The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Tools, Shops and Shop Safety


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-14-2021, 07:17 PM   #1
Senior Member

Join Date: Oct 2014
Location: Eagle, ID
Posts: 1,582
My shop

I have been following along as some of you all have built your shops. Well, I purchased my steel shop building in October and it arrived in February. I started the permit process last June and got final approval a week ago. As a side note, I had to get a "variance permit" because the location of the shop is in the "front yard." It's not anywhere near the front yard, but where it's located it breaks the plane of the front of the house. The county I live in has not been very helpful and the amount of red tape I went through, I thought I was still in CA.

I digress. I'm excited. I will still be a while before the actual building and slab all get going, as I'm on a waiting list for the contractor. It's ok though, at least now the construction beginning is in sight.

For those interested, I went with a 40'x60'x14' steel building. It's going to house my hot rod and will also be my woodshop. I plan to get back into that as well, since I'm now a retired person.
Rickysnickers is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 08:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020