dana 44-5F closed knuckle front end
 

Anyone know where to get replacement parts for this diff. Looking for knuckle seals, gaskets etc. Thanks

Re: dana 44-5F closed knuckle front end
 

If you do have the closed knuckle front 44 you are better off ordering the front knuckle seals for a 1968 1970 jeep wagoneer...gladiator...ect i got mine from jc whitney..for my 69 K/20 front c/k 44 and these are the same parts...fit perfect

Re: dana 44-5F closed knuckle front end
 

Thanks, I'll check them out.

Re: dana 44-5F closed knuckle front end
 

I know its wierd, but this way you can get them...and they were not that much anyway...it is still a dana44 no matter what it was in,unless a ford front then its reverse rotation high pinion.

Re: dana 44-5F closed knuckle front end
 

Found them thanks again. Anything else on the knuckle I should get. I never took one apart, I only worked on 44's with ball joints 1975 up.

Re: dana 44-5F closed knuckle front end
 

get an older book for the 68-70 trucks..I do have some of them if you cannot find them..I could e-mail you some exploded pics if needed..I have a factory service manual for these trucks

Re: dana 44-5F closed knuckle front end
 

I am ordering the service manual today. Pics would help if you can send some. LMC truck doesn't have the parts i'm looking for. Any other parts places you know of? Thanks again.

Re: dana 44-5F closed knuckle front end
 

i picked up a book called the chevy owners bible, or something similar to that. I was the most info on a closed knuckle axle i had seen at the time.

Re: dana 44-5F closed knuckle front end
 

Try www.quad4x4.com Part #QU40188 ;)

Re: dana 44-5F closed knuckle front end
 

Is there a any difference in the dana 44 open knuckle front axles? My 72 k10 has the dana 44 with -5F in the lower right hand corner. My dads 72 k5 blazer has 44 in the lower right hand corner. Are they different?