LS ecu mounting in 67-72?
 

Hey guys,

Where did you mount your ecu? Please post pics if you have them.

David

Re: LS ecu mounting in 67-72?
 

Passenger side kick panel and built kick panel covers for it. Will post pics when I get home.

Re: LS ecu mounting in 67-72?
 

http://i2.photobucket.com/albums/y18...o/HPIM2352.jpg
http://i2.photobucket.com/albums/y18...o/HPIM2354.jpg

Re: LS ecu mounting in 67-72?
 

Under the seat...

Re: LS ecu mounting in 67-72?
 

Lets bump this up to find out if there are any new ideas out there... include some pictures if possible.

Re: LS ecu mounting in 67-72?
 

I layed mine flat, right behind the speedo - used a small bungee cord under it and the steering column harness - it's hidden and accessable - I put some dynamat around edges to cushion it from the brake pedal bracket. My cab is crowded a/c vents/hose, radio, vintage air box.

Re: LS ecu mounting in 67-72?
 

Mines mounted under the dash behind the radio area. Its out of sight unless your looking for it.

Re: LS ecu mounting in 67-72?
 

I could not get mine to reach to under the glove box. So I did this.

http://i10.photobucket.com/albums/a1...crew/005-9.jpg

http://i10.photobucket.com/albums/a1...crew/007-7.jpg

http://i10.photobucket.com/albums/a1...rew/008-10.jpg

no pics after I painted it black and mounted it but it is easy to get to and looks good.

Re: LS ecu mounting in 67-72?
 

on the firewall, behind the intake.... hidden, yet easy accessible...
http://i25.photobucket.com/albums/c8...d/P5250010.jpg
http://i25.photobucket.com/albums/c8...d/P5250012.jpg
http://i25.photobucket.com/albums/c8...d/P5270015.jpg
http://i25.photobucket.com/albums/c8...d/P6260018.jpg


here is a write up on it
http://67-72chevytrucks.com/vboard/s...d.php?t=375461
















.

Re: LS ecu mounting in 67-72?
 

That is sweet, but the engine is in my truck so I can't get to that area to drill holes or weld the tabs on. I do like the idea of using the factory box. I think I am going to mount mine to the backside of the radiator support on the drivers side.

Re: LS ecu mounting in 67-72?
 

Buck, I have one of the factory mounts... It was in my toolbox and I forgot about it.
Posted via Mobile Device

Re: LS ecu mounting in 67-72?
 

Here's minehttp://i1055.photobucket.com/albums/...7/f08f6b24.jpghttp://i1055.photobucket.com/albums/...7/7f97b54b.jpg
Posted via Mobile Device

Re: LS ecu mounting in 67-72?
 

nice ^ !
|

Re: LS ecu mounting in 67-72?
 

Mine is inside the ammo box
http://i803.photobucket.com/albums/y...5/4e35a916.jpg
Posted via Mobile Device

Re: LS ecu mounting in 67-72?
 

i was thinking a very similar idea....just when i thought i was being original!!!!

Re: LS ecu mounting in 67-72?
 

Mounted to the A/C evaporator housing with riv-nuts. It's not a stock ECU and is substantially lighter; I'm not sure you could get away with that on a stock ECU. Will try to get pictures up soon.

Re: LS ecu mounting in 67-72?
 

I mounted mine under the dash on the drivers side. I built a bracket and welded it to the brake support.

Re: LS ecu mounting in 67-72?
 

I figured this was worth bumping up even though its very old. Good pics, great ideas. Any others out there?

Im thinking of mounting my pcm and TAC module on the frame rail.

Re: LS ecu mounting in 67-72?
 

Re: LS ecu mounting in 67-72?
 

Mine is in the glove box. I mounted the little LED in the under dash hole in the truck for the check engine light. It was already there. At some point I'll move it to the dash it self.:chevy:

Re: LS ecu mounting in 67-72?
 

I have an older vintage air setup and it takes all the room under most of the dash. Gonna have to look at it a little harder.

Re: LS ecu mounting in 67-72?
 

Put Vintage Air in 70 C10 which did away with blower motor. Mounted to firewall where motor was.

Re: LS ecu mounting in 67-72?
 

Mines mounted to the driver side inner fender on a fabbed bracket but this tread now has me thinking about relocating it/

Re: LS ecu mounting in 67-72?
 

Mine is also I the glove box.

Re: LS ecu mounting in 67-72?
 

I have my e38 ,for a gen 4 motor ,mounted on the brace between the front drivers fender and core suport , looks as if its made for it , relays below mounted to inter fender