The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-04-2021, 12:45 AM   #751
vintovka
Registered User
 
vintovka's Avatar
 
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,771
Re: Post your C/L finds for everyone to enjoy!

Original 54??







https://bend.craigslist.org/cto/d/po...389203143.html
Attached Images
 
vintovka is offline   Reply With Quote
Old 10-04-2021, 04:05 AM   #752
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

Sounds like the add was written by a flipper or a relative of the guy who owned it.

Still if it is original chassis wise a quick wheel and tire change back to stock wheels (which are probably somewhere on that property) would let a guy paint it back stock and do a few things to have a nice pretty original truck.

Everyone who has been here for while knows that I think that the "patina" craze is one of the biggest jokes laid on car folk outside of laying frame but I'd rather look at that truck with faded and a tad tired original paint with no rust showing than a primer job that may have been slapped on it years back to hide something. That is what you did if you went to sell an old car or truck back in the 70's and 80's that had dead paint or what is now called patina. you sanded it down and laid a few nice coats of primer on it and threw a for sale tag on it with the fresh primer. You would see a half dozen like that for sale at big swap meets.

Still the real value is in what you don't have to do and don't have to go out and buy to make it nice. If it is as good as it looks that might save either a few hundred hours of body work or a few thousand dollars at the body shop and at the body parts peddlers. Sometimes our bargain trucks cost us more in the long run than putting out a bit extra to start.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Last edited by mr48chev; 10-04-2021 at 04:14 AM.
mr48chev is offline   Reply With Quote
Old 10-04-2021, 10:54 AM   #753
vintovka
Registered User
 
vintovka's Avatar
 
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,771
Re: Post your C/L finds for everyone to enjoy!

I see the ad has been "deleted by author" wonder whats up?
vintovka is offline   Reply With Quote
Old 10-04-2021, 12:58 PM   #754
daveshilling
Senior Member
 
daveshilling's Avatar
 
Join Date: Jan 2013
Location: roseville
Posts: 822
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by mr48chev View Post
There is actually seems to be such a thing as a mr_patina_head Kustom paint job but a guy would have to be a real fool to pay someone 10 K to make his truck look like a junk yard reject.

Still on that one the pretty solid body and a long parts list add up real quick to well over 10K.
What a fool to do what he likes with his truck! At least he didn't chop it
daveshilling is offline   Reply With Quote
Old 10-04-2021, 02:23 PM   #755
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

Fake patina is like some of those psychedelic paint jobs that were a big fad in the 70's. Some stayed around in the 80's without getting sanded off and some got hid out in the barn because the owner while no longer wanting to be seen in the car felt that he had so much money in the paint job that he couldn't sand it off and start over.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-04-2021, 02:51 PM   #756
youngrodder
Registered User
 
youngrodder's Avatar
 
Join Date: Mar 2007
Location: Scotts, Michigan
Posts: 3,746
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by daveshilling View Post
What a fool to do what he likes with his truck! At least he didn't chop it
Well said... I don't know why it is soo hard for people to understand to keep their opinions to themselves when it is a negative comment. If I see something that I don't like or is not my style, I just keep moving. I see no sense spouting off about it at great length.

Marc
__________________
…………...........__________
.................. ((__|__||___\____
..;.;;.:;:;.,;..;((_(O))____ (_(O))

1948 Chevy Truck - Finished SOLD!!

1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021
http://67-72chevytrucks.com/vboard/s...d.php?t=605484

1994 4x4 Blazer - "Field Find"
https://67-72chevytrucks.com/vboard/...ferrerid=30857
youngrodder is offline   Reply With Quote
Old 10-04-2021, 04:35 PM   #757
Russell Ashley
Registered User
 
Russell Ashley's Avatar
 
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,640
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by mr48chev View Post
Fake patina is like some of those psychedelic paint jobs that were a big fad in the 70's. Some stayed around in the 80's without getting sanded off and some got hid out in the barn because the owner while no longer wanting to be seen in the car felt that he had so much money in the paint job that he couldn't sand it off and start over.
I like a truck or car with some natural patina, that shows that it has been used over the years, but I don't think I've ever seen painted-on patina that looked totally real. Maybe I've seen some that was not real but it fooled me, but I don't think so. To me the worst is when clear is sprayed on it to protect the patina, especially if it's gloss clear. Not criticizing anyone's ride. We all have ideas about what we want and like, that's what makes the hobby great.
Russell Ashley is offline   Reply With Quote
Old 10-04-2021, 06:02 PM   #758
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

Doing your own fake patina at home is one thing Paying the "patina king" 10K to paint fake rust on your truck is totally another thing.

Some guy with a 70 something beater sedan sanded most of the paint off and let it sit and rust and proudly shows up with his "patina" car at local shows. It looks like what gets tagged as an abandoned vehicle here in town.

I full and well understand the concept of taking a truck that has what most guys call great patina and building a decent chassis for it and installing a great engine and drivetrain combo and even upgrading the interior while leaving the exterior alone. That might put a truck on the road two or three years earlier than putting the time and finding the money for the body and paint.

I'm at that point of decision right now. Do I continue with my plan for a chopped stretched and sectioned cab on the long bed frame or do I take my cab off the frame and use another cab to do a far simpler build to make a mid July deadline for a show that I have already paid my entry fee and reserved my room for.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-04-2021, 09:43 PM   #759
daveshilling
Senior Member
 
daveshilling's Avatar
 
Join Date: Jan 2013
Location: roseville
Posts: 822
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by mr48chev View Post
\
I full and well understand the concept of taking a truck that has what most guys call great patina and building a decent chassis for it and installing a great engine and drivetrain combo and even upgrading the interior while leaving the exterior alone. That might put a truck on the road two or three years earlier than putting the time and finding the money for the body and paint.
.
If you think people don't paint their patina trucks just to save money, then you definitely don't understand the concept. Myself and others just enjoy the look of a time-worn truck more than paint, and enjoy the freedom of not worrying about maintaining the paint.

Some of us like blondes, some like brunettes. It's okay. Move on.
daveshilling is offline   Reply With Quote
Old 10-05-2021, 12:58 AM   #760
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by youngrodder View Post
Well said... I don't know why it is soo hard for people to understand to keep their opinions to themselves when it is a negative comment. If I see something that I don't like or is not my style, I just keep moving. I see no sense spouting off about it at great length.

Marc
The old Bambi adage is true on forums: If you don't have anything nice to say, then don't say anything at all.
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 10-05-2021, 01:00 AM   #761
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by mr48chev View Post
I'm at that point of decision right now. Do I continue with my plan for a chopped stretched and sectioned cab on the long bed frame or do I take my cab off the frame and use another cab to do a far simpler build to make a mid July deadline for a show that I have already paid my entry fee and reserved my room for.
Stay the course.
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 10-05-2021, 09:35 AM   #762
Rickysnickers
Senior Member

 
Join Date: Oct 2014
Location: Eagle, ID
Posts: 2,917
Re: Post your C/L finds for everyone to enjoy!

Ok, now that we all have that out of your systems, let's move along now.
Rickysnickers is offline   Reply With Quote
Old 10-06-2021, 07:17 PM   #763
Dan in Pasadena
Senior Member

 
Dan in Pasadena's Avatar
 
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,330
Re: Post your C/L finds for everyone to enjoy!

https://losangeles.craigslist.org/sg...390594998.html


https://images.craigslist.org/00j0j_...t2_600x450.jpg
Attached Images
 
__________________
'55 Big Window Shortbed,
Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's

Dan's '55 Big Window "Build" - Well, Kinda!
Dan in Pasadena is offline   Reply With Quote
Old 10-07-2021, 01:49 AM   #764
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

That might be the nicest not really changed from original 58 in the country. Correct valve covers and correct air cleaner and a day of detailing but not over detailing under the hood plus a gentle polish and wax job and you are off to National Chevy truck shows to show in the preserved class.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-07-2021, 08:17 PM   #765
daveshilling
Senior Member
 
daveshilling's Avatar
 
Join Date: Jan 2013
Location: roseville
Posts: 822
Re: Post your C/L finds for everyone to enjoy!

Yeah somebody is telling lies to try and get paid... look at the overspray on the Column mount, painted door latches, and the gray primer near the filler cap side and on the wheel wells. I saw this ad on Instagram too, trying to pass off as a pristine, all-original unpainted truck.
daveshilling is offline   Reply With Quote
Old 10-08-2021, 01:27 AM   #766
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

That is why you don't buy a rig like that sight unseen and it's best to take your buddy or buddies with the critical eyes along. I didn't study the photos in depth last night except for looking for what had to be done in the engine compartment to have it look original .
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-09-2021, 09:47 PM   #767
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: Post your C/L finds for everyone to enjoy!

Quote:
Originally Posted by daveshilling View Post
Yeah somebody is telling lies to try and get paid... look at the overspray on the Column mount, painted door latches, and the gray primer near the filler cap side and on the wheel wells. I saw this ad on Instagram too, trying to pass off as a pristine, all-original unpainted truck.
Well, evidently it already sold because the ad has been deleted.
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 10-09-2021, 10:05 PM   #768
vintovka
Registered User
 
vintovka's Avatar
 
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,771
Re: Post your C/L finds for everyone to enjoy!

Folks are tossing $$$ at anything they think will retain value.
vintovka is offline   Reply With Quote
Old 10-10-2021, 01:59 AM   #769
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

Well asking and actually getting are two different things and the 28 K asking may have brought a high teens cash green offer.

Still that truck had a serious amount of "don't have to spend big money to fix" going on with it and paying a premium should mean that you aren't paying twice as much to a shop to bring it to that condition.

The "one of" is worth some bucks when it hasn't been changed away from original in anything that can't easily be changed back but that means you have to keep it as is outside of putting original pieces back on or you blow the one of out the door. A nice jet black or candy red paint job that cost 10K isn't going to work with the one of thing. Kind of like buying an all original Bandit trans am and painting it red with a brown interior . Or buying an anniversary editon Corvette and making big changes.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-11-2021, 03:09 PM   #770
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

A pretty decent looking GMC hood and pair of AD fenders in this add. Items appear to be near Tieton WA. https://yakima.craigslist.org/pts/d/...389757136.html

The left front fender for A TF looks worth the drive if it works for someone close enough.
Attached Images
 
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-18-2021, 06:01 AM   #771
57NAPCO
F’B’D guy
 
57NAPCO's Avatar
 
Join Date: Feb 2004
Location: Texas/Maine
Posts: 2,204
Re: Post your C/L finds for everyone to enjoy!

This is a very very nice 55, last year of the Advanced Design Series. (First Series 1955) $21,500

I’d love to own this fella but I have a 1950 one ton Panel waiting on me to get running


1955 Chevy Panel - $1 (freeport)

https://maine.craigslist.org/cto/d/f...395102958.html
57NAPCO is offline   Reply With Quote
Old 10-19-2021, 05:59 PM   #772
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

That is one solid looking truck. A bit on the spendy side but you wouldn't have to do a thing to it for years except general maintenance if you didn't want to.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 10-21-2021, 03:00 PM   #773
daveshilling
Senior Member
 
daveshilling's Avatar
 
Join Date: Jan 2013
Location: roseville
Posts: 822
Re: Post your C/L finds for everyone to enjoy!

A VERY good looking Suburban body. Patina could probably be matched...I'm not usually a fan, but I would drive this bad boy:

https://eastidaho.craigslist.org/pts...380506168.html
Attached Images
 

Last edited by daveshilling; 10-21-2021 at 03:05 PM.
daveshilling is offline   Reply With Quote
Old 10-21-2021, 03:07 PM   #774
daveshilling
Senior Member
 
daveshilling's Avatar
 
Join Date: Jan 2013
Location: roseville
Posts: 822
Re: Post your C/L finds for everyone to enjoy!

Nice Patina on this chevy 3600
https://omaha.craigslist.org/cto/d/m...385875820.html
Attached Images
 
daveshilling is offline   Reply With Quote
Old 10-22-2021, 09:29 PM   #775
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: Post your C/L finds for everyone to enjoy!

Name:  EW shop.jpg
Views: 242
Size:  56.2 KBNot a truck but plenty of room to play with your truck, room to run a business and living quarters upstairs. ON FB market place in East Wenatchee Wa right acrosss the street from the airport. https://www.facebook.com/marketplace...22337280%22%7D
Attached Images
 
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com