F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Request? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LostMy65** · 08-24-2018, 02:22 PM

Do you ever come across Barden Bumpers?
I'm looking for one local but has the Woodland CA plate.

**Classic Bowties** · 08-28-2018, 02:29 AM

Quote:

Originally Posted by Baker70

Payment sent for above pictured items!

All of the big block parts pictured in above post #73 & #74 are headed your way, the package went out via FedEx home delivery on Mon. 08/27 and as of this evening, the FedEx website is projecting that you should see the parts this Sat. 09/01 by the end of the day. Thanks again and let us know if we can help with anything else 67-72 related in the future, Mel

**Njeiv** · 09-02-2018, 10:25 PM

I’ll take the OE 72 big block engine tower/clam shell setup for 200

68is4me · 02-25-2019, 02:23 PM

Sent you a PM looking for a w/p pulley?

**Classic Bowties** · 02-26-2019, 01:51 AM

Quote:

Originally Posted by 68is4me

Sent you a PM looking for a w/p pulley?

The 648 BBC water pump pulley part number that you sent via pm would not be correct for a 68 BBC with A/C, the 648 was a later style BBC SWP 2 groove w/p pulley. If trying to stay OE, we do have a 68 with A/C two groove 419 BBC water pump pulley available, this upper 419 BBC water pump pulley matches/goes with the lower two groove 414 BBC inner crank pulley. Cost would be $65. + $8. for USPS shipping, if interested payment can be sent via USPS moneyorder, paypal or credit card over the phone. Let me know, Mel

.

68is4me · 02-26-2019, 10:22 AM

Shoot, I am getting my butt kick on this pulley setup. ok so I previously purchased a complete setup from another member and the pulleys are wrong.

so this is what I have.

Crank 3876844
outer crank 3925525
p/s not sure would have to look
w/p 3995646.

Well, do you have a complete pulley kit for 68? I think the only correct one is the outer crank pulley and I would hope the p/s pulley.

I will take the w/p pulley, pending that hopefully you have the others.

**Classic Bowties** · 02-26-2019, 08:53 PM

Quote:

Originally Posted by 68is4me

Shoot, I am getting my butt kick on this pulley setup. ok so I previously purchased a complete setup from another member and the pulleys are wrong.

so this is what I have.

Crank 3876844
outer crank 3925525
p/s not sure would have to look
w/p 3995646.

Well, do you have a complete pulley kit for 68? I think the only correct one is the outer crank pulley and I would hope the p/s pulley.

I will take the w/p pulley, pending that hopefully you have the others.

Sorry to hear about your past pulley search issues and previous pulley purchase, it can be tough getting the correct (confirmed application) parts around here at times. It's always best to confirm p/n's when shopping for pulleys, your above listed 844 inner crank pulley is for several BBC SWP car applications, the 525 BR BBC outer crank P/S pulley is the correct one found on trucks and lines up/matches the 537 DC BBC P/S pump drive pulley, your other above listed 646 w/p pulley is for SB and some I-6 applications.

We do have the correct A/C application 414 BQ BBC 2 groove inner crank pulley (pictured below) available for $50., and could ship it along with the matching A/C 419 CT BBC w/p pulley that we offered you above, shipping on both pulleys combined would be $15. Let us know, Mel

.

68is4me · 02-27-2019, 09:56 AM

I will take both pulleys. I will pay Via PP.

**Classic Bowties** · 02-27-2019, 02:55 PM

Quote:

Originally Posted by 68is4me

I will take both pulleys. I will pay Via PP.

Our info for sending funds via paypal has been returned. Thanks, Mel

Ozark Tim · 02-27-2019, 04:27 PM

Hey Mel
Would you happen to have a Z bar for a big block truck by chance?
I have a 72 C-20 with a 402 4-spd and the Zbar in it has been welded on and isn't quite right
Thanks
Tim

**Classic Bowties** · 02-28-2019, 03:57 AM

Quote:

Originally Posted by 68is4me

I will take both pulleys. I will pay Via PP.

Your BBC water pump and crank pulleys have been shipped off and tracking number returned, the package went out via USPS priority on Wed. 02/27 and USPS has projected that the package will be delivered this Sat. 03/02. Thanks again, Mel

**Eagle9502** · 03-04-2019, 08:27 PM

Mel, PM sent regarding BB pulleys.

68is4me · 03-07-2019, 02:05 PM

Received pulleys on Saturday and they worked great.

Thanks Mel

**Classic Bowties** · 03-09-2019, 12:03 AM

Quote:

Originally Posted by 68is4me

Received pulleys on Saturday and they worked great.

Thanks Mel

Thanks for confirming arrival and was glad to help get your BBC pulley issues sorted out, did you try to contact the other seller that sold you the previously purchased "big block" pulleys? Let me know if we can help with anything else 68-72 big block related.

Quote:

Originally Posted by Eagle9502

Mel, PM sent regarding BB pulleys.

Hello, sorry about missing your pm and the delayed response, we hadn't been around here for a few days and after searching for your pm, I found it was attached to some older messages from our past dealings under the subject heading nos moldings. We should have all of the BBC pulleys on hand besides the 68 big block (one year) 2 groove w/p pulley for a/c, we only had the one that was pictured/sold above, if not planning for a/c we would have the 68 big block single groove w/p pulley available. I can take a look tomorrow, Sat. 03/08 and confirm/let you know what we have available ready to ship. Mel

dave666693 · 06-01-2019, 03:56 PM

would the 1972 power steering and alternator brackets be the same as a 1988 mark 4 block and heads? If so, I am interested in both and a set of 72 and up motor nount brackets/stands

1972larry · 08-12-2019, 06:41 AM

Do you have a clutch pivot bracket. The one on side of block

joeb · 08-17-2019, 09:13 PM

Do you still have the alternator bracket for the BBC?

**Classic Bowties** · 08-29-2019, 02:14 PM

Quote:

Originally Posted by Ozark Tim

Hey Mel
Would you happen to have a Z bar for a big block truck by chance?
I have a 72 C-20 with a 402 4-spd and the Zbar in it has been welded on and isn't quite right
Thanks Tim

Hi Tim, not sure how we missed your earlier post, but will check on this and get back with you.

Quote:

Originally Posted by 1972larry

Do you have a clutch pivot bracket. The one on side of block

Are you needing the bell crank pivot ball stud for a big block, see below BBC pivot Id pics? Confirm motor size and we can check on this for you, the below pictured BBC pivot ball was recently sold to a board member in Canada.

Quote:

Originally Posted by joeb

Do you still have the alternator bracket for the BBC?

Confirm the year/style (see below) of BBC alternator brackets that you are needing/asking for and we can check on availability and get you some pictures. Thanks, Mel

**Classic Bowties** · 08-29-2019, 02:17 PM

Last BBC alternator bracket Id pic...

Big Block 454 · 10-06-2019, 10:10 AM

Looking for 1968 bbc ac brackets for swp. I have the intake manifold bracket and arm as well as the front compressor plate but need the rest.

1972larry · 10-07-2019, 05:40 PM

Do you still have the clutch z bar bracket

**GSFMECH** · 10-10-2019, 07:26 AM

Hi Mel,

would you happen to have another BB fan shroud?

**Classic Bowties** · 10-14-2019, 08:21 PM

Quote:

Originally Posted by Ozark Tim

Hey Mel
Would you happen to have a Z bar for a big block truck by chance?
I have a 72 C-20 with a 402 4-spd and the Zbar in it has been welded on and isn't quite right
Thanks
Tim

Hi Tim, if still needing/looking, we now have an original BBC bellcrank/z bar available by itself, the pictured bellcrank was also removed from a 72 C/20 402 big block truck. Part is in good used OE condition with nice non-worn/still round fork and pedal push rod pivot holes. $75. + $10. for the ride, payment can be sent via US postal moneyorder, paypal or credit card over the phone. Let me know, Mel

.

**Classic Bowties** · 10-14-2019, 08:46 PM

Quote:

Originally Posted by 1972larry

Do you still have the clutch z bar bracket

That pictured engine side BBC bellcrank/z bar pivot ball stud seen earlier in thread has been sold/shipped, we do have another original BBC bellcrank pivot ball stud available, this one was removed from an original 72 C/20 402 big block truck. $165. + $10. for the ride, payment can be sent via US postal moneyorder, paypal or credit card over the phone. Let us know, Mel

.

**Classic Bowties** · 10-14-2019, 09:10 PM

Quote:

Originally Posted by GSFMECH

Hi Mel,

would you happen to have another BB fan shroud?

Hello Mike, we do have this extra nice OE BBC fan shroud on hand/available @ $150. + shipping, probably expect $50.-$60. for safely packed double boxed fedex shipment. If you let me know your shipping Zip and confirm if business or residential I can get the fedex ship cost, this may be one of them parts that you would want to find closer to home, maybe a pick up in hand type deal. Let me know, Mel

.

08-24-2018, 02:22 PM	#76
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,460	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Do you ever come across Barden Bumpers? I'm looking for one local but has the Woodland CA plate. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

09-02-2018, 10:25 PM	#78
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 517	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque I’ll take the OE 72 big block engine tower/clam shell setup for 200

02-25-2019, 02:23 PM	#79
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Sent you a PM looking for a w/p pulley? __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

02-26-2019, 10:22 AM	#81
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Shoot, I am getting my butt kick on this pulley setup. ok so I previously purchased a complete setup from another member and the pulleys are wrong. so this is what I have. Crank 3876844 outer crank 3925525 p/s not sure would have to look w/p 3995646. Well, do you have a complete pulley kit for 68? I think the only correct one is the outer crank pulley and I would hope the p/s pulley. I will take the w/p pulley, pending that hopefully you have the others. __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

02-27-2019, 09:56 AM	#83
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque I will take both pulleys. I will pay Via PP. __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

02-27-2019, 04:27 PM	#85
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Hey Mel Would you happen to have a Z bar for a big block truck by chance? I have a 72 C-20 with a 402 4-spd and the Zbar in it has been welded on and isn't quite right Thanks Tim

03-04-2019, 08:27 PM	#87
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 834	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Mel, PM sent regarding BB pulleys.

03-07-2019, 02:05 PM	#88
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Received pulleys on Saturday and they worked great. Thanks Mel Attached Images __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

06-01-2019, 03:56 PM	#90
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque would the 1972 power steering and alternator brackets be the same as a 1988 mark 4 block and heads? If so, I am interested in both and a set of 72 and up motor nount brackets/stands __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

08-12-2019, 06:41 AM	#91
1972larry Registered User Join Date: Jan 2014 Location: weaubleau mo Posts: 166	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Do you have a clutch pivot bracket. The one on side of block

08-17-2019, 09:13 PM	#92
joeb Registered User Join Date: Jul 2011 Location: Orange, TX Posts: 12	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Do you still have the alternator bracket for the BBC?

08-29-2019, 02:17 PM	#94
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,538	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Last BBC alternator bracket Id pic... Attached Images

10-06-2019, 10:10 AM	#95
Big Block 454 Registered User Join Date: Jul 2012 Location: So Cal Posts: 127	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Looking for 1968 bbc ac brackets for swp. I have the intake manifold bracket and arm as well as the front compressor plate but need the rest.

10-07-2019, 05:40 PM	#96
1972larry Registered User Join Date: Jan 2014 Location: weaubleau mo Posts: 166	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Do you still have the clutch z bar bracket

10-10-2019, 07:26 AM	#97
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 805	Re: F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Reque Hi Mel, would you happen to have another BB fan shroud? __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.