax? ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

03-23-2002, 11:41 PM	#7
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	I don't know about Blackjacks being the same as Dynomax but I believe they are the same as Cyclone headers. I think that they were bought out or owned by Mr Gasket. At least I think they were back in the days when I used to sell auto parts. ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

03-23-2002, 08:35 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	The ones we had on a mote carlo were junk...just experiance. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. Need to pick up the one ton Longhorn with a PONTIAC 350/350soon. Thanks every one! Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

03-23-2002, 08:36 PM	#3
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	They are a guy that sells them on e-bay sometimes brand new for 59.99 for our trucks ------------------ 67 GMC Stepside(UNDER CONSTRUCTION) 67 GMC Custom 67 Chevy C-30 [This message has been edited by Tim Christian (edited March 23, 2002).]

03-23-2002, 11:54 PM	#8
Brad69 Crash Test Dummy Join Date: Feb 2000 Location: Wilton, Ca. USA Posts: 201	Nope, Mr. gasket doesn't have any exhaust products in it's line. Accell, Mallory, Erson, Hayes, and Lakewood are the Mr. Gasket brands. __________________ The more hair i lose, the more head i get. Build Sheet: 1969 C-10 short fleet Constructed by taking a 3/4 ton rolling frame from one truck, adding a rust free AC Cab from another, then a bed from another, 1/2 ton front suspension & brakes from another,add in one Goodwrench crate 350, painted DuPont Arctic White,and driven daily.

03-24-2002, 12:26 AM	#9
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	my mistake, I thought Mr Gasket had acquired them. It seemed like they were buying up alot of companies back in those days. Sorry for any misleading info I have sent out there. Pont ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.