The billet flywheel came in, for my next LS build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crazy longhorn · 04-18-2022, 07:04 PM

Ordered friday afternoon.....came in sunday! Today, I orderd the street twin set from summit racing.....yes a dual plate clutch, going in my old longhorn! I hope she is good, said to hang onto 800 HP! 400-450, & a little shot on the blue bottle, should be good

My kids are raised & gone, time to have big fun! longhorn

**Dieselwrencher** · 04-19-2022, 10:09 AM

This sounds awesome! Please post a build thread of this deal when you do it. I'm wanting to do a turbo LS build in something.

crazy longhorn · 04-19-2022, 04:54 PM

That turbo /LS, would be cool as he!! I will say the same thing....show us on the build

Longhorn....too old to rock & roll, but too young to give it up

crazy longhorn · 04-21-2022, 04:38 PM

THE TWIN street clutch came in today......sweet as he!! That old longhorn is gonna rock it! Looking @ on the crate 425-450 & a shot on the blue bottle

longhorn

**Dieselwrencher** · 04-23-2022, 08:16 AM

Oh yeah! That will be fun!

crazy longhorn · 04-23-2022, 01:07 PM

Well, one of my buds said (you will be paying for a lot of tires)

Tires are cheap.....if that is all you tear up!

I love the smell of that rubber smoke! Longhorn

**MySons68C20** · 04-23-2022, 02:22 PM

Where's the pics??

crazy longhorn · 04-23-2022, 06:25 PM

Quote:

Originally Posted by MySons68C20

Where's the pics??

What do you want to see.....that bad azz clutch, or the truck? will try for pics tomorrow, need to get some on the Harley also.....trying to sell to the local stealer (dealer). Longhorn

crazy longhorn · 04-30-2022, 07:07 PM

Quote:

Originally Posted by MySons68C20

Where's the pics??

Ask and you shall receive-Son of CrazyL

**MySons68C20** · 04-30-2022, 08:02 PM

Quote:

Originally Posted by crazy longhorn

Ask and you shall receive-Son of CrazyL

Clutch porn thanks for the pics Son of CrazyL!
Time for a smoke show

crazy longhorn · 04-30-2022, 09:08 PM

Quote:

Originally Posted by MySons68C20

Clutch porn thanks for the pics Son of CrazyL!
Time for a smoke show

Ok,can do.....but i have to ask what did you think about the old truck? Longhorn

**MySons68C20** · 05-01-2022, 11:39 AM

Quote:

Originally Posted by crazy longhorn

Ok,can do.....but i have to ask what did you think about the old truck? Longhorn

It looks like you are doing it right! You have done so much work I can't wait to see it completed. Well done!

crazy longhorn · 05-01-2022, 06:41 PM

I do not know, if the old truck will ever be finished....you just add as you go! The top chop is 3 3/4 @ the rear, tipped foward 1/4 @ the front. A Pillars are layed back (60hrs of my time). I cut the windshield, & the rear glass. I have the wing vents layed out, as well as the patterns for the side glass. That tilt clip is STEEL! The old truck is chopped /dropped/ channeled slightly over the rails. I will bet that you will not ever see another longhorn like that. I will say that the only thing that I did not do, was the recore on the radiator! Longhorn

04-18-2022, 07:04 PM	#1
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	The billet flywheel came in, for my next LS build Ordered friday afternoon.....came in sunday! Today, I orderd the street twin set from summit racing.....yes a dual plate clutch, going in my old longhorn! I hope she is good, said to hang onto 800 HP! 400-450, & a little shot on the blue bottle, should be good My kids are raised & gone, time to have big fun! longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

04-19-2022, 10:09 AM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,134	Re: The billet flywheel came in, for my next LS build This sounds awesome! Please post a build thread of this deal when you do it. I'm wanting to do a turbo LS build in something. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-19-2022, 04:54 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: The billet flywheel came in, for my next LS build That turbo /LS, would be cool as he!! I will say the same thing....show us on the build Longhorn....too old to rock & roll, but too young to give it up __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

04-21-2022, 04:38 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: The billet flywheel came in, for my next LS build THE TWIN street clutch came in today......sweet as he!! That old longhorn is gonna rock it! Looking @ on the crate 425-450 & a shot on the blue bottle longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

04-23-2022, 08:16 AM	#5
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,134	Re: The billet flywheel came in, for my next LS build Oh yeah! That will be fun! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-23-2022, 01:07 PM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: The billet flywheel came in, for my next LS build Well, one of my buds said (you will be paying for a lot of tires) Tires are cheap.....if that is all you tear up! I love the smell of that rubber smoke! Longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

04-23-2022, 02:22 PM	#7
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 897	Re: The billet flywheel came in, for my next LS build Where's the pics??

05-01-2022, 06:41 PM	#13
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: The billet flywheel came in, for my next LS build I do not know, if the old truck will ever be finished....you just add as you go! The top chop is 3 3/4 @ the rear, tipped foward 1/4 @ the front. A Pillars are layed back (60hrs of my time). I cut the windshield, & the rear glass. I have the wing vents layed out, as well as the patterns for the side glass. That tilt clip is STEEL! The old truck is chopped /dropped/ channeled slightly over the rails. I will bet that you will not ever see another longhorn like that. I will say that the only thing that I did not do, was the recore on the radiator! Longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.