The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-01-2010, 06:43 PM   #1
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Tami's 51 build

The shop is finally empty enough to start on the wife's 51.
This should be interesting !!
We bought it as an unfinished project. and yes , it was screwed up. we have to remove the front cowls because they were not measured right. but other than that, it's not that bad. We decided to start off with the chop, so just in case I really screw up, I haven't wasted any time or money...so... here we go !!








skip99 is offline   Reply With Quote
Old 11-01-2010, 07:30 PM   #2
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Tami's 51 build

Welcome to the site and its looking good man. Keep postings we love pics.
Kabwe is offline   Reply With Quote
Old 11-01-2010, 07:34 PM   #3
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Tami's 51 build

Good start. Welcome from out West.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 11-01-2010, 07:36 PM   #4
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

BY the way, this is Tami, she tells me what to do to HER truck, and she takes all the pictures, I started the thread for her so she could ask questions and help make up her mind about the build....She is a woman afterall !!

skip99 is offline   Reply With Quote
Old 11-01-2010, 07:56 PM   #5
Tri5Nerd
Tripple Five Fanatic
 
Tri5Nerd's Avatar
 
Join Date: Sep 2006
Location: USA
Posts: 658
Re: Tami's 51 build

Welcome to the forum, It appears that you have the skillset to make a really nice truck, hell; you chopping the top is hard enough and take a lot of knowledge and skill.

BTW: Your wife is beautiful (compilment)

Tri5
__________________
1955 Chevy Stepside/LS1 drive train
http://67-72chevytrucks.com/vboard/s...d.php?t=371513
Tri5Nerd is offline   Reply With Quote
Old 11-01-2010, 09:48 PM   #6
jimig1
Registered User
 
jimig1's Avatar
 
Join Date: Jul 2010
Location: Elk River, MN
Posts: 614
Re: Tami's 51 build

My wife is the reason that I have my 55.5 pickup I wanted something pre 64 and we were at a car show and she decide that she likes trucks so that is what we got. Although she really likes my dads 56 Nomad but he wont give it up.
__________________
55 2nd series Chevy Pickup
2019 Chevy Equinox(Daily driver)
2011 Chevy Malibu (Wife's car)
MSRA Member

I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose.
-George Carlin
jimig1 is offline   Reply With Quote
Old 11-01-2010, 10:20 PM   #7
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: Tami's 51 build

How much of a chop is that? Please post pictures of the welds on the chop and if you could please show the backside to see the penetration on the sheetmetal. I am a novice and enjoy pictures. Thanx!
Fat Mike is offline   Reply With Quote
Old 11-02-2010, 11:53 PM   #8
av8tr33337
Registered User
 
av8tr33337's Avatar
 
Join Date: Mar 2009
Location: Derby Kansas
Posts: 564
Re: Tami's 51 build

Welcome and very nice start. Hope to see more progress pics soon. I'm subscribed.
__________________
av8tr33337
AKA Bartman Email av8tr33337@yahoo.com

Bartman's Ad-S10 Chassis Swap
http://67-72chevytrucks.com/vboard/s...d.php?t=415418

My First Youtube Video
http://www.youtube.com/watch?v=B6hSt...eature=channel

More Pics of the 51 Project
http://s668.photobucket.com/albums/v...hassis%20Swap/

1951 3100 Pickup
av8tr33337 is offline   Reply With Quote
Old 11-03-2010, 10:47 AM   #9
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

hey FAT MIKE, will do !! this is chopped 3" in the back and 3 1/2 in the front, me and the wife are both tall, and that's about all I could take..going out to work on it now, pics later tonight..
skip99 is offline   Reply With Quote
Old 11-03-2010, 01:04 PM   #10
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: Tami's 51 build

Thanks for the info! I plan on doing a 3" chop and relocating the rear window.
Fat Mike is offline   Reply With Quote
Old 11-03-2010, 02:46 PM   #11
nickp51chevy
Registered Chevy Owner
 
nickp51chevy's Avatar
 
Join Date: Aug 2008
Location: Snohomish, wa
Posts: 1,557
Re: Tami's 51 build

Sweet truck, but I am partial to the '51's
__________________
Love is fleeting, but Chevy trucks are forever!!!!

1970 Chevy CST C10 long box 350/400
2008 Chevy Silverado short box 4x4

Had;
1951 Chevy short box 307/T5
1988 Chevy shot box 4x4 350/350
1971 Chevy C10 long box 4x4 350/350
1971 Chevy C20 long box 350/350
1971 Chevy C10 long box 350/350
nickp51chevy is offline   Reply With Quote
Old 11-03-2010, 04:13 PM   #12
av8tr33337
Registered User
 
av8tr33337's Avatar
 
Join Date: Mar 2009
Location: Derby Kansas
Posts: 564
Re: Tami's 51 build

Oh by the way, she's a looker........ your wife is pretty easy on the eyes too!!!
__________________
av8tr33337
AKA Bartman Email av8tr33337@yahoo.com

Bartman's Ad-S10 Chassis Swap
http://67-72chevytrucks.com/vboard/s...d.php?t=415418

My First Youtube Video
http://www.youtube.com/watch?v=B6hSt...eature=channel

More Pics of the 51 Project
http://s668.photobucket.com/albums/v...hassis%20Swap/

1951 3100 Pickup
av8tr33337 is offline   Reply With Quote
Old 11-03-2010, 06:21 PM   #13
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

This is all we accomplished today, take your time and get it straight, we even went as far as to go ahead and cut the top frames off the doors and hold them in the door opening just to check for straightness,
the top 1/2 of the window was tacked into place, and then each rear corner is fitted, you can see that the corners move out about an inch.
I used thin cutoff blades to "run" in the crack between the panels to straighten them up, and the result is a real nice fit ready to butt weld.
You'll notice that the only thing welded is the rear window, thats because I am doing a 3" rear, 3 1/2" front chop, and when I fit the front corners, I might have to take a little more metal out of the front of the rear corners( side, right next to door) so the roof can basically tilt forward. trim, fit, measure, repeat! don't weld til its ready..








Last edited by skip99; 11-03-2010 at 06:35 PM.
skip99 is offline   Reply With Quote
Old 11-03-2010, 08:00 PM   #14
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Tami's 51 build

Looking good. Keep up the good work.
Kabwe is offline   Reply With Quote
Old 11-03-2010, 11:43 PM   #15
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: Tami's 51 build

That sure makes for a nice project.
What are you using for a seat, after you lower the roof?
My wife was the excuse for my current build, and she picked the colors and upholstery and this one had to be a auto !
Attached Images
 
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 11-10-2010, 06:13 PM   #16
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

Let me start off by saying.."HOLY CRAP !!!"
It's a good thing I have patience..this has been a monster to line back and get straight...I'm not real sure which way is better of if it really matters... some choose to simply chop the top, make relief cuts and bend the post back and make it fit, the advantage to splitting the panel is that the angles stay correct, the front windshield does not lean back, and the doors will be wider at the top, in other words, it does not come to a point quicker. BUT, it was a pain to line up all the cut panels..so if I had to do it again?...
well, here's where we are...maybe I'm being too picky..
I really like the way the rear lines up, hardly any filler at all, the rest would also use no filler if I used a cutoff blade and made the filler strips butt to each other, but all I had was 1/32 blade and it seemed like a big gap, so I decided to just overlap the strips underneath and lap weld.
As it turns out , that was a good choice, because the roof seemed to want to flex down, so I just pushed up a little while welding, and now it has a nice stiff roundness to it that does not give like a lot of roof panels do..




Last edited by skip99; 11-10-2010 at 06:24 PM.
skip99 is offline   Reply With Quote
Old 11-10-2010, 06:39 PM   #17
Fat Mike
Registered User
 
Fat Mike's Avatar
 
Join Date: Sep 2009
Location: Albuquerque, NM
Posts: 540
Re: Tami's 51 build

Looking very good! You have to have alot of patient I am sure to chop and put 10 billion little tack welds. Keep the good work and please so the penetration on the inside of your welds. THANX!
Fat Mike is offline   Reply With Quote
Old 11-10-2010, 06:48 PM   #18
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: Tami's 51 build

Looks great. Keep it up man.
Kabwe is offline   Reply With Quote
Old 11-22-2010, 02:25 PM   #19
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

Well, it's been a hell of a week, didnt get a lot done, if any of you watch the news..you know what's been going on in Mt Vernon, Ohio...
neighbors of mine...

SO.... here's where we are now, mostly just finishing up on the roof chop, it is definitely a PITA, doing it this way, but I think the outcome will be better? I don't know 6 of 1,,, 1/2 dozen of the other. I do think I like the look better when the pillars and post have not been cut and bent, ( and the roof skin stays the same dimensions) as opposed to the path I chose ( section the roof skin and the door, window frame) It might take less time to just bend the posts and make relief cuts on the cab corners, not sure, But I can say it takes a LOT of time to fit the roof skin back together and use filler strips, the areas where it is able to be butt welded turned out great, I was having trouble keeping the round shape to the top of the roof, while at the same time getting it all clecoed? together.
so I built a little rounded brace for under the roof to help and then I decided to just lap weld the joints, since it was in the shape I wanted.. I think I should have taken the time(more PITA) and butt welded the whole thing, but all I have is a MIG and even on the lowest setting, it was tough to keep from blowing through.
everywhere there was a butt weld it was easy to work the metal flat.. this also means there will be just a small skim coat of filler on the lap welds. not a lot, as I went ahead and hammer and dollied them close to flat too.. here's a few pics...

FAT MIKE, there was a small gap even on the butt welds , so I just held a copper spoon behind the gap as I welded so it pretty much penetrated all the way.. close up for ya!



Butt welds at the cab corner


area just above the rear window


front pillar post


Last edited by skip99; 11-22-2010 at 02:28 PM.
skip99 is offline   Reply With Quote
Old 11-22-2010, 02:32 PM   #20
skip99
Registered User
 
skip99's Avatar
 
Join Date: Oct 2010
Location: mt vernon, oh
Posts: 867
Re: Tami's 51 build

we took all the drip rail off, any opinions as to leaving it smooth, ?

what about the windlace strip that runs around the inside of the door opening? mine was all screwed up.. so I cut it out.. is it really needed?
skip99 is offline   Reply With Quote
Old 11-22-2010, 04:37 PM   #21
Spackle100
Registered User
 
Join Date: Feb 2010
Location: Cardiff, CA
Posts: 131
Re: Tami's 51 build

Quote:
Originally Posted by skip99 View Post
we took all the drip rail off, any opinions as to leaving it smooth, ?

what about the windlace strip that runs around the inside of the door opening? mine was all screwed up.. so I cut it out.. is it really needed?
Ask Kabwe. The guy is a master. Check out post #4 on his build thread http://67-72chevytrucks.com/vboard/s...d.php?t=318301

Last edited by Spackle100; 11-22-2010 at 04:42 PM.
Spackle100 is offline   Reply With Quote
Old 11-22-2010, 04:42 PM   #22
Spackle100
Registered User
 
Join Date: Feb 2010
Location: Cardiff, CA
Posts: 131
Re: Tami's 51 build

Sorry, I just realized he has a 55 and you have a 51...
Spackle100 is offline   Reply With Quote
Old 11-22-2010, 05:06 PM   #23
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Tami's 51 build

Those welds are looking fine to me. Good progress.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 11-22-2010, 05:07 PM   #24
britnjc
Registered User
 
britnjc's Avatar
 
Join Date: Mar 2009
Location: Helena, Alabama
Posts: 453
Re: Tami's 51 build

I shaved my drip rail. Is it needed? well i dont know I havent really driven it in the rain I would suspect it will be fine. As far as the inside windlace I think is a waste of rubber. I put mine in and it is a pain in the rump to install. It doesnt even really seal anything very good either. It is more cosmetic than anything and not really good at that.
britnjc is offline   Reply With Quote
Old 11-22-2010, 05:10 PM   #25
Pop's C-10
Registered User
 
Pop's C-10's Avatar
 
Join Date: Jul 2010
Location: memphis
Posts: 2,537
Re: Tami's 51 build

nice work on tha chop
Pop's C-10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com