|
10-24-2021, 07:53 PM
|
#1 |
|
Registered User
Join Date: Dec 2019
Location: Stevensville Md.
Posts: 116
|
Spindle out
So I’m putting disc brakes on my seventy. I have a 72 donor axle but I don’t want to switch them out because it has factory front posi and I took off the diff cover today and it has 3:73. That’s perfect because I’m putting a 14 bolt with the same in the rear. So. Does anyone have a parts list for absolutely everything from the spindle out that I will need? I’ve heard there are a few differences. Thanks
|
|
|
|
10-28-2021, 12:42 AM
|
#2 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,387
|
Re: Spindle out
Steering knuckles out plus the inner and outer shafts from the 72
|
|
|
|
|
10-28-2021, 07:38 AM
|
#3 |
|
Registered User
Join Date: Dec 2019
Location: Stevensville Md.
Posts: 116
|
Re: Spindle out
OK. So I do need the inner shafts? Perfect. I got one side broken down. Looks pretty simple. Thanks
|
|
|
|
|
10-28-2021, 11:34 AM
|
#4 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,387
|
Re: Spindle out
There is a chance that the 72 has the larger axle shaft u joint. So at that point it is just easier to slide the whole thing out and into the other. But you have to swap the knuckles and everything out. 1970 was the first year of open knuckle and last year of drum. The knuckle/spindle studs are clocked differently than the disc brake pattern starting at 12 o'clock
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
