The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-02-2021, 10:04 AM   #76
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Pretty much done with the exhaust. I ended up switching from 2.25” to 2.5” pipes. Picked up the straight tubes from a local shop and ordered a Flowmaster tailpipe kit #15802 and Walker SS Quiet Flow mufflers. Cutting it close on the header ground clearance though, got 5” on the driver side & 4.5” passenger but thats with the mustang suspension completely lowered. Will probably raise it up an inch or so.
Attached Images
     
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-02-2021, 10:35 AM   #77
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,746
Re: '50 3600 re-do. Shortening things up!

Drop all the suspension and see what you have for clearance if youre worried. Go from there. Only takes a floor jack and a few minutes.
dsraven is offline   Reply With Quote
Old 05-07-2021, 12:00 AM   #78
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Really wanted to use the full length headers but they were too low for comfort. I really didn’t want to raise the front up either. This is Much better!
Attached Images
  
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-07-2021, 07:23 AM   #79
6DoF
Registered User
 
6DoF's Avatar
 
Join Date: Nov 2014
Location: somewhere, PA
Posts: 1,015
Re: '50 3600 re-do. Shortening things up!

those headers were a tad crazy, good call
6DoF is offline   Reply With Quote
Old 05-11-2021, 12:19 AM   #80
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Yeah, if the truck wasn’t lowered they’d be perfect. If anyone needs them hit me up!
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-11-2021, 02:01 AM   #81
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,800
Re: '50 3600 re-do. Shortening things up!

I dig the fuel tank
Gregski is offline   Reply With Quote
Old 05-12-2021, 10:34 AM   #82
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Quote:
Originally Posted by Gregski View Post
I dig the fuel tank
Thank you sir!
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-12-2021, 10:35 AM   #83
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

The front coil overs and control arms have arrived. Hopefully I can get to them this weekend!
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-14-2021, 11:45 AM   #84
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

The new control arms are wider, gonna have to shim them.
Attached Images
  
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-14-2021, 12:05 PM   #85
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,258
Re: '50 3600 re-do. Shortening things up!

Who made them?

I'm going to lower the 54 and have been looking at front control arms is why I ask.
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 05-14-2021, 12:36 PM   #86
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Quote:
Originally Posted by 8man View Post
Who made them?

I'm going to lower the 54 and have been looking at front control arms is why I ask.
I bought them off Ebay, but they're part of a kit from CCP.

https://www.classicperform.com/NewPr...COIL-OVERS.htm
Attached Images
 
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-14-2021, 12:41 PM   #87
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,258
Re: '50 3600 re-do. Shortening things up!

Thanks.

Please show the "shimming".
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 05-14-2021, 12:57 PM   #88
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Will do. Haven't given much thought as to what I'll use yet. Not sure if a few washers would do the trick or not.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-17-2021, 12:06 PM   #89
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Quote:
Originally Posted by 8man View Post
Thanks.

Please show the "shimming".
I'll post a pic later, but the old ball joint space was a perfect fit.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-17-2021, 12:49 PM   #90
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,746
Re: '50 3600 re-do. Shortening things up!

stainless steel washers work great. get the large OD with the size of ID you need. a little silicone grease works great to lube and also hold them together for assembly.
the extra width between the pivots may be a nightmare for the alignment guy because it will put the ball joint forward or back from where it may need to be. he can simply move the shims around though. if you use the body fender washer style of washer they will be thin and he can micro adjust the ball joint position by moving the shims as required. ball joint position will affect the caster.
dsraven is offline   Reply With Quote
Old 05-18-2021, 08:50 AM   #91
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Quote:
Originally Posted by dsraven View Post
stainless steel washers work great. get the large OD with the size of ID you need.
You know, I actually did that on the passenger side but when I moved on the the drivers side I discovered the ball joint spacer was a perfect fit. I didn't feel like disassembling the passenger side so I left it as is! Lol! Also, of note, the spacers have to go on the front of the crossmember. My 1st attempt was on the rear but I discovered that the coil over didn't line up with the mounting holes on the control arm.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 05-23-2021, 02:32 PM   #92
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Finished with the front coil overs. Disappointed that the sway bar I had laying around wouldn’t fit, it’s about 4” too long.
Attached Images
   
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 06-03-2021, 09:09 AM   #93
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

I just noticed how close the driveshaft is to the rear cab brace. There's only about 2" of clearance. Thinking I can notch this for additional space without causing any structural issues. Am I on the right track here?
Attached Images
  
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 06-03-2021, 10:29 AM   #94
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,746
Re: '50 3600 re-do. Shortening things up!

Lots of builds have notched that member. When you do it may be a good idea to check what you need for space with the rear suspension fully compressed. That way you know you're good no matter what or you know you need to install suspension limiters so you are safe from contact if you happen to hit one of those hidden whoopty-do bumps that sneak up on you.
dsraven is offline   Reply With Quote
Old 06-04-2021, 09:56 AM   #95
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Thanks for confirming and for the tip.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 06-04-2021, 11:37 AM   #96
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,746
Re: '50 3600 re-do. Shortening things up!

I've seen a few who have used a section of heavy wall tubing to make the notch. Also seen a few who had to notch the back of the cab for sufficient driveshaft clearance. Seen some with a 2 piece driveshaft as well so that the forward section doesnt move up and down when the suspension moves.
dsraven is offline   Reply With Quote
Old 06-05-2021, 01:30 PM   #97
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Quote:
Originally Posted by dsraven View Post
I've seen a few who have used a section of heavy wall tubing to make the notch. Also seen a few who had to notch the back of the cab for sufficient driveshaft clearance. Seen some with a 2 piece driveshaft as well so that the forward section doesnt move up and down when the suspension moves.
The two piece shaft sounds pretty cool. Think I’m going to take the simplest route and cut it.
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 06-15-2021, 09:38 PM   #98
mobileortho
Registered User
 
mobileortho's Avatar
 
Join Date: Sep 2008
Location: Hampton, VA
Posts: 862
Re: '50 3600 re-do. Shortening things up!

Picked a a good deal on a chromed grill. Found it on one of the Facebook AD forums. It’s new, never installed but has a very small dent on one of the bars. $300, shipping included.
Attached Images
 
__________________
Robert C.

1950 3600
3600 re-do, shortening it up

If it's true what they say, "You learn from your mistakes,"
I'm a Genius in the making.
mobileortho is offline   Reply With Quote
Old 06-16-2021, 10:29 AM   #99
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,258
Re: '50 3600 re-do. Shortening things up!

Nice find!
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 06-16-2021, 03:55 PM   #100
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: '50 3600 re-do. Shortening things up!

man that is a nice score.

I really like how you stick with your project without meandering on goals. if it hasnt been mentioned before, you get a lot of my respect for that.
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com