MN Parting out 87 Suburban - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 08-05-2011, 02:37 AM

How nice are the front doors? I really need a LH door in good shape. Thanks Ryan.

jimig1 · 08-05-2011, 10:21 AM

The doors are pretty rust free there are no holes they have a little at the bottom but other then that they are good

**Dieselwrencher** · 08-05-2011, 04:29 PM

Could you get me some pics of them, and how close are you to Owatanna?

jimig1 · 08-05-2011, 04:51 PM

I'll get some pics for you I'm about an hour from Owatanna

**Dieselwrencher** · 08-05-2011, 06:37 PM

Quote:

Originally Posted by jimig1

I'll get some pics for you I'm about an hour from Owatanna

Thanks. North or South?

jimig1 · 08-21-2011, 02:13 PM

Quote:

Originally Posted by Dieselwrencher

Thanks. North or South?

I'm about an hour north here are the pics of the drivers door

jimig1 · 08-21-2011, 02:15 PM

Passenger door

Liddy71 · 08-21-2011, 03:24 PM

does it have the plastic cover over the inside of tailgate if so how much and ship to 25570

thirdstreettito · 09-03-2011, 04:40 PM

How are the cables that hold the tailgate when it's down?

oldblue1968chevy · 09-03-2011, 11:27 PM

could you tear the distributor apart and tell me the #'s marked on the weights?

looking for #375 center weight and # 41 outside weights

if you've got em could you PM me, I dont check the squarebody forum much lol

leo5150 · 09-05-2011, 10:34 AM

how much for the front seatbelts? i only need the bases with bolts if possible. also was wondering how much for the wireing and moters and swithes ect. for the power windows to 32776

jimig1 · 09-14-2011, 09:06 PM

Sorry for not posting sooner but I was out of the country.

Quote:

Originally Posted by thirdstreettito

How are the cables that hold the tailgate when it's down?

I'll double check them but I had replaced them I think they are still in great condition.

Quote:

Originally Posted by oldblue1968chevy

could you tear the distributor apart and tell me the #'s marked on the weights?

looking for #375 center weight and # 41 outside weights

if you've got em could you PM me, I dont check the squarebody forum much lol

I'll check and PM you

Quote:

Originally Posted by leo5150

how much for the front seatbelts? i only need the bases with bolts if possible. also was wondering how much for the wireing and moters and swithes ect. for the power windows to 32776

How about $20 for the belts. For the power windows are you looking for the regulators with the motors and the wiring?

oldblue1968chevy · 09-14-2011, 10:54 PM

Just looking for the 41's I belive, I already have a line on the 375 (but if its cheap enough I'll take em anyway lol)

Pm me is fine I rarely check yalls board

leo5150 · 09-15-2011, 04:54 PM

How about $20 for the belts. For the power windows are you looking for the regulators with the motors and the wiring?[/QUOTE]

i was thinking about adding power to my 86' Blazer. so I don't know what I'll need to be truthful.

Can you PM me with your info for the belts

Thanks

HeavyMetalChevy · 09-28-2011, 09:28 AM

instrument cluster pics? please and thankyou

jimig1 · 10-02-2011, 11:21 PM

Quote:

Originally Posted by HeavyMetalChevy

instrument cluster pics? please and thankyou

Here is the gauge cluster

HeavyMetalChevy · 10-03-2011, 10:08 AM

Quote:

Originally Posted by jimig1

Here is the gauge cluster

How much for cluster with bezel shipped to 47043... pm me or what ever works for you...Highly interested.

Thanks,
Duane

codyboylester · 10-25-2011, 12:03 AM

Hi do you still have the rear tail pan support? What is the condition of the pan?
Thanks,
Vince

jimig1 · 10-25-2011, 12:51 AM

Are you talking about the support for the tailgate? If so it is good there is no rust on it that i can see. It was new in 2002 or 2003.

TRC911 · 10-25-2011, 07:35 PM

would you sell the drivers side door mirror?

jimig1 · 10-25-2011, 08:17 PM

Quote:

Originally Posted by TRC911

would you sell the drivers side door mirror?

Yes I have on that is not on that is in better condition i can get a pic and post it

TRC911 · 10-25-2011, 08:28 PM

I actually need a rusty one, the rustier the better-Bought my truck and it was a city work truck in Ottawa Canada. So everything is rusted

Any idea on a price shipped to 40162? I have about $27 to work with-I have a very good condition (like new) one that was a present from the previous owner, but it is out of place on the rust bucket

turner16 · 10-27-2011, 06:25 AM

Looking for the dash bezel around the AC vents. and the AC vents and I need the defrost grills of vents. Can you ship to Canada? Toronto, Ontario, M1C 2C6 is my stuff.

jimig1 · 10-27-2011, 09:17 AM

Quote:

Originally Posted by TRC911

I actually need a rusty one, the rustier the better-Bought my truck and it was a city work truck in Ottawa Canada. So everything is rusted

Any idea on a price shipped to 40162? I have about $27 to work with-I have a very good condition (like new) one that was a present from the previous owner, but it is out of place on the rust bucket

Let me find out shipping and ill let you know

jimig1 · 10-27-2011, 09:28 AM

Quote:

Originally Posted by turner16

Looking for the dash bezel around the AC vents. and the AC vents and I need the defrost grills of vents. Can you ship to Canada? Toronto, Ontario, M1C 2C6 is my stuff.

I just want to make sure we are on the same page but you are looking for what is in the pic? Not sure what AC vents. The defrost grills of vents are the ones on top of the dash?

08-05-2011, 02:37 AM	#51
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,138	Re: Parting out 87 Suburban How nice are the front doors? I really need a LH door in good shape. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-05-2011, 10:21 AM	#52
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: Parting out 87 Suburban The doors are pretty rust free there are no holes they have a little at the bottom but other then that they are good __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

08-05-2011, 04:29 PM	#53
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,138	Re: Parting out 87 Suburban Could you get me some pics of them, and how close are you to Owatanna? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-05-2011, 04:51 PM	#54
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: Parting out 87 Suburban I'll get some pics for you I'm about an hour from Owatanna __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

08-21-2011, 02:15 PM	#57
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: Parting out 87 Suburban Passenger door Attached Images __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

08-21-2011, 03:24 PM	#58
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out 87 Suburban does it have the plastic cover over the inside of tailgate if so how much and ship to 25570

09-03-2011, 04:40 PM	#59
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Parting out 87 Suburban How are the cables that hold the tailgate when it's down? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

09-03-2011, 11:27 PM	#60
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 87 Suburban could you tear the distributor apart and tell me the #'s marked on the weights? looking for #375 center weight and # 41 outside weights if you've got em could you PM me, I dont check the squarebody forum much lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-05-2011, 10:34 AM	#61
leo5150 Registered User Join Date: Aug 2011 Location: sorrento fl Posts: 11	Re: Parting out 87 Suburban how much for the front seatbelts? i only need the bases with bolts if possible. also was wondering how much for the wireing and moters and swithes ect. for the power windows to 32776

09-14-2011, 10:54 PM	#63
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out 87 Suburban Just looking for the 41's I belive, I already have a line on the 375 (but if its cheap enough I'll take em anyway lol) Pm me is fine I rarely check yalls board __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-15-2011, 04:54 PM	#64
leo5150 Registered User Join Date: Aug 2011 Location: sorrento fl Posts: 11	Re: Parting out 87 Suburban How about $20 for the belts. For the power windows are you looking for the regulators with the motors and the wiring?[/QUOTE] i was thinking about adding power to my 86' Blazer. so I don't know what I'll need to be truthful. Can you PM me with your info for the belts Thanks

09-28-2011, 09:28 AM	#65
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Parting out 87 Suburban instrument cluster pics? please and thankyou __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-25-2011, 12:03 AM	#68
codyboylester Registered User Join Date: Jul 2009 Location: Greendale, Wisconsin Posts: 1	Re: Parting out 87 Suburban Hi do you still have the rear tail pan support? What is the condition of the pan? Thanks, Vince

10-25-2011, 12:51 AM	#69
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: Parting out 87 Suburban Are you talking about the support for the tailgate? If so it is good there is no rust on it that i can see. It was new in 2002 or 2003. __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

10-25-2011, 07:35 PM	#70
TRC911 Registered User Join Date: Sep 2011 Location: KY Posts: 25	Re: Parting out 87 Suburban would you sell the drivers side door mirror?



Register or Log In To remove these advertisements.

10-25-2011, 08:28 PM	#72
TRC911 Registered User Join Date: Sep 2011 Location: KY Posts: 25	Re: Parting out 87 Suburban I actually need a rusty one, the rustier the better-Bought my truck and it was a city work truck in Ottawa Canada. So everything is rusted Any idea on a price shipped to 40162? I have about $27 to work with-I have a very good condition (like new) one that was a present from the previous owner, but it is out of place on the rust bucket

10-27-2011, 06:25 AM	#73
turner16 Registered User Join Date: Sep 2010 Location: Ajax, Ontario Posts: 214	Re: Parting out 87 Suburban Looking for the dash bezel around the AC vents. and the AC vents and I need the defrost grills of vents. Can you ship to Canada? Toronto, Ontario, M1C 2C6 is my stuff.

Register or Log In To remove these advertisements.