The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-28-2012, 04:50 PM   #1
rfmaster
Registered User
 
rfmaster's Avatar
 
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
Delphi Connector part number

Hey guys.

I am trying to find a part number for a matching connector body for a fuel pressure sender ACDelco# 13500744. This sender is used on a number of GM trucks and SUV's - in my case 2007 Silverado with 5.3L engine. So far a visit to a dealer parts counter yielded nothing - parts guy tried several pig tail assemblies PTxxxx which did not match actual unit. This is a plug view of the sensor:



So far my research points toward Delphi GT 150 series of connectors using 4.5mm center-line with 1.5mm contact width. It is a 3-way female connector. Search of Delphi online catalog yielded no suitable candidates.

I could really use help from experienced parts guy! Thanks in advance.

//RF
__________________
"The Beast"

1975 Chevrolet C20 longbed
350/700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
rfmaster is offline   Reply With Quote
Old 06-28-2012, 06:35 PM   #2
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,952
Re: Delphi Connector part number

I dont know if your aware this exists but give it a shot. http://www.acdelco.com/parts/wire-an...r-connections/ . Its a listing of all pig tails for everything and supplies and ac-delco number. I learned about the site at a power steering seminar put on by ac-delco. BTW thats a male end connector.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Old 06-28-2012, 08:05 PM   #3
rfmaster
Registered User
 
rfmaster's Avatar
 
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
Re: Delphi Connector part number

CableGuy0

Thank you very much for the link - I think I found it!!!

CONNECTOR,SEN-FUEL PRESS
Part Number: PT2391 (19168035)
Product Notes:
Fuel Pressure Sensor Conn

PT2391


//RF
__________________
"The Beast"

1975 Chevrolet C20 longbed
350/700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
rfmaster is offline   Reply With Quote
Old 06-28-2012, 08:06 PM   #4
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,952
Re: Delphi Connector part number

Theres a ton of other info on that site too. Also has other manufacturers plugs and stuff too. I couldnt believe that info was available for free when the guy doing the seminar showed us all. Glad to help.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Reply

Bookmarks

Tags
connector, delphi

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:29 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com