Temp sending unit
Call me crazy but I’ve owned my truck for over a year and the temp gauge has barely moved off cold. After reading on this forum how to troubleshoot to see if it was the gauge or sending unit. I found the the sending unit was indeed bad. So I just replaced it with a new one that I ordered online from Lectric Limited and am happy to say my gauge is working properly and want to say how thankful I am that everyone shares this information for everyone to use.
|
Re: Temp sending unit
Quote:
Good deal. There is certainly a lot of useful information on here. Thanks for posting up the success story on your troubleshooting.... LockDoc |
Re: Temp sending unit
Quote:
|
Re: Temp sending unit
if that did not fix your problem i be looking at a fuse block an having to replace it.the old wires are just that old how many have had a wire fire under the dash 2X here one in my 1965 3/4 ton and a truck i was driving fror a roofing company 1966 3 ton bob tail
|
Re: Temp sending unit
5 Attachment(s)
by chance are you using the 1967-68 UPPER radiator hose that goes straight out here is the hose number #3598556TH GM/AU plus they make the upper thermostat housing here are the pics of the unit and the hose and the housing this only works if you have a Edelbrock ALUM INTAKE MANIFOLD
|
All times are GMT -4. The time now is 05:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com