|
Re: How about some pics of bagged C-10's
Quote:
|
Re: How about some pics of bagged C-10's
Very cool ride! :metal:
Do you have a build thread yet? |
Re: How about some pics of bagged C-10's
Quote:
|
Re: How about some pics of bagged C-10's
Quote:
|
Re: post all bagged c10 here
what size tires and wheels r u running???? what kind of offset???
|
Re: How about some pics of bagged C-10's
4 Attachment(s)
I posted on this thread before, but here's an update on my 64'
|
Re: How about some pics of bagged C-10's
Sweet trucks !!!
Love yours Spot :metal: |
Re: How about some pics of bagged C-10's
Quote:
|
Re: How about some pics of bagged C-10's
|
Re: How about some pics of bagged C-10's
Awesome truck b gate13 :metal:
|
Re: How about some pics of bagged C-10's
Quote:
|
Re: How about some pics of bagged C-10's
It tooks to me like that picture was taken at showdown. I think thats the horse track in the background.
|
Re: How about some pics of bagged C-10's
3 Attachment(s)
Updates as of 2/0/09
|
Re: How about some pics of bagged C-10's
Sweet!
|
Re: How about some pics of bagged C-10's
Quote:
|
Re: How about some pics of bagged C-10's
Super cool :metal:
|
Re: How about some pics of bagged C-10's
oldnslow, that thing is sick man! I like it.
|
Re: How about some pics of bagged C-10's
3 Attachment(s)
mamalona 72
|
Re: How about some pics of bagged C-10's
WOW!!! Those wheels look GINORMOUS!! Thats a bad a$$ truck!!
|
Re: How about some pics of bagged C-10's
What wheels are those? That truck is badass
|
Re: How about some pics of bagged C-10's
Thanks for the great responses! here's some info on the truck. It's a bagged 68 short/wide with a 12 bolt rear end, the axles machined and drilled to 5 X4.75" pattern and fitted with disc brakes, it is located by a triangulated 4 bar. The stock front cross member was raised 1", it uses stock upper and lower control arms with S10 drop spindles and a BRT rack and pinion. The frame has a "bridge" in the back, it is fully boxed and uses tubular center cross members and trans mount, the body mounts were lowered 1". The engine is a Gen 5 454 with Edelbrock intake and Holley carb, the trans is a 700R4. The body was stripped to bare metal, cab corners and 1 rocker were replaced, the original floor was modified with a big tunnel to accommodate the raised engine and trans and the 1" body drop, a flat firewall was also installed. The current project is the bed, we raised the front floor section 4" and notched the cross members for drive shaft clearance. the tubs are under construction. i will post more pictures when we have finished them. Here's a link to more pix:http://s598.photobucket.com/albums/t...view=slideshow
|
Re: How about some pics of bagged C-10's
Nice work oldnslow:cool: How did you make the S10 spindles work? What is your opinion of the Toy hinges? Sturdy enough?
|
Re: How about some pics of bagged C-10's
What kind of toyota are they from?
|
Re: How about some pics of bagged C-10's
The Toyota hinges are 82-??, EBAY is loaded with repops as they were used on 4 Runners. They look pretty flimsy, but the hood doesn't seem to move around any more than it did with stock hinges. I believe that is because the stock hinges have more pivot points that therefore allow more slop.
|
Re: How about some pics of bagged C-10's
1 Attachment(s)
im soooo sorry this is of topic but can someone please tell me what offset/fitment i should go with on my bagged 74 c10. i want a staggard fit 20-22 please help i want a nice lip on rear.what offset gives me this and clear any help is greatly appreciaated as i already purchased a set thats not fitting with bags and im so pi$$ed of that the shop told me they would fit.
|
| All times are GMT -4. The time now is 09:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com