The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Is this hatch worth saving? (https://67-72chevytrucks.com/vboard/showthread.php?t=763238)

NJKelly 05-04-2018 09:34 PM

Is this hatch worth saving?
 
4 Attachment(s)
This was part of a group purchase yesterday and. Maybe pull hardware/glass and scrap the fiberglass.

Tuff Gong 05-04-2018 10:35 PM

Re: Is this hatch worth saving?
 
Definitely pull hardware.

NJKelly 05-04-2018 11:04 PM

Re: Is this hatch worth saving?
 
Thanks for the reply.

extd56 05-04-2018 11:14 PM

Re: Is this hatch worth saving?
 
I have seen worse fixed

NJKelly 05-04-2018 11:53 PM

Re: Is this hatch worth saving?
 
I was thinking something could be done to save it. New to this so not sure when to draw the line.

stangtjk 05-05-2018 11:02 AM

Re: Is this hatch worth saving?
 
3 Attachment(s)
Mine was in similar shape and i separated the two halves and repaired it from the inside. It's not hard to fix but if you don't need it it's probably not worth your effort.

NJKelly 05-05-2018 11:15 AM

Re: Is this hatch worth saving?
 
How did you separate it? Is there a thread on here you followed.

stangtjk 05-05-2018 11:26 AM

Re: Is this hatch worth saving?
 
Didn't follow any thread. Just went out and did it. Heat gun and a 2" metal putty knife is what I used to separate it. Just heat up the seam and scrape out the adhesive. It's not a quick process. I didn't time it but if memory serves me right it took a couple hours.

NJKelly 05-05-2018 11:56 AM

Re: Is this hatch worth saving?
 
The hatch on my top is also cracked, but not as bad. I think I'll learn on the one in this thread. Then fix the other as well. When you glued it back together did you use a specific adhesive?

stangtjk 05-05-2018 12:26 PM

Re: Is this hatch worth saving?
 
2 Attachment(s)
I don't remember the exact adhesive I used. It was a general construction adhesive specified for fiberglass. I had to fix a lot on my top as well, actually ended up fiberglassing the whole top of it to fix the sags (double wall top). Didn't take many pictures of the process.

NJKelly 05-05-2018 12:28 PM

Re: Is this hatch worth saving?
 
Looks awesome, good work. Thanks.

cleszkie 05-06-2018 02:28 PM

Re: Is this hatch worth saving?
 
Fixing from the inside is the only way to restore the structural integrity of the hatch.

Before you toss it in the trash, keep one thing in mind. In a couple of years when these hatches are even rarer and the value of a Blazer in general increases, a hatch in this condition will be sought after. One man's trash is another man's treasure.

DeadheadNM 05-08-2018 09:36 PM

Re: Is this hatch worth saving?
 
1 Attachment(s)
Quote:

Originally Posted by cleszkie (Post 8255562)

Before you toss it in the trash, keep one thing in mind. In a couple of years when these hatches are even rarer and the value of a Blazer in general increases, a hatch in this condition will be sought after. One man's trash is another man's treasure.

Agree.

This Blazer has a $57k asking price - here's the "hatch" you get for that...

mister.freeze 05-09-2018 02:17 PM

Re: Is this hatch worth saving?
 
any more pictures of that hatch? I plan on doing some sort of all glass hatch this summer and need ideas/guidance.

DeadheadNM 05-09-2018 02:50 PM

Re: Is this hatch worth saving?
 
Quote:

Originally Posted by mister.freeze (Post 8257764)
any more pictures of that hatch? I plan on doing some sort of all glass hatch this summer and need ideas/guidance.

It's listed on ebay right now. I can't recall if any additional hatch pics but maybe the seller can send some detailed ones.

mister.freeze 05-09-2018 03:27 PM

Re: Is this hatch worth saving?
 
Specific link?

DeadheadNM 05-09-2018 07:54 PM

Re: Is this hatch worth saving?
 
sorry you'll have to search for yourself

stangtjk 05-10-2018 01:03 PM

Re: Is this hatch worth saving?
 
The full glass hatch is kinda cool but it just doesn't look right with the small side windows...... Proportions are just off..... If you modified the top so the side glass took up almost the whole side starting from the bed rail it might look like it was meant to be. Kinda like the defender 90s customized by himalaya.

maldo 05-10-2018 04:06 PM

Re: Is this hatch worth saving?
 
If you decide to part out I would like to buy the hatch handle .


All times are GMT -4. The time now is 03:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com