OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More

[MoreLoveThanMoney]

After spenfing two years collecting parts and planning on building the ultimate Blazer, life has changed my plans. You guys have helped me in knowing what to do and what parts to be collecting so now I am turning to you guys to help me clear out my collection.
The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Truck Parts as well. Check out the thread in that forum with the EVERYTHING MUST GO title. Here we go

72 Suburban Rolling 2wd, Possible Rebuild but May Be Better For Parts $1000 No Title
72 Blazer 4wd, (the primered one in the pics) 350/350/205 Setup, Body and Chassis Only, Was Running before I pulled the Front Clip $1500 Have Title
72 Jimmy Rolling, (the orange one in the pics) Body & Chassis Only, Was Converted to 2wd but still have all of the 4wd Stuff, Have Title
6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150
Suburban Third Door Strike Pillar and Hinge Pillar. This was cut from a salvaged Burban $75
Stainless Burban Interior Trim ??
Blazer Hard Top Glass ??
Blazer Double Wall Hard Top, Needs Edge Work but Really Nice Top $800
Blazer & Suburban Back Seat Frames w/ Arm Rest - qty 3 $100
Non Tilt Auto Columns - qty 3 $25 ea
Bench Seat Frames - qty 3 $25ea
Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea
Complete A/C Dash, Not Cut Up $150
Blazer/Suburban Gas Tank - $75ea
4X4 Transmission Tunnel Cover $75
Wide Bed Wheel Housings $25ea
69-72 Hoods - qty 3 $100 to $150
67-68 Grill Shell $300
69 Grill Assembly w/ CHEVROLET lettering $250
72 Grill Assembly 2/ Bow Tie $200
69-72 Driver Fender Rust Free - qty 2 $75ea
Drivers Inner Fender $40
Radiator/Core Support Battery Tray Rusted but nothing else $75
67-72 Rear Chrome Bumper $50 Aftermarket but straight
67-70 Chrome Front Bumper $75 Original but needs some edge straightening
10 Bolt 1/2 Ton 4wd Front Axle w/ springs $100
Turbo 350 2wd Trans $75
700R4 2wd Trans $75
350 4 Bolt Main Block only with Caps $100
Complete 454 Big Block w/ accessories $650
I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!!

I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions.

For Pick Up, I am located just outside of Oklahoma City.

Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com

I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) .
http://s1057.photobucket.com/albums/...%2072%20TRUCK/
If you would like more detailed photos or information please let me know.

Thanks for looking and I hope someone out there can put all of this stuff to good use.

[Thealien]

Might be interested in a pair of 72 rust free doors with no speaker holes?

[Areohbe]

Do you have the upper molding for the Suburban?

[Ridnhi]

Do you have a set of rear panel stand-off brackets? I'm looking for the six that mount to bedside and i think there are 8 small angle iron brackets that mount to floor and front and rear bed side. Do you have any front or rear carpet strips? thanks, Eli

[MoreLoveThanMoney]

Originally Posted by Areohbe

Do you have the upper molding for the Suburban?

Interior or Exterior??

[MoreLoveThanMoney]

Originally Posted by Ridnhi

Do you have a set of rear panel stand-off brackets? I'm looking for the six that mount to bedside and i think there are 8 small angle iron brackets that mount to floor and front and rear bed side. Do you have any front or rear carpet strips? thanks, Eli

Let me look and see if the Surburban has them. I dont remember seeing them but I will check adn get back to you.

[bowtie72]

Do you have a set of blazer sun visors?
Posted via Mobile Device

[lucifer]

Any pics of the wide bed wheel housings??

Thanx

[MoreLoveThanMoney]

Originally Posted by lucifer

Any pics of the wide bed wheel housings??

Thanx

I will get those in the morning and get them posted.

[MoreLoveThanMoney]

Originally Posted by bowtie72

Do you have a set of blazer sun visors?
Posted via Mobile Device

I think I very well might. Let me check and Ill let you know.

[Flint70step]

clicked on link for photos but cant find where to input passwrd

[MoreLoveThanMoney]

Originally Posted by Flint70step

clicked on link for photos but cant find where to input passwrd

Try this link
http://s1057.photobucket.com/albums/...%2072%20TRUCK/

Takes you right to it

[MoreLoveThanMoney]

Just so everyone knows if the Burban needs to be cut up I am willing to do so. I know a lot of guys are wanting to do crew cab set ups and hard top Blazers.

[sam91]

I am interested in the blazer body and chasis. i cant get your photo bucket to work. could you email pics to samberg91@yahoo.com. I am in nw arkansas and could come and pic it up.

[sam91]

Originally Posted by sam91

I am interested in the blazer body and chasis. i cant get your photo bucket to work. could you email pics to samberg91@yahoo.com. I am in nw arkansas and could come and pic it up.

ok, i see the pics now. are you selling as it is in the pics, or will you be pulling more parts off?

[UP GRADE]

Are u willing to ship the gas tank And straps?
Posted via Mobile Device

[highrpm]

How much on the fuel tank straps and what condition are they in?

Thanks

[Areohbe]

Originally Posted by MoreLoveThanMoney

Interior or Exterior??

I am looking for the exterior upper molding. It runs just below the windows and is about 1 1/2" wide.

[MoreLoveThanMoney]

Originally Posted by UP GRADE

Are u willing to ship the gas tank straps?
Posted via Mobile Device

Originally Posted by highrpm

How much on the fuel tank straps and what condition are they in?

Thanks

I am willling to ship the straps. They are in excellent condition as far as the metal goes and the rubber is actually still decent as well. Just a little surface stuff. The hook assemblies are nice and strong. What are these things even worth? I have no clue.

[MoreLoveThanMoney]

Originally Posted by lucifer

Any pics of the wide bed wheel housings??

Thanx

These are in really pretty good shape. A little straightening maybe but the flanges are very solid.

[MoreLoveThanMoney]

Originally Posted by bowtie72

Do you have a set of blazer sun visors?
Posted via Mobile Device

I have found one so far. Need to look in my storage and see if I have the other one. Ill let you know this weekend.

[MoreLoveThanMoney]

Originally Posted by Areohbe

I am looking for the exterior upper molding. It runs just below the windows and is about 1 1/2" wide.

Let me check my storage and Ill let you know this weekend

[MoreLoveThanMoney]

Originally Posted by UP GRADE

Are u willing to ship the gas tank And straps?
Posted via Mobile Device

Youre wanting a tank too? Not a problem. Ill ship it

[UP GRADE]

Yeah, can you get some pictures of both tanks?
Posted via Mobile Device

[MoreLoveThanMoney]

Originally Posted by UP GRADE

Yeah, can you get some pictures of both tanks?
Posted via Mobile Device

Sure will. May not be till morning though.