FS LWB rolling chassis with bed $25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy_fatman · 08-18-2003, 10:57 PM

I have had this for a while and it's time for it to go, NO TITLE I'm asking $25 for it since the local scrap yard will give me some 35 bucks for it but I tought that someone here might use some of this instead of me scraping it.

Here's some pics of it, tires DON'T COME WITH IT, they're not mine.

Fatman.

edit@ picture removed

chevy_fatman · 08-18-2003, 10:58 PM

Another side.

edit@ picture removed

**ScottH** · 08-18-2003, 11:25 PM

Hey that looks familar! Good a/c dash for somebody.......

cableguy0 · 08-19-2003, 12:31 AM

is that a wood or metal floor and can u post more pics of the bed

ZOOMY · 08-19-2003, 12:47 AM

That would be a keeper here in the salt belt.

chevy_fatman · 08-19-2003, 10:31 AM

Quote:

Originally posted by ScottH
Hey that looks familar!

That was yours Scott!

A/C dash has been removed already.

Cableguy, the bed has a metal floor, I know that it has a few holes thru in the bed and some at the very back end close to where the tailgate would be, the bedsides would probably be the better part of this.

If I didn't have too much stuff already I would keep the bedsides and scrap the rest.

I hear you Zoomy, I would keep the bead at least but I'm running out of space and time.

Thanks for the interest.

Paul.

Old Chevy Lover · 08-19-2003, 11:45 AM

Where are you at in Penn? Do you know what gear it has in the rear end?

chevy_fatman · 08-19-2003, 03:10 PM

I'm located in Hanover, PA, I don't know what gears it has in the back, it's a '72 but it has 6 lugs suspension components.

Thank you. Paul.

**ScottH** · 08-19-2003, 10:49 PM

The rear was from a 69, but don't know the ratio.....hope that helps.

1969 GMC · 08-20-2003, 01:32 AM

what condition is the pasenger bedside in?

chevy_fatman · 08-20-2003, 10:30 AM

I think the bedside has a dent under the taillight area, and the area marked in this pic seems like a dent also I'm not sure of that one, the rest only has surface rust, I'll get you better pics this evening.

Thank you. Paul.

edit@ picture removed

rambler · 08-20-2003, 06:46 PM

Quote:

[i]I would keep the bead at least but I'm running out of space [/B]

I wish you weren't so far away, I need that bed! believe it or not, its in better shape than mine! but looking at your pics,, looks like you have plenty of room

to store it.. look at all that nice green grass!

chevy_fatman · 08-20-2003, 09:08 PM

More pics.

Rambler, my junk could be your treasure

Another from the driver's side...

One more.....

Right rear end of bed.

Thank you for the interest.

chevy_fatman · 08-22-2003, 12:22 PM

Anyone??

The money will go to the "support the 67-72 chevy trucks site fund" (will be donated to the site here)

pa_snowman · 08-23-2003, 12:26 AM

Tell me about the frame/chassie. you said 6 lug are the by chance disks? Does it have power stearing?

mooneyes · 08-23-2003, 11:23 AM

....is the cab totally scrap or could it be patched up for a daily driver?

chevy_fatman · 08-23-2003, 12:22 PM

pa_snowman, the frame has drums alll the way around, no power steering.

mooneyes, I guess that cab could be repaired, but I consider it's not worth the hassle, at least to me, it needs inner rockers on both sides, outer rocker on at least the pass side and cab corners the floor in tha cab seems solid that I can remember.

I can take some pics later today.

Thanks. Paul.

08-18-2003, 10:57 PM	#1
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	FS LWB rolling chassis with bed $25 I have had this for a while and it's time for it to go, NO TITLE I'm asking $25 for it since the local scrap yard will give me some 35 bucks for it but I tought that someone here might use some of this instead of me scraping it. Here's some pics of it, tires DON'T COME WITH IT, they're not mine. Fatman. edit@ picture removed __________________ Paul How do you make the invisible, visible?.........You take it away. Last edited by chevy_fatman; 10-24-2003 at 07:33 AM.

08-18-2003, 10:58 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	Another side. edit@ picture removed __________________ Paul How do you make the invisible, visible?.........You take it away. Last edited by chevy_fatman; 10-24-2003 at 07:33 AM.

08-19-2003, 12:31 AM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	is that a wood or metal floor and can u post more pics of the bed __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

08-19-2003, 12:47 AM	#5
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	truck That would be a keeper here in the salt belt.

08-19-2003, 11:45 AM	#7
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 718	Where are you at in Penn? Do you know what gear it has in the rear end? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

08-18-2003, 11:25 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Hey that looks familar! Good a/c dash for somebody.......

08-19-2003, 03:10 PM	#8
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	I'm located in Hanover, PA, I don't know what gears it has in the back, it's a '72 but it has 6 lugs suspension components. Thank you. Paul. __________________ Paul How do you make the invisible, visible?.........You take it away.

08-19-2003, 10:49 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	The rear was from a 69, but don't know the ratio.....hope that helps.

08-20-2003, 01:32 AM	#10
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	what condition is the pasenger bedside in? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

08-20-2003, 10:30 AM	#11
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	I think the bedside has a dent under the taillight area, and the area marked in this pic seems like a dent also I'm not sure of that one, the rest only has surface rust, I'll get you better pics this evening. Thank you. Paul. edit@ picture removed __________________ Paul How do you make the invisible, visible?.........You take it away. Last edited by chevy_fatman; 10-24-2003 at 07:34 AM.

08-20-2003, 09:08 PM	#13
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	More pics. Rambler, my junk could be your treasure Another from the driver's side... One more..... Right rear end of bed. Thank you for the interest. __________________ Paul How do you make the invisible, visible?.........You take it away.

08-22-2003, 12:22 PM	#14
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	TTT Anyone?? The money will go to the "support the 67-72 chevy trucks site fund" (will be donated to the site here) __________________ Paul How do you make the invisible, visible?.........You take it away.

08-23-2003, 12:26 AM	#15
pa_snowman Registered User Join Date: Aug 2003 Location: Meyersdale, PA Posts: 144	Tell me about the frame/chassie. you said 6 lug are the by chance disks? Does it have power stearing? __________________ jim gallagher

08-23-2003, 11:23 AM	#16
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	....is the cab totally scrap or could it be patched up for a daily driver? __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

08-23-2003, 12:22 PM	#17
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	pa_snowman, the frame has drums alll the way around, no power steering. mooneyes, I guess that cab could be repaired, but I consider it's not worth the hassle, at least to me, it needs inner rockers on both sides, outer rocker on at least the pass side and cab corners the floor in tha cab seems solid that I can remember. I can take some pics later today. Thanks. Paul. __________________ Paul How do you make the invisible, visible?.........You take it away.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.