OR Parting out 72 Suburban K10 350 TH350 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bgrdmoose** · 07-28-2013, 04:02 AM

Ill take it. I'll be passing thru on Thursday the 8th. Pm sent
Posted via Mobile Device

**chewysask** · 07-28-2013, 10:18 AM

do you have any rearseat seatbelt brackets ?

**tll74** · 07-28-2013, 11:16 AM

Quote:

Originally Posted by Bgrdmoose

Ill take it. I'll be passing thru on Thursday the 8th. Pm sent
Posted via Mobile Device

Sold...PM returned

Quote:

Originally Posted by chewysask

do you have any rearseat seatbelt brackets ?

Sorry none at this time.

Thanks, Tom

unclefreddy · 08-06-2013, 08:08 PM

Would you happen to have the wire harness to the rear AC unit ? Thanks

**tll74** · 08-07-2013, 04:16 PM

Quote:

Originally Posted by unclefreddy

Would you happen to have the wire harness to the rear AC unit ? Thanks

Sorry, not separate from a rear AC conversion.

unclefreddy · 08-07-2013, 04:19 PM

How about any stock 16.5x9.75 steel wheels or bucket seats with brackets ?

**tll74** · 08-07-2013, 04:32 PM

Quote:

Originally Posted by unclefreddy

How about any stock 16.5x9.75 steel wheels or bucket seats with brackets ?

Sorry, neither at this time. Thanks, Tom

Chuck K · 08-20-2013, 09:19 PM

Quote:

Originally Posted by tll74

What headliner panels......worse than bad they are totally gone. Picking up a 72 Tuesday it may have some. Thanks, Tom

Tom
If the 72 you are picking up Tuesday has upper moldings with barn doors I would be interested in them. Thanks Chuck

**tll74** · 08-26-2013, 02:07 AM

Quote:

Originally Posted by Chuck K

Tom
If the 72 you are picking up Tuesday has upper moldings with barn doors I would be interested in them. Thanks Chuck

Chuck, are you looking for the complete upper trim kit or just the trim on the rear barn doors?

Chuck K · 08-26-2013, 09:37 AM

Tom, I am in need of the complete upper molding kit. Thanks Chuck

1leglance · 08-26-2013, 06:03 PM

Howdy Tom,
It was tough to follow all 7 pages of this thread but I think you might still have one of these around

I am looking for the drivers side metal channel that goes between the roll up glass and the non-moving glass.
Only need the drivers side but I put an arrow on the pass side one as a reference also.

Please let me know cost with shipping to 85008
thanks
Lance

**tll74** · 09-02-2013, 12:47 PM

Quote:

Originally Posted by 1leglance

Howdy Tom,
It was tough to follow all 7 pages of this thread but I think you might still have one of these around

I am looking for the drivers side metal channel that goes between the roll up glass and the non-moving glass.
Only need the drivers side but I put an arrow on the pass side one as a reference also.

Please let me know cost with shipping to 85008
thanks
Lance

Lance, 28.00 shipped. Thanks, Tom

**tll74** · 09-02-2013, 12:49 PM

Quote:

Originally Posted by Chuck K

Tom, I am in need of the complete upper molding kit. Thanks Chuck

Chuck, I have the kit on a couple tailgate style trucks for sure. I will have to look to see if I have the barn door pieces. Thanks, Tom

Chuck K · 09-02-2013, 05:34 PM

Thanks Tom for checking keep me posted if nothing else I may take a set with the tailgate and keep my eyes open for the rear doors. Thanks again Chuck.

Ccastro6330 · 09-05-2013, 10:35 AM

Wanted to know if you still had the front drive shaft and the length and the linkage for the transmission where at for pickup
Posted via Mobile Device

**tll74** · 09-06-2013, 11:59 AM

Quote:

Originally Posted by Chuck K

Thanks Tom for checking keep me posted if nothing else I may take a set with the tailgate and keep my eyes open for the rear doors. Thanks again Chuck.

Chuck, I do not have the rear barn door trim. I could do a lift gate kit in very nice condition.

Quote:

Originally Posted by Ccastro6330

Wanted to know if you still had the front drive shaft and the length and the linkage for the transmission where at for pickup
Posted via Mobile Device

Yes on the driveline 125.00 plus shipping. I will have to check for the AT shift linkage. 45.00 if I have it.

Chuck K · 09-07-2013, 10:11 AM

Tom let me know what you want for the upper molding trim kit. Thanks Chuck

**tll74** · 09-07-2013, 11:22 AM

Quote:

Originally Posted by Chuck K

Tom let me know what you want for the upper molding trim kit. Thanks Chuck

Chuck, 125.00 plus the shipping. I would guess around 25.00-30.00 shipping due to the length. It would be be in a heavy cardboard tube. Thanks, Tom

Chuck K · 09-08-2013, 01:52 PM

Tom, as long as everything is straight I will take the upper molding kit. If you run across the back door trim please keep me in mind. Pm me the payment info thanks for your help! Chuck

Chuck K · 09-16-2013, 08:00 PM

Tom, If you get they shipping total on the trim kit let me know. I will be out of town until next week and will get the money out to you when I get back. Thanks Chuck

**tll74** · 09-17-2013, 01:55 AM

Pics of rear barn door handle.

DBear · 09-19-2013, 05:08 PM

any sheet metal left. If so, I am interested. Thanks

Whittaker · 09-19-2013, 06:13 PM

Any chance you would have a complete third door the rear passenger side and cut the door jams roof and the surrounding sheet metal?

I have a 68 Sub and I use a wheelchair so I'm thinking about flipping the passenger door off another sub onto the left/drivers side of mine where it would open suicide to the rear so i car reach behind me from the drivers seat and pull my wheelchair in the back.

The door itself not the rocker itself aren't as important as the metal around it. and the door post with latch and hinges etc.

Thanks,
Rob

**botmfedr1** · 09-20-2013, 03:07 PM

Tom,

Do you have the rear leaf spring shackle??

Price shipped to 78552,

Thanks,
Mondo
Posted via Mobile Device

**botmfedr1** · 09-20-2013, 09:56 PM

Driver's side....
Posted via Mobile Device

07-28-2013, 04:02 AM	#151
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 436	Re: Parting out 72 Suburban K10 350 TH350 Ill take it. I'll be passing thru on Thursday the 8th. Pm sent Posted via Mobile Device

07-28-2013, 10:18 AM	#152
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: Parting out 72 Suburban K10 350 TH350 do you have any rearseat seatbelt brackets ?

08-06-2013, 08:08 PM	#154
unclefreddy Registered User Join Date: Jun 2013 Location: ukiah, california Posts: 333	Re: Parting out 72 Suburban K10 350 TH350 Would you happen to have the wire harness to the rear AC unit ? Thanks

08-07-2013, 04:19 PM	#156
unclefreddy Registered User Join Date: Jun 2013 Location: ukiah, california Posts: 333	Re: Parting out 72 Suburban K10 350 TH350 How about any stock 16.5x9.75 steel wheels or bucket seats with brackets ?

08-26-2013, 09:37 AM	#160
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban K10 350 TH350 Tom, I am in need of the complete upper molding kit. Thanks Chuck

08-26-2013, 06:03 PM	#161
1leglance Registered User Join Date: Mar 2006 Location: phoenix Posts: 254	Re: Parting out 72 Suburban K10 350 TH350 Howdy Tom, It was tough to follow all 7 pages of this thread but I think you might still have one of these around I am looking for the drivers side metal channel that goes between the roll up glass and the non-moving glass. Only need the drivers side but I put an arrow on the pass side one as a reference also. Please let me know cost with shipping to 85008 thanks Lance

09-02-2013, 05:34 PM	#164
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban K10 350 TH350 Thanks Tom for checking keep me posted if nothing else I may take a set with the tailgate and keep my eyes open for the rear doors. Thanks again Chuck.

09-05-2013, 10:35 AM	#165
Ccastro6330 Registered User Join Date: Mar 2013 Location: Granger, WA Posts: 15	Re: Parting out 72 Suburban K10 350 TH350 Wanted to know if you still had the front drive shaft and the length and the linkage for the transmission where at for pickup Posted via Mobile Device

09-07-2013, 10:11 AM	#167
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban K10 350 TH350 Tom let me know what you want for the upper molding trim kit. Thanks Chuck

09-08-2013, 01:52 PM	#169
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban K10 350 TH350 Tom, as long as everything is straight I will take the upper molding kit. If you run across the back door trim please keep me in mind. Pm me the payment info thanks for your help! Chuck

09-16-2013, 08:00 PM	#170
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban K10 350 TH350 Tom, If you get they shipping total on the trim kit let me know. I will be out of town until next week and will get the money out to you when I get back. Thanks Chuck

09-17-2013, 01:55 AM	#171
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban K10 350 TH350 Pics of rear barn door handle. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

09-19-2013, 05:08 PM	#172
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	Re: Parting out 72 Suburban K10 350 TH350 any sheet metal left. If so, I am interested. Thanks

09-19-2013, 06:13 PM	#173
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: Parting out 72 Suburban K10 350 TH350 Any chance you would have a complete third door the rear passenger side and cut the door jams roof and the surrounding sheet metal? I have a 68 Sub and I use a wheelchair so I'm thinking about flipping the passenger door off another sub onto the left/drivers side of mine where it would open suicide to the rear so i car reach behind me from the drivers seat and pull my wheelchair in the back. The door itself not the rocker itself aren't as important as the metal around it. and the door post with latch and hinges etc. Thanks, Rob

09-20-2013, 03:07 PM	#174
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: Parting out 72 Suburban K10 350 TH350 Tom, Do you have the rear leaf spring shackle?? Price shipped to 78552, Thanks, Mondo Posted via Mobile Device



Register or Log In To remove these advertisements.

09-20-2013, 09:56 PM	#175
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: Parting out 72 Suburban K10 350 TH350 Driver's side.... Posted via Mobile Device

Register or Log In To remove these advertisements.