66 Power Brake Booster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 08-31-2005, 03:24 PM

My truck has manual brakes now are there any roadblocks to putting a 66 stock booster on a 66 C10? I noticed that the stock booster has 4 holes for mounting and my truck has only 2 studs now for the master cylinder.
thanks

64fleetside · 08-31-2005, 05:17 PM

Its a bolt in but you need the brackets, there is an aluminum bracket thqt bolts to the firewall & also a steel bracket w/a lever setup. Brian

zenish · 09-01-2005, 09:36 PM

where did you find a 66 booster?i need one.

**dennislbrooks** · 09-02-2005, 07:06 AM

Oreilly's Auto Parts is one place

A1 Cardone p/n 50-3537

**dennislbrooks** · 09-04-2005, 02:09 PM

Well, the mounting brackets came with the 66 booster but not the linkage. Sure is fun to make this stuff--be nicer if it works. I fabricated the linkage--still need a couple of pins and finish the rod to brake arm.

Does it look close as my 67 has a fabricated/converted 79 booster?

Also 3rd pic is one of my finished rear disc mounts ---would fit bothe a 66 and 67 and others. The unknowns about the rear disc is hooking up the emergency brake cable on the 83 camaro rear calipers. Flex lines are coming and will weld a mount when it is assembled. I will pull both axles and have the flanges turnrd down to accept the 88 4wd front rotors concentric hole.

The reason I am on the 66 message board as I have a 67 and my friend has a 66 I work on. Nice to see which parts are interchangeable.

All your guys constructive input is appreciated.

**dennislbrooks** · 09-05-2005, 04:27 PM

Finished 66 booster with a 72 mc

08-31-2005, 03:24 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	66 Power Brake Booster My truck has manual brakes now are there any roadblocks to putting a 66 stock booster on a 66 C10? I noticed that the stock booster has 4 holes for mounting and my truck has only 2 studs now for the master cylinder. thanks Last edited by dennislbrooks; 08-31-2005 at 05:46 PM. Reason: bad english

09-01-2005, 09:36 PM	#3
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	where did you find a 66 booster?i need one. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

09-02-2005, 07:06 AM	#4
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	66 booster Oreilly's Auto Parts is one place A1 Cardone p/n 50-3537

09-04-2005, 02:09 PM	#5
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	66 booster linkage Well, the mounting brackets came with the 66 booster but not the linkage. Sure is fun to make this stuff--be nicer if it works. I fabricated the linkage--still need a couple of pins and finish the rod to brake arm. Does it look close as my 67 has a fabricated/converted 79 booster? Also 3rd pic is one of my finished rear disc mounts ---would fit bothe a 66 and 67 and others. The unknowns about the rear disc is hooking up the emergency brake cable on the 83 camaro rear calipers. Flex lines are coming and will weld a mount when it is assembled. I will pull both axles and have the flanges turnrd down to accept the 88 4wd front rotors concentric hole. The reason I am on the 66 message board as I have a 67 and my friend has a 66 I work on. Nice to see which parts are interchangeable. All your guys constructive input is appreciated. Attached Images

09-05-2005, 04:27 PM	#6
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,766	2 more pics Finished 66 booster with a 72 mc Attached Images

08-31-2005, 05:17 PM	#2
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Its a bolt in but you need the brackets, there is an aluminum bracket thqt bolts to the firewall & also a steel bracket w/a lever setup. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.