73-87 arms I bought from C10Sim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m6z · 06-12-2009, 08:00 AM

I purchased a set of control arms from C10Sim. I believed I was receiving a set of controls arms that had been rebuilt and were ready to bolt on. This is what I actually received.

When I received the arms. I was not happy. So I sent a pm to C10Sim.

Quote:

Originally Posted by C10Sim

Quote:

Originally Posted by m6z

Quote:

Originally Posted by C10Sim

Quote:

Originally Posted by m6z

Seriously? I bought the a set of arms with new bushings & ball joints. It would of been appreciate for you to inform me that they were only half done. I was expecting a set of ready to bolt on arms. Not a set that I still had to press out and install a new lower balljoint & finish up assembleing the upper arm.

This is not acceptable,
Doug

Im sorry you feel that way, But the reason they were not pressed in was because my intentions were to powercoat the lower arms and then install them. Sorry for the miscommunication...

If that's was the case. Why didn't you leave both the lowers uninstalled?

The idea came up after I had the bushings installed and this why I stopped there.

Here's a link to the for sale add.

http://www.67-72chevytrucks.com/vboa...d.php?t=345086

I guess my question is. Am I the one in the wrong here? Looking at his original add and picts posted. Would you of thought you were getting a set rebuilt arms that were ready to bolt on?

Eturnit3 · 06-12-2009, 03:05 PM

has he offered anyway to make it right?

**special-K** · 06-14-2009, 07:52 AM

I looked at the ad and don`t see where it says anything different that you got.They were offered w/o,then with the bag plates,which kinda indicates they are seperate."With" just indicates "included" in my mind.I see a loose ball joint,just like what you got.He doesn`t state they are ready to bolt on.Interpretting impressions can produce multiple results.Going by what is stated you got everything.

joe231 · 08-29-2009, 11:08 PM

Looks to me you were buying complete arms with cross shafts that were ready to bolt on.

That is what the pics lead me to believe.....if that wasn't the case it should have been stated in the ad.

06-12-2009, 03:05 PM	#2
Eturnit3 Bloodied Knuckles Join Date: Jan 2009 Location: Grass Valley CA Posts: 273	Re: 73-87 arms I bought from C10Sim has he offered anyway to make it right?

06-14-2009, 07:52 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 73-87 arms I bought from C10Sim I looked at the ad and don`t see where it says anything different that you got.They were offered w/o,then with the bag plates,which kinda indicates they are seperate."With" just indicates "included" in my mind.I see a loose ball joint,just like what you got.He doesn`t state they are ready to bolt on.Interpretting impressions can produce multiple results.Going by what is stated you got everything. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 06-14-2009 at 08:00 AM.

08-29-2009, 11:08 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 73-87 arms I bought from C10Sim Looks to me you were buying complete arms with cross shafts that were ready to bolt on. That is what the pics lead me to believe.....if that wasn't the case it should have been stated in the ad. __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.