Re: One-Man Cab & Bed Lift
 

payment sent also

Re: One-Man Cab & Bed Lift
 

Just sent payment for the bed lift and the cab tilt and roll. Let me know when they ship.
Posted via Mobile Device

Re: One-Man Cab & Bed Lift
 

What's the gas pedal mounting kit?

Re: One-Man Cab & Bed Lift
 

just sent money for cab lift and dolly, thanks

Re: One-Man Cab & Bed Lift
 

Payment sent
Posted via Mobile Device

Re: One-Man Cab & Bed Lift
 

all orders are shipping out in the morning.

Kevin
LFD Inc.

Re: One-Man Cab & Bed Lift
 

What's the gas pedal mounting kit?

Re: One-Man Cab & Bed Lift
 

Re: One-Man Cab & Bed Lift
 

http://67-72chevytrucks.com/vboard/s...d.php?t=371099
Here you go.

Kevin
LFD Inc.
Posted via Mobile Device

Re: One-Man Cab & Bed Lift
 

Are you still selling the cab and bed lift plans

Re: One-Man Cab & Bed Lift
 

Just sent payment

Re: One-Man Cab & Bed Lift
 

Already sent!

Thank you,
Kevin
LFD Inc.

Re: One-Man Cab & Bed Lift
 

Does this work with a 1 ton lift or do you need a 2 ton lift? I already have a 1 ton cherry picker from harbor freight that I used for the engine on my jeep but I'm not sure it has the reach and I really do not want to get another one.

Re: One-Man Cab & Bed Lift
 

I'm not sure, I never seen or used a 1ton lift.

Kevin
LFD Inc.

Re: One-Man Cab & Bed Lift
 

I think mine was a 2-ton, but really none of them are when the boom is fully extended, which is what you need.

The cab is actually light. The bed seems much heavier. It looked like some serious arcing (bending) of the boom when I found out there was still a bolt holding it down :-)

Re: One-Man Cab & Bed Lift
 

I built mine years ago I love them . I'm getting old and had to figure out a easier was to lift.

Re: One-Man Cab & Bed Lift
 

Just sent payment

Re: One-Man Cab & Bed Lift
 

Just sent a payment.

Re: One-Man Cab & Bed Lift
 

it works great

Re: One-Man Cab & Bed Lift
 

Just ordered the cab dolly and the bed lift. Thanks!
Mike

Re: One-Man Cab & Bed Lift
 

Just sent payment for one man cab lifter. Thanks

Re: One-Man Cab & Bed Lift
 

All orders will ship out Saturday.
Thank you.
Kevin
LFD Inc.

Re: One-Man Cab & Bed Lift
 

Kevin, just sent PayPal for a set of plans for tilt and for lift both. Thanks, Jay

Re: One-Man Cab & Bed Lift
 

Anyone ever try to lift a suburban body with one ( or two ) of these I was thinking one in the door as shown and then one in the rear doors?

Any thoughts

Brian

Re: One-Man Cab & Bed Lift
 

That's a ton of weight, completely striped it would still be heavy. I would do it ,but like this one end at a time

Re: One-Man Cab & Bed Lift
 

That was kinda my thought as we'll but I was thinking using them both at the same time but I agree with you on the weight issue

I think it would have to be a very slow and steady process and then roll the chassis out

I think I'm gonna order the plans and give it a shot!!

Re: One-Man Cab & Bed Lift
 

I have one of the lifts, have used it for cabs and for boxes, I did not use it for the blazer. I would not use it to lift, too unstable, and I think it's easier just to use chains and straps.
I lifted a body off a 57 panel the same way, took me a couple hours after I stripped it

Re: One-Man Cab & Bed Lift
 

Just ordered a lift. Thanks!

Re: One-Man Cab & Bed Lift
 

Do you still make these kits?

Re: One-Man Cab & Bed Lift
 

Hey Kevin, PayPal sent 9/28 for cab & bed lift plans. Thanks!

Re: One-Man Cab & Bed Lift
 

wish i took pics when i did mine i used straps on my box cris cross and picked up in the middle from the back cleared everything with cherry picker

Re: One-Man Cab & Bed Lift
 

Just ordered the lift and dolly plans...much thanks!

Re: One-Man Cab & Bed Lift
 

would like to order plans bed/cab lift please PM me order details

Thanks Blaine

Re: One-Man Cab & Bed Lift
 

Would like to order cab/bed lift plans, still available?

Re: One-Man Cab & Bed Lift
 

I've never built with steel. What do you use to make the cuts? Thanks for any advise.

Re: One-Man Cab & Bed Lift
 

The cheapest way is with an abrasive cut off saw or chop saw. You can even get a blade for a regular wood cutting skill saw but it is not real accurate. I now use a band saw for most of my metal tube or stock cutting but they are way more expensive to purchase but over time pay off with clean accurate cuts, no sparks and not as much noise.

Also these plans are now available in PDF E-files for faster delivery!

Kevin
LFD

Re: One-Man Cab & Bed Lift
 

nice tool to have, but I ll have to find my truck 1st =0)

Re: One-Man Cab & Bed Lift
 

What is the cost for a set of both the lift and tilt plans in PDF format? And how do I order and pay? - Buck

Re: One-Man Cab & Bed Lift
 

It is $48.90 and you PayPal to rokcrln@pacbell.net then send an email to me at kevinl.pace@me.com with your shipping info and sets ordered. I'll confirm payment and email out normally same day.

Kevin
LFD

Re: One-Man Cab & Bed Lift
 

Will do thanks!