My Facetruck thread. - Page 125 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4u2nv · 07-18-2021, 06:34 AM

Quote:

Originally Posted by 4u2nv

I can picture you doing this to impress the girls: lol

Poor 2 guys at the end , I don't think he's going to clear them !!!

**special-K** · 07-18-2021, 07:56 AM

Paul and his buddies

Jumping Bicycles in the 70's - YouTube

StingRay Jumps - YouTube

kingsolver72 · 07-18-2021, 01:50 PM

These pictures of bicycles reminds me when I went to Cottonwood Falls about 3 or 4 weeks ago. I saw a fella that had a Penny-Farthing bicycle. If you did an endo on one of these could possibly end your life.

**special-K** · 07-19-2021, 06:02 AM

I love old bicycles but never had interest in those! They call the bikes we know that came after those, the ones with same size tires and a chain to the rear wheel, "safety cycles". Get why?

89AKurt · 07-19-2021, 11:48 AM

Quote:

Originally Posted by FleetsidePaul

A Raleigh Chopper. I wanted one so bad as a kid. And those handlebars are definitely aftermarket. The Chopper came with ape hanger type bars.

special-k told me this thread is talking about muscle bicycles! My parents got me this, wiped out the first day on sand that washed onto the street (bent handlebar). After looking at the picture, remember the chain guard was removed because I tore pants. I lived in Tucson, rode it like a BMX bike, the parallelogram frame collapsed after a few jumps. One time I crashed, was knocked senseless, managed to walk back home but didn't know my name.

I worked a short stint at a bike shop in the early 80s. Someone brought this in, asking about fixing the bent gooseneck. The owner gave a quote, the guy flinched, I asked to buy it, SOLD! It's rideable enough, did a 4th of July parade with the bike club. Then hung in the rafters of my shop, where it's been about 35 years. Almost hurt myself getting it down yesterday, weighs a ton! Cleaned and lubed, but need to replace the brake cables, and see if the bike shop can get the 3 speed to shift, seems to be stuck in 3rd. Made the chain-guard from a scavenged stove door, hardly a replica, but it's not worth restoring.

Found a good location to take lots of pictures. LOL

I looked at Flickr for pictures, noticed my model with 5 speed and high sissy bar is really rare. Figures, story of my life. At least this one is a Mk1, probably 1970. In Ireland they have rallies where people do group rides. This bike saved Raleigh from bankruptcy. The safety was questioned in Parliament. There are museums with them on display. I never knew......

Anyway, now that I'm in the Fakebook klink for 30 days, I'll be on this forum more often.

**special-K** · 07-24-2021, 07:54 PM

Facebook clink? You should be ashamed, you outcast!

**davischevy** · 07-25-2021, 09:12 AM

Quote:

Originally Posted by 89AKurt

special-k told me this thread is talking about muscle bicycles! My parents got me this, wiped out the first day on sand that washed onto the street (bent handlebar). After looking at the picture, remember the chain guard was removed because I tore pants. I lived in Tucson, rode it like a BMX bike, the parallelogram frame collapsed after a few jumps. One time I crashed, was knocked senseless, managed to walk back home but didn't know my name.

I worked a short stint at a bike shop in the early 80s. Someone brought this in, asking about fixing the bent gooseneck. The owner gave a quote, the guy flinched, I asked to buy it, SOLD! It's rideable enough, did a 4th of July parade with the bike club. Then hung in the rafters of my shop, where it's been about 35 years. Almost hurt myself getting it down yesterday, weighs a ton! Cleaned and lubed, but need to replace the brake cables, and see if the bike shop can get the 3 speed to shift, seems to be stuck in 3rd. Made the chain-guard from a scavenged stove door, hardly a replica, but it's not worth restoring.

Found a good location to take lots of pictures. LOL

I looked at Flickr for pictures, noticed my model with 5 speed and high sissy bar is really rare. Figures, story of my life. At least this one is a Mk1, probably 1970. In Ireland they have rallies where people do group rides. This bike saved Raleigh from bankruptcy. The safety was questioned in Parliament. There are museums with them on display. I never knew......

Anyway, now that I'm in the Fakebook klink for 30 days, I'll be on this forum more often.

If you are in FB clink, I'm sure we could be friends. 😁

**davischevy** · 07-25-2021, 09:19 AM

We took a drive over to Yellville, AR to eat BBQ yesterday. Our 16 year old granddaughter drives the Ochre K10. We caused quite a stir at the restaurant.

**Ol Blue K20** · 07-25-2021, 10:08 AM

Quote:

Originally Posted by davischevy

We took a drive over to Yellville, AR to eat BBQ yesterday. Our 16 year old granddaughter drives the Ochre K10. We caused quite a stir at the restaurant.

I'm jealous.....

**special-K** · 07-25-2021, 11:42 AM

Quote:

Originally Posted by davischevy

... We caused quite a stir at the restaurant.

I bet you did. A mobile classic Chevy Truck show. I've been thinking about taking a drive for BBQ all weekend. Now I have to go

**72 tigger** · 07-25-2021, 05:16 PM

Quote:

Originally Posted by davischevy

We took a drive over to Yellville, AR to eat BBQ yesterday. Our 16 year old granddaughter drives the Ochre K10. We caused quite a stir at the restaurant.

Good looking group Larry!

**72 tigger** · 07-25-2021, 05:19 PM

Trying to think of a caption….
“Do you know how to weld?”

**Getter-Done** · 07-25-2021, 05:43 PM

Quote:

Originally Posted by 72 tigger

Trying to think of a caption….
“Do you know how to weld?”

Do you know where we can get a gas tank?

..

**Steeveedee** · 07-25-2021, 05:50 PM

Reminds me of one of my friends who took a 360 out of a wrecked (Suzuki?) motorcycle and put it in a Moped frame. Took off down the street and the throttle cable stuck. He ended up running behind it until it fell over.

HE came out of it unscratched!

**davischevy** · 07-25-2021, 08:20 PM

Quote:

Originally Posted by 72 tigger

Trying to think of a caption….
“Do you know how to weld?”

What could possibly go wrong?

kingsolver72 · 07-25-2021, 08:59 PM

Quote:

Originally Posted by 72 tigger

Trying to think of a caption….
“Do you know how to weld?”

“Custer took a chance”

LT7A · 07-25-2021, 09:44 PM

Quote:

Originally Posted by Steeveedee

Reminds me of one of my friends who took a 360 out of a wrecked (Suzuki?) motorcycle and put it in a Moped frame. Took off down the street and the throttle cable stuck. He ended up running behind it until it fell over.

HE came out of it unscratched!

I was doing some reading on nitrous systems. Author told about a guy who put a 50 HP system on a motorcycle and used a toggle switch instead of a momentary switch. Once he hit the nitrous, he couldn't get his hand back over to shut it down because it was pulling too hard. Rode it as long as he could and then bailed.

**Steeveedee** · 07-25-2021, 09:57 PM

Quote:

Originally Posted by LT7A

I was doing some reading on nitrous systems. Author told about a guy who put a 50 HP system on a motorcycle and used a toggle switch instead of a momentary switch. Once he hit the nitrous, he couldn't get his hand back over to shut it down because it was pulling too hard. Rode it as long as he could and then bailed.

Yeah, that stuff happens. I recall that I posted here about riding a 350 Kawasaki triple and just barely being able to get the throttle closed while hanging off it like an ape in a tree before hitting a chain link fence! (Didn't hit that fence, but it was a close call) At least I didn't have to bail, but that was just pure dumb luck, on my part.

57taskforce · 07-25-2021, 11:58 PM

Quote:

Originally Posted by Steeveedee

Yeah, that stuff happens. I recall that I posted here about riding a 350 Kawasaki triple and just barely being able to get the throttle closed while hanging off it like an ape in a tree before hitting a chain link fence! (Didn't hit that fence, but it was a close call) At least I didn't have to bail, but that was just pure dumb luck, on my part.

That right there is what us younger generations call whiskey throttle. It’s always funny when it happens to someone else but sucks royally when it happens to you

4u2nv · 07-26-2021, 06:28 AM

Quote:

Originally Posted by 72 tigger

Trying to think of a caption….
“Do you know how to weld?”

I'm not getting on it, we'll get your sister to try it !!!!

kingsolver72 · 07-26-2021, 12:04 PM

Quote:

Originally Posted by 4u2nv

I'm not getting on it, we'll get your sister to try it !!!!

I thought you were going to bring the duct tape????

**davischevy** · 07-26-2021, 03:14 PM

Go get Mikey.

Killer Bee · 07-30-2021, 12:28 AM

complete with flat bed ford

LT7A · 07-30-2021, 05:31 AM

Quote:

Originally Posted by Killer Bee

complete with flat bed ford

"There's a girl my Lord..."

Make her smile. Count her teeth.

**special-K** · 07-30-2021, 05:47 AM

Where's the girl? Or her daughter!

Cool flatbed Ford

Did you see any Raleigh Choppers or Schwinn Sting Rays?

07-18-2021, 01:50 PM	#3103
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,199	Re: My Facetruck thread. These pictures of bicycles reminds me when I went to Cottonwood Falls about 3 or 4 weeks ago. I saw a fella that had a Penny-Farthing bicycle. If you did an endo on one of these could possibly end your life. Attached Images __________________ Fight the good fight, finish the race, keep the faith

07-19-2021, 06:02 AM	#3104
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. I love old bicycles but never had interest in those! They call the bikes we know that came after those, the ones with same size tires and a chain to the rear wheel, "safety cycles". Get why? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2021, 07:54 PM	#3106
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. Facebook clink? You should be ashamed, you outcast! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-25-2021, 09:19 AM	#3108
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: My Facetruck thread. We took a drive over to Yellville, AR to eat BBQ yesterday. Our 16 year old granddaughter drives the Ochre K10. We caused quite a stir at the restaurant. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

07-25-2021, 05:19 PM	#3112
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,206	Re: My Facetruck thread. Trying to think of a caption…. “Do you know how to weld?” Attached Images __________________ 71 C10 72 K20 72 K10 Super Kirk

07-25-2021, 05:50 PM	#3114
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,086	Re: My Facetruck thread. Reminds me of one of my friends who took a 360 out of a wrecked (Suzuki?) motorcycle and put it in a Moped frame. Took off down the street and the throttle cable stuck. He ended up running behind it until it fell over. HE came out of it unscratched! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

07-26-2021, 03:14 PM	#3122
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: My Facetruck thread. Go get Mikey. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

07-30-2021, 12:28 AM	#3123
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,726	Re: My Facetruck thread. complete with flat bed ford __________________ *I started out with nothing - and I still have most of it*

07-30-2021, 05:47 AM	#3125
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: My Facetruck thread. Where's the girl? Or her daughter! Cool flatbed Ford Did you see any Raleigh Choppers or Schwinn Sting Rays? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-31-2021 at 06:13 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.