The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-17-2022, 12:45 PM   #1
Senior Member
KyFarm's Avatar
Join Date: Sep 2009
Location: Taylorsville, KY
Posts: 251
Shifter Linkage

This is the linkage bracket that I have:

I've installed a 4L70E and the trans shifter connector isn't exactly across from the pivot rod coming off the frame.

My question is if there is a little play in the hole on the bracket that slides over the pivot rod does the rod and the connector HAVE to be directly across from each other?

My plan is to drill/dremel a slot in the bracket to slide over the trans connector.

Additional question if anyone know:
I want to insure the transmission is in "park", would twisting the shifter rod counter clockwise (top of rod towards front of truck) all the way be "park" or would twisting the rod clockwise (towards rear of truck) put it in "park"

Thanks for any help
Attached Images
KyFarm's Build/Need help thread

1969 K-10, Short Step, (383HT/4L70E soon)-NP205
KyFarm is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 09:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright 1997-2022