The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-03-2002, 01:15 PM   #1
72ChevyCheyenne
Registered User
 
72ChevyCheyenne's Avatar
 
Join Date: May 2002
Location: Woodstock, GA USA
Posts: 300
Aftermarket AC Kits

I'm getting ready to start the frame off resto and I want to add AC. Has anyone used the kits from Vintage Air or Arizona Mobile Air? Which is best? Any and all input would be greatly appreciated.
__________________
Bill Durham
http://home.attbi.com/~bulldurham
72 Cheyenne
Restoration in progress
Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.
72ChevyCheyenne is offline   Reply With Quote
Old 07-03-2002, 01:29 PM   #2
72ChevyCheyenne
Registered User
 
72ChevyCheyenne's Avatar
 
Join Date: May 2002
Location: Woodstock, GA USA
Posts: 300
Aftermarket AC Kits

I'm getting ready to start the frame off resto and I want to add AC. Has anyone used the kits from Vintage Air or Arizona Mobile Air? Which is best? Any and all input would be greatly appreciated.
__________________
Bill Durham
http://home.attbi.com/~bulldurham
72 Cheyenne
Restoration in progress
Currently: frame sand blasted and powdercoated, Inline Tube brake and fuel lines, Blazer tank in rear, Holley Red electronic fuel pump, Eaton posi with 3.42 gears, 2 1/2" drop front spindles, 4" drop rear springs with adjustable panhard bar, KYB shocks, ZZ 502/502 GM Performance crate engine, Zoops brackets and pulleys, Vintage Air, dual electric fans, Ram Air II hood and late model sport side bed.
72ChevyCheyenne is offline   Reply With Quote
Old 07-03-2002, 02:10 PM   #3
Blue68
Registered User
 
Blue68's Avatar
 
Join Date: Apr 2000
Location: Frisco, Tx, USA
Posts: 606
Used Vintage air. Very happy. You will be challenged to seal up the air leaks on these old beasts if you want to keep your cool in the truck though. I found that at highway speeds I didn't stay real cool even though the air from the vent was frigid. At slower speeds I was good.

Only complaint I had was the Sanden compressor was a little noisy for my taste. The Vintage Air tech said it was the same on his new Honda Accord. So now I have an oem compress i'm going to try running out of a '98 truck, but I didn't swap engines just for a new compressor.
__________________
http://home.comcast.net/~r.landrum/w...tos.html-.html

'68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.
Blue68 is offline   Reply With Quote
Old 07-03-2002, 02:33 PM   #4
DennyB
Led Sled! Discs R 4 ME!
 
DennyB's Avatar
 
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
Also look into "Old Air" units.
Great product & Customer service.
__________________
"Never ride faster than your Angel can fly"
I.M.O.M,W,J&C
Patriot Guard Rider
DennyB is offline   Reply With Quote
Old 07-03-2002, 04:27 PM   #5
Frank_Zeller
Registered User
 
Frank_Zeller's Avatar
 
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
Got the Old Air setup....took some tweaking to get it right. Some my falt Happy with it now. You must fix all the air leaks and add lots of insulation. I still have not found all the air leaks even with all new weather stripping and silicone the vent windows. Have pics of the installation if you’re interested. Call old air and they will send you a catalog I mounted the compressor cycle temp switch where the lighter was. This allows me to change the vent temp from 60 to 38 F.

Pros
Old Air did not charge me until they shipped
Cold vent air
Pretty straightforward install
Compressor and bracket low profile
Blower pulls though the evaporator (vintage air pushs the air thought) this might make it quiter?
Has full size condenser in front (vintage air one is about a 1/3 smaller)

Cons
Compressor a little noisy above 2500 rpm
Blower makes some noise
Center vent only has one feed in.....factory has 2.
__________________
69 SWB C/10 5-6 drop 700R4
69 Firebird Convert 455 4 spd
70 Torino GT Convert

Austin-Texas
Frank_Zeller is offline   Reply With Quote
Old 07-04-2002, 04:35 PM   #6
GMCjunkie
Dude...I'm a CHICK
 
GMCjunkie's Avatar
 
Join Date: Jul 2000
Location: Lakeland Georgia
Posts: 6,192
JUST dropped my Burb off to have the under dash a/c installed, goin with the AMA setup. We leave for Ga next Monday, (7/15) THAT my friend will be a true test of an a/c unit!!!!
__________________
~*~*~*~*~*~*~*~*~*~*~*~*~*
"The unexamined life is not worth living" -Socrates
~*~*~*~*~*~*~*~*~*~*~*~*~*

'71 GMC Suburban 4x4
GMCjunkie is offline   Reply With Quote
Old 07-04-2002, 04:48 PM   #7
nroden
Registered User
 
nroden's Avatar
 
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
Here you all all have aftermarket setups and my stock 1972 AC still runs. It hasn't been put to the test yet going down the highway because I haven't had it on the highway during the summer. It does cool though sitting.
__________________
Nick Rodenberg
72 Cheyenne 10 V8 350/TH350
white/ochre/white/ochre, ochre/saddle interior
Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!!
nroden is offline   Reply With Quote
Old 07-06-2002, 07:04 PM   #8
jlmtrout
Registered User
 
Join Date: Jul 2002
Location: Memphis, Tn
Posts: 194
I'm very happy with Old Air. Everyone is right about air leaks and insulation. Very cold air out of ducts. Once you get rid of the hot air in the cab, it'll keep you comfortable. Also, consider the R-134. You can buy it over the counter and is ozone friendly. Not too difficult to install, hardest part is cutting holes in the dash for the vents, and will clean up your firewall by eliminating the "doghouse". Good luck and keep on truckin'!---------Jerry
jlmtrout is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com