The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Past Contest Winners > 2015 ToTM Archive

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 03-17-2015, 07:50 PM   #1
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,542
Arrow April 2015 ToTM

Well, you have all been waiting for this contest. This month we will compile and honor those that set the basis for our truck’n world. The theme of this month’s TOTM is

Do you really DRIVE that?

As you can probably guess, the theme for this month will be our less than perfect specimens; our beaters, our beasts, our rust-buckets, our TRUCKS. Now here are the rules or criteria for the vehicles

To be an eligible beater:
  • Open to all years and models of Trucks, Blazers, Suburbans, Tahoes, Yukons, and Jimmys.
  • The nominee must be a board member and the current owner of the truck.
  • It must be road worthy and currently legal (until the cops catch you) to be on the road.
  • It must have an unmatching paint scheme (no all primers)
  • It must have at least three other distinctly viewable issues. This includes things like:
    o Missing panels
    o Dents and Holes (large and small)
    o Dominate rust formations (not patina)
    o Anything that might make someone afraid to go near it for fear of catching some sort of disease
  • If a truck was selected as a 2014 or 2015 TOTM winner then you are ineligible. If the truck was nominated but not selected as a TOTM winner then it may be nominated and compete in this month's category.

To Nominate:

You or someone else may nominate the vehicle. The nominee must be a board member and the current owner of the truck. Once you decide on who you wish to nominate, just add your nomination to this thread. We will need two pictures minimum (at least one full view of the vehicle) with/for the nomination as well as the owner’s board name, and the Make/Model/Year of vehicle.

Nominees will run through March 24. The first 15 nominees that meet the criteria will participate in the contest. I will PM the nominees to get any additional data or pictures if they have not already been provided. If the owner has a preferred picture they want used in the contest, please let me know in a PM. You can PM me for an e-mail address in case anyone has problems resizing the pictures for the board. A Poll Thread will be set up by March 25 in this board area and an announcement will be posted on the Discussion Boards to notify all that voting has begun. The Poll will run thru the morning of April 1 and the official announcement of the winner will be on the evening of April 1. The announcement of the TOTM winner will be posted through the General Discussion Board area.
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is online now  
Old 03-17-2015, 11:03 PM   #2
Tropical Snowstorm
Lurky lurky
 
Tropical Snowstorm's Avatar
 
Join Date: Sep 2005
Location: Maryville, TN
Posts: 553
Re: April 2015 ToTM

Haha, finally eligible... I'll throw my poor long term project in the ring. 72 Cheyenne Super that looked a lot better than it was when it followed me home in 2008. 4 years in outdoor storage while I'll traveled and the bondo started cracking and showing what lurked underneath. Replaced the bed and have started what will be a very slow 2 kid having budget build

As it sits, ugly but cranks up first try every time!


Swapping the bed, corners and rockers are next:



The saving grace keeping this thing from being parted, great running 350 crate engine and TH350 trans. If I could swing the gas I'd drive it anywhere:
Tropical Snowstorm is offline  
Old 03-17-2015, 11:48 PM   #3
iluvmy72
Registered User
 
Join Date: Jan 2002
Location: Springville, UT, USA
Posts: 1,010
Re: April 2015 ToTM

one sec while i dip my truck in the great salt lake
iluvmy72 is offline  
Old 03-17-2015, 11:49 PM   #4
TJ's Chevy
Post Whore
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: April 2015 ToTM

I'm finally able to participate as well. lol my name is Tom McCauley and this is my 1964 GMC C1500. 305E V6. SM420. 2 wheel drive. Long wheel base. Yes...she's a farm truck. Her name is "Crustine."
Attached Images
   
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline  
Old 03-18-2015, 12:22 AM   #5
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,487
Talking Re: April 2015 ToTM

Quote:
Originally Posted by TJ's Chevy View Post
Her name is "Crustine."
Classic!!
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline  
Old 03-18-2015, 09:36 AM   #6
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: April 2015 ToTM

Here's my truck "Cecil" he's crusty and rusty on the "Outside" with scratches, rust, dents, and 125 year old barn wood for a bed. But underneath and inside he is lean and mean: S10 chasis, 5.7 TPI motor, 18x8s up front and mini tubbed 20x10s in the back, power windows, power locks and AC!
Attached Images
     
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline  
Old 03-18-2015, 10:44 AM   #7
Matt Cramer
Registered User
 
Join Date: Apr 2012
Location: Covington, GA
Posts: 386
Re: April 2015 ToTM

Ooh, this one looks like one my truck is perfect for.

Matt Cramer,1972 Chevy C10 long bed

This truck is a complete beater with a surprise twist under the hood.
Attached Images
   
__________________
Matt Cramer
1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD
4.8 LS build thread
Matt Cramer is offline  
Old 03-18-2015, 11:39 AM   #8
oossuuu754
Registered User
 
oossuuu754's Avatar
 
Join Date: Jul 2014
Location: Yukon, OK
Posts: 395
Re: April 2015 ToTM

Quote:
Originally Posted by oossuuu754 View Post
Here's my truck "Cecil" he's crusty and rusty on the "Outside" with scratches, rust, dents, and 125 year old barn wood for a bed. But underneath and inside he is lean and mean: S10 chasis, 5.7 TPI motor, 18x8s up front and mini tubbed 20x10s in the back, power windows, power locks and AC!
Oh by the way Cecil is a 1953 - 3100 5 window on 83 S10 chassis, with a 1987 5.7 TPI motor.
__________________
---Shawn

Cecil-1953 5 window build thread

Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189
oossuuu754 is offline  
Old 03-18-2015, 02:02 PM   #9
JGood
Registered User
 
JGood's Avatar
 
Join Date: Feb 2011
Location: Provost, Alberta, Canada
Posts: 68
Re: April 2015 ToTM

1986 GMC Wrangler350/350 2 wheel drive turned 1986 Chevy!
Attached Images
     
__________________
1986 Chevy Silverado LWB (project)
1967 Chevy SBSS (future project)
2003 Chevy Tahoe (wifes daily)
2004 GMC 2500 Duramax (company truck)

1986 GMC Wrangler LWB (newly acquired beater)
JGood is offline  
Old 03-18-2015, 03:11 PM   #10
gerfunken
Registered User
 
gerfunken's Avatar
 
Join Date: Feb 2009
Location: Surprise, AZ
Posts: 490
Re: April 2015 ToTM

I’ll go ahead and throw mine into the mix. Might as well, it’s probably the most appropriate category for mine to fall into right now.









And for proof that I do indeed drive it….




Followed by a quick glamor shot at the gas station after the engine was done, and before the bed was put back on.

__________________
-Scott

1972 Chevy K20
Picture Gallery
Build Thread

1930 Chevy AD
Picture Gallery

1929 Ford Model-A
Picture Gallery

1975 Triumph TR-6
Picture Gallery

Last edited by gerfunken; 03-18-2015 at 11:04 PM. Reason: resizing the images
gerfunken is offline  
Old 03-18-2015, 09:11 PM   #11
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: April 2015 ToTM

ha. this is one i will play in.







super beater. rust, check. multi colored, check. dents, check. missing panels, check. its my current daily driver and averages about 12k a year in work commute. perhaps a bit more. at no point has it stranded me. turn key, make bad smell, go down road. i cant tell if the stares are in admiration, or disbelief...HA
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline  
Old 03-18-2015, 10:19 PM   #12
vancelot69
Registered User
 
vancelot69's Avatar
 
Join Date: Jul 2014
Location: Lakewood, Co.
Posts: 219
Re: April 2015 ToTM

Shoot, I'll throw my hat in the ring!

NOTE: I just noticed that the qualifications said "unmatching paint scheme" which mine doesn't really. The only thing that could come close is the rockers and fender wells painted with what looks like POR black, and one section of the drivers side rear quarter looks silver in a certain light. If this disqualifies me, ahh well, c'est la vie, but I will leave my hat (and truck) here just in case I squeak in!

1st pic is the full view. You can see the bent grille, the driver's side bumper signal is missing, luckily the grille signals work. Both front and rear bumpers are "loose" in so much as if you push down on one side, the other side will rise. It is full of rust, way more than I had hoped for when I bought it, unfortunately. I think you can make out some rust patches on the drivers side rocker, the front part of the rear quarter, and the top rear part of the wheel opening part of the fender in this pic.

2nd pic is the drivers side rocker and front part of the rear quarter. Of note, when the drivers side door is open, the rear quarter can be moved by hand. The passengers side is solid and doesn't move when the door is open.

3rd pic is one of the rearward cross members at the frame mounting point. The rust is layering the metal at that point.

4th pic is the front drivers side lower shock mount. See how the nut isn't tightened all the way? The drivers side rear shock is worse! Worst part about that one, I'm not sure if, even if I get new shocks, if I can tighten the bolt enough without it pulling through the mount. I have a video of how loose it is, if it's possible to post videos!

5th pic is the passenger side rocker box.

Another thing to note, the rear drive shaft started wobbling a few months ago, so I pulled it, and when I went to press the u-joints out, the one on the front, where the slip joint is, that connects to the transfer case, the fitting was out of round so I couldn't press it out. So it's sat for several weeks, and when I get a wild hair up my butt, I drive it in "front wheel drive mode" without the rear shaft installed.
Attached Images
     
__________________
My toys:
1971 GMC Jimmy
2008 Hummer H3 Adventure
2003 HD Road King
vancelot69 is offline  
Old 03-19-2015, 10:55 AM   #13
Rambow
Registered User
 
Rambow's Avatar
 
Join Date: Nov 2013
Location: Mill Creek, WA
Posts: 72
Re: April 2015 ToTM

Here's my entry... our '53

pulled out of a 22year slumber in oregon last spring:




The trip to go get it cost more than the truck did, but we got it home...


After a few months... Fired up and drove it again!(my 6 year old camera man was awesome!)

https://www.youtube.com/watch?v=4L5iKTQcIyc



Here we are, a year later(actually this weekend is exactly a year) its now running, driving and registered & insured!







Thanks for your consideration!
__________________
_____________________________________
Ben R.
1953 Chevy 3100
Classic Seat Restorations -Preventing me from working on my own projects since 2009!

Last edited by Rambow; 03-19-2015 at 11:20 AM. Reason: trying to make my youtube vid work
Rambow is offline  
Old 03-23-2015, 03:40 PM   #14
truckfan
Senior Member
 
truckfan's Avatar
 
Join Date: Apr 2009
Location: Lawrence KS
Posts: 821
Re: April 2015 ToTM

1976 SWB patina shop truck project. 250 L6, no power nothing. new interior. CLRing the outside. leaving it rough.
Attached Images
  
__________________
1981 Chevy C30 440 Holmes 42K one owner miles
truckfan is offline  
Old 03-23-2015, 09:09 PM   #15
Vintage Windmills
Vintage 4x4s
 
Vintage Windmills's Avatar
 
Join Date: Sep 2010
Location: Prior Lake, MN
Posts: 4,305
Re: April 2015 ToTM

Room for another?
1971 K20, currently running on 7 cylinders with some holes in the floor. But, its got disc brakes on all four corners and an amazing heater! Its come a long way. 1st 3 pics are when I got it, last 2 are how it is today.
Attached Images
     
__________________

67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades)
67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore )
86 CHV K30 502 th400, apple red NEW
71 CHV K20 350 SM465, ochre (saved work truck)
71 CHV K20 292 SM465, white, tach, PTO, (future project)
72 CHV K20 350 350th, medium blue (project stocker)
01 CHV K2500hd crew, indigo blue

^3 dont run and the others don't see winter either
'86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649
'71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642
'72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6
Vintage Windmills is offline  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com