The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What did you do with your truck today, Part 3 (https://67-72chevytrucks.com/vboard/showthread.php?t=713560)

evilokc 06-02-2018 02:21 PM

Re: What did you do with your truck today, Part 3
 
drove into cars and coffee. got a lot of attention. I think people relate to an in progress vehicle. even had a couple of guys ask questions about and tell me they cant wait for theirs to run and drive. then took it out to breakfast and a plant nursery. i was siting there talking with a guy while about to leave. he was complimented the rattle and thanked him and said "alright look away. if your looking it wont start" of course the rattle fired right to life. happy day of trucking.

Black_Sheep 06-02-2018 03:51 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Got a bunch of small parts ready for paint and started sanding louvers for the 3rd or 4th time...

55cruiser 06-02-2018 05:44 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
[ATTACH]
Had a great day at Fleetwood Country Cruizin 2018 many TF and AD trucks.
Great to meet some of the people with trucks, Many cars trucks some where near 4500 vehicles for 2 day show. Excellent location and grounds for the show

MiraclePieCo 06-02-2018 07:53 PM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Spent 2 hours hammering out this severely mangled AD panel truck rear splash shield. Now needs rust spots patched.

evilokc 06-03-2018 12:16 AM

Re: What did you do with your truck today, Part 3
 
changed out my valve cover breather for a dual breather set up.

martin_95037 06-03-2018 04:11 PM

Re: What did you do with your truck today, Part 3
 
Move 1100+ gallons of water.

MARTINSR 06-03-2018 04:52 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Got the cab out of the garage for some sand blasting today. With my little compressor it's pretty much a joke but I did get some cleaned up. Out in the sun I also found 374 of welds I need to complete. This was NOT fun work out there in the sun blowing sand all over me, yeow, done for the day. I may feel like getting out there for a few minutes out there tonight but I doubt it.

I got out some "magic coating" rust stuff that I have and I will be using it, may epoxy primer over it but I will be getting out there at the very least tomorrow and start welding up stuff. I forgot I have to put some nuts on the back side ends of the hinge brackets on the cab too. So more work than I planned, I thought I was done with the cab but that was all but a fantasy. Basically I headed out for lunch with Sandra Bullock and ended up being stuck in an elevator with Roseann O'Donnell.

Another week working on this baby before any epoxy can be sprayed.


Brian

pvienneau 06-04-2018 10:27 AM

Re: What did you do with your truck today, Part 3
 
Painted/Rewired/removed rust and replaced the left rear blinker with the stainless steel conduit kit. Looks great. I will do the right next weekend. I also used the tech tip from Stovebolt to get it to sit right. https://www.stovebolt.com/techtips/e...ght%20bracket/

bennylava 06-04-2018 05:47 PM

Re: What did you do with your truck today, Part 3
 
I looked at it, thought about all the stuff I need to do to it, and came inside and started watching youtube videos instead.

evilokc 06-04-2018 06:43 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by bennylava (Post 8274895)
I looked at it, thought about all the stuff I need to do to it, and came inside and started watching youtube videos instead.

been there SO many times.

evilokc 06-04-2018 06:44 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by MARTINSR (Post 8274178)
Got the cab out of the garage for some sand blasting today. With my little compressor it's pretty much a joke but I did get some cleaned up. Out in the sun I also found 374 of welds I need to complete. This was NOT fun work out there in the sun blowing sand all over me, yeow, done for the day. I may feel like getting out there for a few minutes out there tonight but I doubt it.

I got out some "magic coating" rust stuff that I have and I will be using it, may epoxy primer over it but I will be getting out there at the very least tomorrow and start welding up stuff. I forgot I have to put some nuts on the back side ends of the hinge brackets on the cab too. So more work than I planned, I thought I was done with the cab but that was all but a fantasy. Basically I headed out for lunch with Sandra Bullock and ended up being stuck in an elevator with Roseann O'Donnell.

Another week working on this baby before any epoxy can be sprayed.


Brian

cab looks great. do mine next

evilokc 06-04-2018 11:08 PM

Re: What did you do with your truck today, Part 3
 
I removed the 2 middle bolts on my intake and added some sealant. there was a little oil seeping up the threads. need to do driver side as well

MARTINSR 06-04-2018 11:24 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by evilokc (Post 8274941)
cab looks great. do mine next

Well, I started this cab in 1992, so I hope you aren't in a hurry.

Brian

MARTINSR 06-04-2018 11:25 PM

Re: What did you do with your truck today, Part 3
 
Got some spots missed in my patches all welded up, then went to the holes in the drivers side floor that I hadn't seen before, made some patches, and now I have to re-think the whole thing. Do I replace the floor, do I make a new one, do I buy a repro, hmmmmmmmm

Brian

DeeJayNOLA 06-06-2018 12:02 AM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by evilokc (Post 8273510)
drove into cars and coffee. got a lot of attention. I think people relate to an in progress vehicle. even had a couple of guys ask questions about and tell me they cant wait for theirs to run and drive. then took it out to breakfast and a plant nursery. i was siting there talking with a guy while about to leave. he was complimented the rattle and thanked him and said "alright look away. if your looking it wont start" of course the rattle fired right to life. happy day of trucking.

Evil OKC what cars and coffee you went to. I'm going to try and make it a habit to go to Fastino's on Juan Tabo every Wednesday. Wife and kid both love the pizza.

MARTINSR 06-06-2018 12:43 AM

Re: What did you do with your truck today, Part 3
 
With coming home late, going out and voting with the wire and taking my evening walk, didn't get much done but got my "five minutes" in. Went to the hardware store and got flat stock to make the nuts on the back of my hinges, cut it into four pieces ready to go. I also got some Ospho on the inside of the metal pieces I will be installing on the back of the cab.

I have to tell you guys again, I never heard of anything like this until just a year or two ago. "Oil" reduces friction but this "cutting fluid" helps with tapping, or cutting, or drilling, it's friggin amazing stuff!

http://www.tapmagic.com/assets/uploa...-protapjpg.jpg

I was cutting this 1/4" thick flat stock with my air saw and it was taking a bit, I put a drip of "Tap Magic" on it and wham it started cutting much faster, amazing!

Brian

robertsjm711 06-06-2018 12:45 AM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
ELECTROLYSIS!!! :mmmk:

Jesse Z 06-06-2018 03:57 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by robertsjm711 (Post 8275788)
ELECTROLYSIS!!! :mmmk:

Are you trying to remove hair from your parts? ;-)

robertsjm711 06-06-2018 04:14 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by Jesse Z (Post 8276157)
Are you trying to remove hair from your parts? ;-)

Maybe...

Black_Sheep 06-06-2018 09:54 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Still sanding louvers, my hands feel like crab claws...

MARTINSR 06-07-2018 01:34 AM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Quote:

Originally Posted by Black_Sheep (Post 8276351)
Still sanding louvers, my hands feel like crab claws...

It'll be worth it, very cool!

At half time in the NBA Finals game 3 I got out to the garage! I got these nuts made and welded in to the back side of the hinge mounts. I did this to use that back bolt for fine tuning of the door fit. They used that bolt on the later trucks and cars, Don't know why they didn't on these.

The other photo is of the horrible factory work. It amazes me that I never spotted this before, maybe I did 20 years ago. Anyway, I can't leave it, I will be making a patch to clean that up too.

Brian

evilokc 06-07-2018 07:09 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by DeeJayNOLA (Post 8275776)
Evil OKC what cars and coffee you went to. I'm going to try and make it a habit to go to Fastino's on Juan Tabo every Wednesday. Wife and kid both love the pizza.

im not in Albuquerque anymore. im in Oklahoma city.

evilokc 06-07-2018 07:11 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by MARTINSR (Post 8275119)
Well, I started this cab in 1992, so I hope you aren't in a hurry.

Brian

I bought mine in 93 and its just getting to be truly road worthy so im right there with ya. what motor do you plan to run? if I were to do it again I think I would try and hop up a 250 inline. maybe even add a blower or turbo.

MARTINSR 06-07-2018 07:27 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by evilokc (Post 8276962)
I bought mine in 93 and its just getting to be truly road worthy so im right there with ya. what motor do you plan to run? if I were to do it again I think I would try and hop up a 250 inline. maybe even add a blower or turbo.

It will be getting a Blue Flame Six complete with 53 Corvette intake.

http://i200.photobucket.com/albums/a...ps2f35aed6.jpg

This is the motor it had when I bought it with my brother and his friend's homemade intake with a 55 Chevy four barrel.

http://i200.photobucket.com/albums/a...ps9e7732fb.jpg

And the motor I ran for years, a Mid-ship mounted 401 Buick with the carb between the bucket seats. :D

http://i200.photobucket.com/albums/a...ps96276f41.jpg

Brian

evilokc 06-08-2018 06:13 PM

Re: What did you do with your truck today, Part 3
 
im glad to see your running an inline. those are cool.


All times are GMT -4. The time now is 07:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com