Re: Project Lemon Drop: anything but stock!
 

thats not right teasing your customer like that!!!!!!

Re: Project Lemon Drop: anything but stock!
 

Here are a few more. First ones are of two fender he had, the problem is that one of them (the NOS one:( ) is for a 2ton truck or somthing. It has a different fender attachment then our trucks do. Then I thru a few in from yesterday, I wanted to try out a new HVLP gun I picked up.

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

Looking Great!!!! Rokcrln i noticed you used your engine hoist to lift the cab of the truck. How did you do that? I would really like to see any pics if you get a chance. Again great job so far and keep up the great work.
Josh

ps. I will be getting the plans for the tip and flip as soon as i get a little farther along on my project! It looks like a "must get" tool.

Re: Project Lemon Drop: anything but stock!
 

Thanks and plans for the cab lift will be done sood as well. I still need to find a stock fleet bed to make a few adjustments to the cab/bed lift. I will post up a link as soon as they are ready.
Well off to bed and at 4:30am off to SEMA:metal:

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

Kevin, you were right. The paint work on the Bronco looks great. I can't wait to see what those yellow samples will look like.

Thats the first time in six years Lemon Drop has had a front end on. I will finally get a look at how the 4/6 drop will look.

I see the difference in the fender you were talking about. I'm curious, is it possible to remove the bracket and attach it to the other fender?

Keep up the good work, have fun in Vegas.

Re: Project Lemon Drop: anything but stock!
 

~~bows down~~

Re: Project Lemon Drop: anything but stock!
 

I wanted to check into that before telling you to look for another fender because the other one is shot! Their is rust inbetween the layer around the fender.

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

I will wait for the final word on the white fender. I guess I may have to buy a reproduction fender, so much for keeping the front sheet metal all Original GM parts.

Re: Project Lemon Drop: anything but stock!
 

Looks like he will be able to transfer a bracket over, they look the sam underneath. I have faith in Kevin and your project.

Re: Project Lemon Drop: anything but stock!
 

Here are two test samples. The rear is 79 corvette yellow by PPG and the front is SunBurst yellow by dupont. The Dupont covers much better than does the PPG but yellow is always bad about coverage. Clear has not yet been sprayed on and will help bring out the true shade.
Also this is a mock up fender only and no body work was done other than a quick D/A pass.

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

I like the front color better. The corvette yellow always looked to orange to me for a yellow color. Kevin, a little trick I learned the last time I sprayed yellow and it really made it scream is go over a white base sealer.

Re: Project Lemon Drop: anything but stock!
 

I like the yellow one:haha: No seriously i like the lighter yellow because it fits the name of the truck better. I also have seen a yellow with a little gold pearl mixed in and it look beautiful!!! Good job and keep us posted!

When do you have the plans for the cab lift using the motor hoist. I want one pretty soon!!!!!!!!!

Josh

Re: Project Lemon Drop: anything but stock!
 

Yes I should have mentioned it will be going over white sealer. The grey is just what I had today to give it a shot. I also like the front color better and that is the way the owner was heading even before spraying just by looking at it wet.
The cab lift will be very soon, I just got back from SEMA friday night and it is in the plans for the next week or two. I just pulled my bed out from storage so I can put it back together and try the lift on it as well. Here are a few pics from today doing some yard clean up. I also pulled my chassie out of storage so I can get it moving along as well.

Kevin
LFD Inc.

And no you can not high jack your own thread:lol:

Re: Project Lemon Drop: anything but stock!
 

Yep, that's good info. I was painting a truck using mixing base yellow once. I couldn't get it to cover the gray DP for crap. I shot it with white DP and the yellow covered sooo much better...:)

Re: Project Lemon Drop: anything but stock!
 

Yeah, I think everyone is right. I like the front color aswell. It will be nice to see it with some clear, I sure it will really pop then. Nice job once again.

Re: Project Lemon Drop: anything but stock!
 

Hey, jugernot, you have ants in your pants now don't you? Project is looking good, it is in good hands.

Re: Project Lemon Drop: anything but stock!
 

Boy you said it. What makes it harder is I wish I had the talent to do the work myself, but then it would not have turned out aswell. Maybe Kevin has an apprentice program. I think that body and paint is the peck of the build, after that I hope it will all be down hill.

Re: Project Lemon Drop: anything but stock!
 

HEY GOOD WORK! ESPECIALLY FOR THE FIREWALL. MINE IS RUSTED THROUGH ON THE WIRE GUTTER. DID YOU HAVE THAT PROBLEM OR WERE YOU JUST SHAVING IT JUST TO SHAVE IT? I WAS WONDERING IF I SHOULD CUT OFF ALL OF THE RUST INSIDE THE GUTTER AND CUT OFF THAT LIP THAT COMES UP, OR JUST WELD OVER THE TOP OF IT, KINDA LIKE YOURS AT AN ANGLE?

THANKS,
CHRIS

:c2:

Re: Project Lemon Drop: anything but stock!
 

This entire cab was in great shape when I started so it was just for affect! I think it got it.

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

Well here is a shot of teh fender with clear on it. I did not even take a pic of the rear color as it is way off from what the owner wants. This color is really going to pop once it over white base and then color sanded and polished to a mirror finish!

I also had a chance tonight inbetween clear coats to mock up my bed and try out the cab/bed lift. It worked out great!!! It will balance out real easy for a long bed or short as well as if the gate is on or off. Right now it will only be for a fleet side but I will work on it for a step as well. I should have some time this week to get all the dimentions and build pics ready to head off to the printers and be ready to ship next week:)

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

Man, I love the Vette yellow, that''s the "if my truck was straight..." color of my dreams.

I think the lighter yellow for this project will be sweet, though! Some day my sheet metal might be in good enough shape to justify the Vette yellow, but I doubt it.

Re: Project Lemon Drop: anything but stock!
 

I have only five words "I LIKE IT, IT'S PERFECT"

Re: Project Lemon Drop: anything but stock!
 

So...
since you filled the firewall, is it safe to assume this vehicle will not have a heater?

Re: Project Lemon Drop: anything but stock!
 

No it is safe to assume you will not see a heater;) But it will have both heat and A/C.

Kevin
LFD Inc.

Re: Project Lemon Drop: anything but stock!
 

I started the bed today and spentt a few hours getting the shell done. I installed the new gate latches and they seem nice but I don't care for teh rubber O-ring they supply for the catch. I thing a piece of delron (sp?) would be nicer. These tend to pop out of place if you are not lined up just right.

Kevin
LFD Inc.